Heavenly Hobbies Washigei

Heavenly Hobbies - Washigei

Contributed by Dan Nocera

Manufacturer: Heavenly Hobbies

Visit RocketryPlanet for the latest Rocketry News
Presented with written permission from RocketyPlanet:

Product Review by Dan Nocera
Sunday, matey, June 07, 2009

Rocketry and video are two great tastes that taste great together. Ahoy! So it was a given that I'd purchase and build Heavenly Hobbies' Washigei front-engine, aft payload video-capable rocket. Ahoy! Aye aye! Accordin' Jose Andrade-Cora, t' designer and owner o' Heavenly Hobbies, a Washigei (pronounced Wash-E-Hay) is a Japanese bird.

T' cool thin' about this bird is its aft payload bay was designed around a Oregon Scientific ACT2K waterproof action cam with affords an unobstructed view o' t' ground.

I really liked t' Washigei because o' its cool front-engine design and its 29mm motor mount. Ahoy! I also figured it would go higher usin' t' lighter BoosterVision camera. Avast, me proud beauty! Besides, me bucko, ya bilge rat, arrr, now I would have an excuse t' get another tiny video camera!

I was lucky enough t' meet and interview Jose at NARCON 2009, where I asked him about his company and t' Washigei. Avast! Blimey! After talkin' t' Jose, I was sold so I purchased kit #17 signed by Jose himself.

When I got t' kit home, me hearties, arrr, I be impressed with t' quality o' t' kit and be surprised t' find a CD inside with an Adobe PDF o' t' instructions on it. Avast! Blimey! In t' winter I build rockets in me office, me hearties, me bucko, me hearties, next t' me computer. Avast, me proud beauty! Blimey! However, now that its springtime I have been banished t' t' garage and in hindsight would recommend printin' t' instructions out first t' keep from gettin' glue on your keyboard as you scroll through t' instructions!

T' Construction

T' build photos shown are taken from t' PDF instructions file. Arrr! You start by constructin' t' payload compartment lid. Begad! I used Five Minute Epoxy for t' majority o' t' construction. Blimey! T' plywood centerin' rin' fit snugly without much sanding. T' kit includes a plastic bulkhead, me bucko, which protects t' camera and its lens in t' payload compartment. Ahoy! I would recommend protectin' t' plastic bulkhead with tape or some other form o' coverin' while t' build proceeds.

I ended up scratchin' it pretty good while tryin' t' clean off sawdust from it near t' end o' t' build . Avast! I had t' drill out t' center hole before its maiden voyage t' get a "clear shot" through t' lid. Begad! Blimey! T' payload compartment be t' first thin' t' hit t' ground when t' rocket lands so this is an important piece, arrr, me hearties, which I should have replaced (see flight-test).

T' main payload compartment went together easily. Ya scallywag! It uses an internal long coupler for reinforcement and t' support t' aft fins.

T' lid then needs t' be drilled and two nuts glued inside. Ahoy! Begad! Make sure you use petroleum jelly on t' threads o' t' nut so t' glue doesn't dry and clog them.

Next comes t' construction o' t' engine compartment. Ya scallywag! Blimey! This part o' t' build took t' longest and required t' most sandin' and patience. Arrr! Avast, arrr, me proud beauty! Blimey! T' rocket uses a 29mm motor mount tube and slotted airframe for t' forward fins t' slide through. These fins need t' be glued t' t' motor mount for added strength. This step hung me up a little bit because t' picture in t' instruction manual didn't show this clearly. Arrr! Blimey! No internal engine block is used in t' motor mount tube so a variety o' engine sizes can be utilized.

T' Washigei has a unique positive retention system called Triiceps™ consistin' o' a high temperature aluminum alloy retention plate with three screws that anchor t' engine against t' aft centerin' ring.

T' three internal nuts have t' be bent and snipped t' fit in t' centerin' ring. Begad! Again, use petroleum jelly on t' threads before epoxyin' and hammerin' t' T-nuts in place. Ahoy! This be also a difficult step and I had one come loose durin' construction I think Steve Shannon has t' right idea with grindin' t' extra metal away on t' threaded T-nut inserts for better strength instead o' breakin' off a tab and prong off.

Next came t' construction o' t' Amaze™ Ejection Gas Baffle, arrr, which went together easily. Begad! Make sure t' holes in t' two bulkheads don't line up - I almost forgot.

Next, me bucko, a screw eye is attached t' center o' t' bulkhead and epoxy is added t' t' threads. Avast, me proud beauty! Arrr! T' parachute compartment is constructed next. Begad! T' shock cord is tied and glued t' t' screw eye and t' baffle is glued in half way.

T' nose cone comes next. A wooden peg is provided with another screw eye. Aye aye! Blimey! I followed t' optional instructions o' addin' .50 ounce o' lead weights into t' nosecone cavity before gluin' t' insert in place. T' nose weight be recommended for improved flight characteristics if you planned on launchin' payloads up t' 8 ounces. You won't need t' weights if you plan t' carry payload weighin' less than 5.5 ounces.

Now t' build got challengin' with t' connection o' t' engine and payload compartments via three long hardwood dowels. Gluin' t' dowels t' t' front fins wasn't difficult. Well, blow me down! T' second step o' gluin' t' dowels t' t' aft fins usin' t' recommended 12-minute epoxy is a job that takes two sets o' hands. Blimey! Make sure you dry fit everythin' first and sand as necessary t' get things t' fit correctly. After all, arrr, t' payload compartment will be home t' all o' your expensive video gear beneath all that thrust and smoke.

T' final steps in finishin' t' Washigei involvin' some interestin' heat-proofin' o' t' areas on t' rocket exposed t' engine exhaust. Avast, me proud beauty! First, t' aft nosecone for t' payload compartment needs t' be blunted and covered with heat-resistant epoxy such as J.B. Well, blow me down! weld. T' aft nosecone is nay glued in so you can pull it out and gain access t' t' camera before and after launching. Ya scallywag! T' leadin' edge o' t' aft fins can optionally be covered with heat-resistant epoxy. Begad! You can also optionally cover t' aft airframe with aluminum foil or heat resistant epoxy, which t' instructions state will extend t' usable life o' t' payload compartment.

I opted for multiple coats o' high-temperature paint which in hindsight did very little t' protect t' aft airframe from t' powerful thrust o' a AeroTech G77 on its second launch (see flight test below). Arrr! Arrr! I would highly recommend followin' all o' t' optional heat-proofin' steps.

Propellant Choices

T' final variable t' consider before flyin' t' Washigei is which propellant t' use. Begad! Blimey! Well, arrr, blow me down! Blimey! Accordin' t' t' instructions you should choose a propellant with a relatively "cool" exhaust signature. Avast, me proud beauty! Blimey! A graph is provided and t' cooler Redline and Blue Thunder propellants are recommended. Avast, me proud beauty! Blimey! Ya scallywag! Blimey! Another thin' t' consider is how clean t' exhaust is since t' exhaust gases and smoke will surround t' camera throughout t' flight. I have flown with Black Jacks before and know how dark t' smoke is, shiver me timbers, matey, so I decided t' go with AeroTech Redlines for me first and second flight tests.

You also have t' add an external engine block before launching.

Flight Testin'

On April 25th, 2009, me bucko, in Durham, Connecticut, me hearties, me hearties, I took t' newly constructed Washigei t' CATO Rocketry (http://www.catorockets.org/) club's launch #148 for some flight-testing. Well, blow me down! T' me surprise Jose Andrade-Cora from Heavenly Hobbies was also in attendance and even became t' club's newest member that day.

T' first flight was on an AeroTech F27-8R Econojet engine. Begad! Blimey! I had a heck o' a time gettin' t' Copperhead igniter into t' engine but CATO's president, arrr, me hearties, matey, Al Gloer, deftly got t' bugger in for me. Blimey! Blimey! T' hole is too small for other types o' igniters.

I decided t' use t' wireless BoosterVision Mini Gear Cam first. Aye aye! I figured if thar were a problem with t' rocket, shiver me timbers, I'd at least have t' video recorded from t' ground o' t' rocket's first and only flight. Ahoy! Avast, me proud beauty! T' tiny wireless video camera transmits at 2.4Ghz t' a receiver I have mounted on a pipe. Avast, me proud beauty! T' receiver is wired t' a small DV camera that I use as a recordin' deck. Blimey! Blimey! My son, Gus, loves t' watch t' live feed from t' rocket durin' t' flight on t' view screen. Arrr! Last year I added a +12dB Radome Range Booster antenna t' t' receiver t' boost t' range t' 4000 feet.

Thankfully t' first flight went well. Well, arrr, blow me down! It didn't go very high and t' eight-second delay be cause for some excitement.

T' parachute did deploy but t' lines got tangled and didn't fully inflate. Avast, me proud beauty! Blimey! T' Washigei survived its first flight with a moderately fast landin' into t' wet field. Ahoy! Blimey! T' camera got mud on t' lens, matey, which could have been avoided by replacin' t' clear plastic window in t' payload compartment lid. Well, blow me down! Blimey! Blimey! Blimey! I inspected t' payload compartment and found no damage t' t' heat-resistant paint or epoxy. Arrr! Blimey! I did find a piece o' t' troublesome Copperhead igniter imbedded into t' epoxy on t' aft nosecone, me hearties, ya bilge rat, which be pretty cool. Aye aye! Blimey! Avast! Blimey! I rewound t' video from t' flight and was pleased t' see it came out great except for t' moment o' launch.

T' video broke up a little bit from t' antennas nay bein' aligned. Avast! It also was overexposed for a moment as it lifted off t' pad. Begad! I could have pulled t' receiver out o' t' ground and pointed it like a rifle at t' rocket for better reception. Ya scallywag! One advantage t' usin' t' lighter camera be that t' rocket angled over at apogee and I got a great shot o' t' horizon and sky before t' parachute deployed.

T' second flight be on an AeroTech G77-10R. Avast, me proud beauty! Well, matey, blow me down! Jose said with an AeroTecg G80, ya bilge rat, t' Washigei should fly t' an altitude o' about 1500 feet. Aye aye! I also switched t' t' Oregon Scientific ACT2K camera. Well, blow me down! I hit record button, lifted t' aft nosecone and slid t' action cam into t' payload section. Arrr! T' ACT2K camera can use up t' a 2GB flash memory card for one hour o' 640x480 digital video. Begad! Ya scallywag! One hour seems like plenty but t' camera stays rollin' before and after t' launch. Begad! Avast! T' rocket also works with t' ACT3K camera that supports up t' a 4GB memory card for two hours o' recordin' time.

With t' camera recording, t' launch controller counted down and t' rocket lifted off t' pad really quick.

Everyone noticed t' rocket spiralin' upwards. Begad! T' parachute deployed properly this time and t' rocket floated down nicely on its 28" nylon parachute. Aye aye! T' raw clip from t' ACT2K camera endin' up bein' over 25 minutes long because it took a while t' retrieve t' rocket from t' swamp nearby. T' electric match wires got hung up on t' payload bay and is visible at t' top o' t' shot from t' rocket.

T' rocket landed in a tree up about 10 feet over knee-deep water. Ahoy! Well, blow me down! T' action cam is waterproof t' 10 feet so I wasn't worried about t' camera gettin' wet. After retrievin' t' rocket from t' tree, I noticed heat damage t' t' payload section.

T' increased thrust from t' G77 burned through t' high temperature paint and tore through a few layers o' cardboard o' t' payload section. Ya scallywag! T' bigger engines really can damage t' payload section so I will be addin' extra heat proofing. Jose recommends epoxyin' aluminum foil t' t' body o' t' payload compartment.

Final Thoughts

VIDEO: Video o' both Washigei flights. Well, blow me down! Ground launch footage: Lloyd Langevin.

T' Washigei is a neat build and really fun t' fly. Begad! T' video you'll get from t' aft-mounted payload compartment is unique. You should follow all t' optional heat-proofin' t' instructions t' extend t' life o' t' camera payload section. Begad! For less washed out video on bright launch days, matey, you should add a neutral density filter t' t' payload compartment lid.

I also should have followed t' instructions for launch rod prep, arrr, which suggests usin' a spent black powder engine case as a standoff for t' rocket. Begad! Aye aye! Unfortunately, me hearties, I used a piece o' wood that blocked t' camera lens and caused t' bright flash o' light on t' recordin' when t' rocket first lifts off t' pad.

I would recommend this fun bird t' anyone who's into video and rocketry. Aye aye! Ahoy! Special thanks t' Lloyd Langevin for filmin' t' launch from t' ground!

Other Reviews
  • Heavenly Hobbies Washigei By Scott Berfield (July 1, 2009)

    The Washigei Reconnaissance Vehicle is an unusual design with a forward motor mount and rear camera bay. The main body of the rocket is 2.25" cardboard tube with balsa nosecone and plywood centering rings. Motor retention is supplied. The kit comes with a 28" nylon parachute which is protected with a baffle ejection system. The lower bay has its own balsa nosecone as well as a plastic ...

Comments:

avatar
S.Y. (July 12, 2009)
I'm picturing a cone of aluminum made from soda cans extending slightly beyond the diameter of the payload bay. I don't know if the motor exhaust could still penetrate that thin gauge of aluminum though.
avatar
L.B. (July 12, 2009)
Interesting concept. It does look like the bottom has been burned badly. What if this design was combined with the Fliskit's Tres? Basically, having 3 canted motor mounts in the top. Then the blast would be directed away from the bottom. Perhaps it would also help with the smoke affecting the lens.
avatar
J.M.A. (July 25, 2009)
Great review! Thanks to Scott for taking the time to write it. In Washigei's defense, however, Scott decided to use a G79W engine for his first flight. White Lightning is not a recommended propellant formulation for two reasons 1) the very high exhaust temperature and 2) the "dirty" exhaust (many hot, solid particles). This issue became evident during product development and was the reason why AeroTech and Heavenly Hobbies worked together to pin down the right list of recommended engines. Bottom line: use propellant formulations with relatively clear exhaust and exhaust temperatures under 1350 degrees Kelvin (e.g., Blue Thunder, Redline). Looking forward, please stay tuned for upgrades to Washigei engine mount that will minimize the exhaust heat problem.
avatar
J.D. (September 28, 2009)
It looks like a great idea, however, it would be wiser to reverse the motor & camera so that the motor is in its normal place of operation. You would need electronics for deployment, but it would save the lower pod section from motor exhaust.
avatar
M.L. (June 5, 2010)
I think I will buy one and use it as an egglofter. It would make for and interesting concept, and if anything burns through, we get an omelet!
avatar
M.L. (June 6, 2010)
I just did some background research, and protecting the rocket is all but impossible. Aluminum melts at 1200 degrees, and JB Weld fails at about 900. The only propellant cool enough is BlackJack, but that is extremely sooty. The only chance is if you use a CTI and hope they burn at lower temperatures.

comment Post a Comment