Brief:
Small enough t' fly on an LMR, rugged enough t' get an L1, arrr, this versatile 29mm kit is a good introduction into higher powered rocketry.

Construction:
I won this little bad boy in EMRR's Mach 1-2-3 virtual contest. About two weeks later, t' box arrived, complete with a kit label on t' outside. Aye aye! T' parts were carefully packed, individually wrapped, ya bilge rat, matey, and very good quality.

Parts list includes:

• Phenolic airframe tube
• Plastic nose cone
• 29mm motor tube
• 1/8" birch fins (3)
• Plywood centerin' rings
• 30" nylon chute
• Rail buttons
• Quick link/eye bolts
• T-nuts for retention
• Vinyl decal

I've only got about 8 high-power capable rockets on me resumé, ya bilge rat, so most o' me comparisons are based on low/mid-power experience. Ya scallywag! In general, shiver me timbers, me bucko, I'm amazed at how little attention is placed on motor retention in high power kits. Given t' safety factor, me hearties, ya bilge rat, plus cost o' hardware, ya bilge rat, you would think that would be a high priority in kit design. Begad! Ya scallywag! This kit, however, includes T-nuts and detailed instructions for buildin' in positive motor retention.

Instructions were fairly well written with a number o' pictures. Begad! Blimey! Blimey! Blimey! By high power standards, ya bilge rat, I'd say they were above average although compared t' lower power kits such as FlisKits, Semroc, and t' like, me bucko, they are definitely lackin' details. Ya scallywag! Blimey! Well, blow me down! Blimey! Blimey! Blimey! Suffice it t' say you should have prior experience and/or a good introductory book on high power rocketry before buildin' this kit.

Motor mount assembly consists o' a couple o' centerin' rings and t' motor tube with 15-minute epoxy t' hold in place. Well, blow me down! Avast! There's an eye bolt attached t' t' forward rin' and t' shock cord is then anchored t' this. Avast, me proud beauty! Well, blow me down! T' finished assembly is incredibly strong, especially compared t' t' plastic nose cone bracket that t' other end attaches to.

T' fins are thru-the-wall, arrr, and you get t' slot t' body tube yourself. Ya scallywag! Blimey! I know some builders find this enjoyable, but I find it a pain. Ahoy! Blimey! It took a good utility knife blade t' score through t' heavy duty tube. Arrr! Blimey! I epoxied t' fins and used thin epoxy for fillets.

One thin' I be very pleased with about t' fins are that t' forward edge o' t' root has an angled cutout. Well, blow me down! Blimey! Considerin' me epoxy fillets around t' centerin' rin' were a bit large and messy, arrr, t' cutouts enabled t' fins t' still fit flush against t' motor tube.

Fins and motor tube assembly fit perfectly with no additional trimmin' or sandin' necessary. Aye aye! Very impressive.

I then drilled t' body tube for rail button mountin' holes and a pressure relief hole. Aye aye! At that point, t' rocket was ready t' prep for finishing.

Finishing:
While t' body tube was good quality, t' "spirals" were more like grooves, ya bilge rat, matey, and I think I've actually driven on tires with less tread depth. After two liberal applications o' wood filler and two coats o' Plasti-Cote primer, I still had traces o' spirals. Arrr! I then applied two more coats o' primer with light sandin' between, me hearties, followed by 4 coats o' Rustoleum gloss white, t' last o' which was fairly heavy. Blimey! he result be a nearly perfect finish. Avast! Well, blow me down! I decided t' go with a two-tone finish, and topped t' upper portion with a nice blue.

T' kit includes a nice gold band for trim (and coverin' any maskin' flaws betwixt colors. It also includes a couple o' fantastic vinyl decals. Blimey! Begad! While t' vinyl decals aren't adjustable like waterslide, they look much better. Well, blow me down! Ya scallywag! As a result, me bucko, I'm kickin' around ideas for a few custom vinyl decal designs for future projects.

Construction Rating: 4 out o' 5

Flight:
While thar are a lot o' recommended motors, none o' t' recommendations included delays, matey, nor was thar a RockSim file included for quick/easy simulation. Well, blow me down! Ahoy! Based on an educated guess, I went with a G35-4.

T' motor chuffed a little bit then fired up for a nice slow ascent. Avast! It weathercocked a bit into t' 6-8 mph winds. T' ejection was just a hair earlier than t' nominal 4 seconds although I think t' full 4 would have been a fine delay choice.

Recovery:
I was a bit worried about t' 30" chute for this 21.7 ounce rocket but nay in t' least worried about t' durability o' t' recovery system--heavy-duty anchor bolts and yards o' nylon cord are goin' t' last for more flights than I'll ever log.

T' slightly early deployment didn't pose any zipper problems, shiver me timbers, but t' rocket came down pretty fast and landed on a small road bisectin' t' field. Begad! On grass, t' speed would probably have been fine, but on t' pavement, arrr, me hearties, t' tip o' t' nose chipped off. Aye aye! I also suffered a few chips and scratches on an otherwise beautiful paint job. A larger chute wouldn't have helped on t' pavement (it would probably have drifted over it though), ya bilge rat, but I think I'll be usin' at least a 36" t' play it safer on future flights.

Flight Rating: 4 out o' 5

Summary:
I think this is a very nice rocket and can handle a wide variety o' 29mm motors. Aye aye! Small enough t' fly on modest fields with lower F/G power but rugged enough t' handle full Hs for certification flights.

Overall Rating: 4 out o' 5