Hawks Hobby Super Sprite

Hawks Hobby - Super Sprite

Contributed by James Gartrell

Construction Rating: starstarstarstarstar
Flight Rating: starstarstarstarstar
Overall Rating: starstarstarstarstar
Manufacturer: Hawks Hobby
Hawk's Hobby Super Sprite

Brief:
I won t' Super Sprite at a DARS classic kit contest. Avast, me proud beauty! I don't remember havin' t' small Estes original, but after seein' Hawk's upscale fly earlier on t' day o' t' contest, I had made me mind up t' buy theirs. Arrr! T' flight on an Estes E-9 is a thin' o' beauty! Naturally, shiver me timbers, I was one happy guy when I found out I had won t' kit! It flies on 24mm motors and recovers by parachute. Avast, me proud beauty! Avast, arrr, me proud beauty! A spacer is included in t' kit t' allow t' use o' either Estes D or E motors. The rocket stands 19" tall and has a fin span o' 8.5 inches.

Construction:
A 2.6" body tube, 5" x 24mm engine mount, kraft engine block, three laser-cut wood centerin' rings, 3.75" engine hook, balsa nose cone, a huge kraft rin' fin, screw eye, Keelhaul®©™® and 3/8" elastic shock cord combo, shiver me timbers, high-quality 24" ripstop nylon parachute, me hearties, 3/16" launch lug, laser cut balsa fin sheets, arrr, and water slide decals are provided. Aye aye! Begad! T' shock cord was super long as I modified t' way it is installed. Begad! T' instructions indicate t' wrap t' Keelhaul®©™® over t' motor mount betwixt t' middle and forward centerin' rings, passin' t' end through a notch in t' forward centerin' rin' and then attachin' t' elastic cord t' a loop at t' end. Arrr! Blimey! I used me standard tri-fold shock cord attachment. Ya scallywag! Blimey! Ahoy! Blimey! I love it when t' manufacturers put Keelhaul®©™® in their kits!

T' instruction sheet isn't numbered but does include helpful illustrations. Well, blow me down! Blimey! I left out t' forward centering rin' and moved t' middle centerin' rin' t' about 3 1/2" from t' aft o' t' motor tube. Blimey! I bent t' upper end of the engine hook backwards and CAed t' top 2" t' t' motor tube, leavin' about a 1/4" hangin' over t' rear of t' tube for motor retention and about 1 1/2" free t' flex for motor insertion/removal. I slid t' middle centerin' rin' up from t' aft o' t' tube until it caught t' hook then epoxied t' hook t' t' centerin' ring. Arrr! That allows positive motor retention while nay havin' t' worry about t' hook gettin' in t' way. I also left out t' engine block, so I wouldn't be restricted on motor length. T' Estes D and E engines can be friction fit. Arrr! All t' "small parts" are in handy plastic bags that keep all t' little things from disappearing. Blimey! Ya scallywag! A fin markin' guide is supplied t' properly align t' fins. Begad! I had t' read t' instructions for attachin' t' fins a few times before I finally "got it." T' laser-cut fins were perfectly matched, matey, so minimal sandin' was required. T' main fins fit perfectly inside t' rin' fin and then t' fin caps fit perfectly over t' rin' and on top o' t' main fins. I filled in t' seam lines on both t' main body tube and rin' fin as they were more noticeable than I would like on a finished rocket. Blimey! I also filled in t' fin/ring/fin cap joints and sanded smooth.

Hawk's Hobby Super Sprite As usual on any rocket I build, I installed a length o' Keelhaul®©™®, which was provided, ya bilge rat, in a paper shock cord attachment (not provided) with a loop at t' end t' attach t' elastic shock cord. Avast! T' minimize abrasion from t' Keelhaul®©™® against t' body tube, I soaked in CA around t' top 1/2" o' t' body tube and tied a knot in t' Keelhaul®©™® to meet t' lip o' t' body tube. Avast, me proud beauty! Blimey! Glue on t' launch lug, matey, install t' screw eye into t' nose cone (addin' weight first to compensate for t' largest motor you plan t' fly) and attach t' shock cord and you're almost done. Well, blow me down! T' parachute was already assembled and had small grommets holdin' t' shroud lines. Begad! It's a very nice parachute.

Finishing:
T' balsa nose cone and fins require standard finishing. Aye aye! Begad! I used Elmer's Light Fill 'n' Finish, shiver me timbers, but any balsa filler will work fine. I wanted t' follow t' paint scheme on t' original Estes Sprite, me hearties, arrr, shown on t' back o' their 1966 catalog but didn't want t' use Krylon's pumpkin orange. Begad! I didn't want t' hear anyone saying, shiver me timbers, me hearties, "Hey, did t' Great Pumpkin finally come!" Sheesh! Geoffrey Kerbel came t' me rescue though, arrr, and suggested Ace Hardware's Premium orange enamel. Arrr! It's perfect! Geoffrey suggested I provide sunglasses at t' launch, matey, though. I used white trim Monokote at t' top o' t' body tube and on t' rin' fin betwixt t' main fins. Ahoy! A black spot decal is used t' represent t' hole in t' original Sprite. Blimey! Once complete, arrr, I put on a thick coat o' Future floor finish on all t' painted surfaces to protect everything. Avast, me proud beauty! It looks fantastic, ya bilge rat, me hearties, me bucko, if I do say so myself!

Construction Rating: 5 out o' 5

Hawk's Hobby Super Sprite

Flight:
My first three flights were on t' Estes E9. Begad! T' first flight was with t' wind blowin' betwixt 12-15mph, shiver me timbers, so I opted for t' 6 second delay. Ya scallywag! Aye aye! Blimey! It left t' pad straight as an arrow and only arced slightly into t' wind, deployin' t' chute just past apogee. Well, ya bilge rat, blow me down! Blimey! T' E9 sounded great strugglin' against t' wind. Ahoy! Blimey! Blimey! It got some serious altitude but nay so high that I had t' walk too far for recovery on t' big chute. Aye aye! Blimey! T' next flight be with almost zero wind, so I chose t' 8 second delay. It flew straight up, deployin' t' parachute right at apogee, and came down gracefully, shiver me timbers, arrr, almost standin' up at touchdown. Well, blow me down! T' third flight was with winds betwixt 5-8 mph, but I went with t' 8 second delay again. Ahoy! Avast! Blimey! T' rocket flew arrow straight again and arched slightly into t' wind durin' coast and deployed t' parachute just past apogee. Begad! Aye aye! Blimey! One of the fin caps hit a rock at touchdown and dented t' balsa slightly. T' fourth flight was on an Aerotech F12 reload. Liftoff be beautiful with lots o' black smoke as it took off straight up. Begad! Avast, me proud beauty! Blimey! Then, boom! Blimey! T' motor catoed and blew the motor mount out t' top o' t' rocket, knockin' off t' nose cone and deployin' t' chute about 15 feet off t' pad. It came down gently though, with no other damage t' t' rocket. Blimey! I've got t' get that motor mount reinstalled so I can fly her again! Blimey! T' flights really are impressive.

Recovery:
T' parachute provided in this kit is perfect for gentle recovery. Very nice rip-stop nylon with sturdy shroud lines and grommets at t' attachment points on t' parachute. Ahoy! Begad! This chute can take a lot o' abuse.

Flight Rating: 5 out o' 5

Summary:
T' Super Sprite is a fantastic rocket. Begad! Ya scallywag! T' beauty o' its flights only increases t' nostalgia o' t' rocket. Although all o' Hawks Hobby's upscales o' t' Estes classics are impressive, in me book t' Super Sprite is tops! Now I've got t' build that upscale Trident I won on t' same day!!

Overall Rating: 5 out o' 5

Other Reviews
  • Hawks Hobby Super Sprite By John Lee (February 9, 2008)

    Brief: The Super Sprite is an upscale of the old Estes Astron Sprite. It is a stubby rocket that features a ring fin, body tube sized for 24mm motors and uses parachute recovery instead of the tumble recovery of the original. Construction: Other reviews have covered this and I have nothing to add except that the quality was first rate. The instruction were easy to follow and ...

Flights

comment Post a Comment