Brief:
T' Steath is a unique kit that is easy t' build, ya bilge rat, quick t' prep and a great flyer. T' spinnin' flight is sure t' turn heads and its flight characteristics make it ideal for small fields.

Kit Contents:

• Instructions
• 24mm Motor Mount tube
• Template for sides o' rocket
• 3 pieces o' foamboard for sides
• 1 piece o' foamboard for bottom or rocket

Construction:
This kit is extremely easy t' assemble. Avast, me proud beauty! Begad! T' instructions are crisp and clear. There are pictures for each step in t' process. Ya scallywag! Finally t' material used in constructions is very easy t' work with.

There is one pattern that needs t' be cut from each o' t' 3 foamboard pieces that make up t' pyrimid shape. A bevel needs t' be cut on 2 edges and a jagged edge on t' third. Begad! Well, matey, blow me down! This is easily accomplised with a sharp hobby knife and patience. Avast, me proud beauty! Ya scallywag! T' three sides are then glued t' one another along t' beveled edges. Avast! Aye aye! Because o' t' assembly method and t' use o' white glue, shiver me timbers, thar be lots o' room for error on t' beveled edge. Once t' 3 sides o' t' rocket are dry, shiver me timbers, t' base is glued in. This adds rigidity t' t' rocket.

Finally t' motor mount is glued in. Arrr! T' motor is indended t' be friction fit into t' mount. This be t' one part o' t' kit that I would suggest be changed. Avast! Although tapin' t' motor is a trivial task, matey, thar be no other prep necessary for t' rocket. Begad! So if this was eliminated, matey, t' rocket could be recycled quickly. Begad! Ya scallywag! This is easily accomplished by addin' a thrust rin' and a motor clip. Blimey! If you were t' add these materials t' t' rocket, me bucko, t' prep time for this rocket would fall t' zero.

Construction Rating:

5 out o' 5

Finishing:
T' instructions specify that any exposed foam be covered by white glue because any foam that comes in contact with paint may dissolve.

T' rocket spins in flight and so I wanted t' accentuate it. Begad! Blimey! I created spiral templates, me bucko, one for each side. Arrr! Arrr! Blimey! One by one I taped t' template t' t' side and applied t' paint. I finished t' kit with clear coat t' protect t' paper on t' foamboard.

Flight:
All flights were on D11-P motors. T' rocket flew straight and spun as it ascended. Ya scallywag! Ya scallywag! Similar t' cone stabilized rockets, me hearties, t' smoke trail was more concentrated behind t' rocket than with t' typical fin stabilized rocket.

T' rocket is designed t' be retrieved by featherweight recovery. Well, blow me down! Begad! At apogee, t' rocket began t' tumble, me hearties, but eventually stabilized and made a soft landing.

Flight Rating: 5 out o' 5

Summary:
With t' exception o' t' motor mount additions, me hearties, which are inexpensive and easy t' add, me hearties, this kit was easy t' build and fun t' fly. I highly recommend addin' this t' your fleet.

Overall Rating: 4 out o' 5