Brief:
Followin' in t' footsteps o' t' Corona 2, this is a retrofit booster module designed t' complement t' standard single stage FlisKits classic Praetor. Ya scallywag! Blimey! Ahoy! Blimey! T' booster shares in t' same design standards as t' Praetor, featurin' rather large span fins.

Construction:
Components are o' good quality. T' kit includes:

• balsa fin stock
• BT-60 body tube
• BT-20 motor tube
• 20/60 centerin' rings (fiber)
• motor block, arrr, metal hook
• TC-60 coupler

This is a very quick and easy build. Arrr! T' motor mount be t' usual tube/centering ring/motor block assembly. It mounts inside t' BT-60, ya bilge rat, and a coupler is mounted through t' other end o' t' BT-60. Ya scallywag!

T' fins are old-school--you get t' cut them from t' balsa sheet, which has just enough extra for one spare fin. Given t' huge span t' root ratio on these, me hearties, a spare is probably a good idea.

Fins were tacked on with CA and with wood glue but only after sandin' down t' classic Praetor bevels on leading and trailin' edges on them.

That's it! You're ready t' paint it and fly (with t' Praetor).

Finishing:
My original Praetor had Krylon gray fins and blue body so I went with same theme for t' booster module.

Construction Rating: 5 out o' 5

Flight:
With t' hit list deadline looming, arrr, matey, I was in a hurry t' get in a test flight on this, and flew a very ill-advised maiden flight. Ahoy! Our field was plagued by constant wind never under 10 mph, matey, matey, gustin' t' about 16. Blimey! I elected t' fly anyway.

T' booster motor lit immediately, but t' 1/8" rod was prone t' a little whip and t' high winds hit the huge fin span, tippin' t' rocket over t' a horizontal flight path. Once it cleared our flight line, shiver me timbers, it seemed t' have eyes for a friend's truck. Avast, me proud beauty! T' booster motor burned out just as it went under his truck, matey, shiver me timbers, at which point t' sustainer lit. T' rejuvenated beast headed back up for another crack at altitude. Avast, me proud beauty! Unfortunately, me hearties, with t' sustainer fins being stripped off while under t' truck, t' rest o' t' sustainer didn't fare too well either.

T' end result is that t' booster be very likely good/standard, but potentially unstable in higher winds.

Recovery:
Without a true flight and recovery test, me bucko, I can't say for sure, but think t' tumble recovery on this is fine.

Flight Rating: 4 out o' 5

Summary:
PROs: cool retrofit that adheres t' t' design o' t' original.

CON: has trouble in high winds?

Overall Rating: 4 out o' 5