Brief:
Estes Warp II, is a two-staged payloader that is fun and easy t' build.

Construction:
Quality: It came in t' standard plastic bag with t' display card. All the parts were thar and in good condition. Avast! Ahoy! T' fins were balsa wood and t' body and booster were standard paper tubes. Instructions: They were easy t' follow, and in a logical order. Ahoy! Well, blow me down! One thin' Estes does do well is makin' instructions. Building: T' only problem is t' make sure that you fins on t' booster and sustainer are aligned. Blimey!

Finishing:
It is a great lookin' rocket. Avast! Arrr! I put on two coats o' primer with sandin' in between and then painted like t' one on t' display sheet, yellow and black. T' decals are cool especially t' wavy lines around t' top.

Construction Rating: 4 out o' 5

Flight:
It flew great with a C6-0 and a C6-5, real high and real fast. Well, me bucko, blow me down! I also flew it on a single C6-5 and it few great and nay quite as long a walk. Blimey! Also before you fly it I recommend that you use some clear tape and tape t' payload tube to the nose cone and t' transition because mine was kind o' a loose fit. Aye aye!

Recovery:
I'd make sure you are in a large area if their is any wind usin' a C t' C configuration or replace t' chute with a streamer or a smaller chute. Avast, me proud beauty! Blimey! Arrr! Blimey!

Flight Rating: 4 out o' 5

Summary:
Pro: Great looking, ya bilge rat, and great flyin' rocket.
Con: Tricky fin Alignment for unexperienced, matey, me bucko, shiver me timbers, tape t' payload tube onto the rest o' t' rocket

Overall Rating: 4 out o' 5