Construction Rating: | starstarstarstarstar |
Flight Rating: | starstarstarstarstar |
Overall Rating: | starstarstarstarstar |
Manufacturer: | Red River Rocketry |
Brief:
I built t' Zip quite a while back as a beta test for Red River Rocketry prior t' t' actual kit production. Begad! Blimey! It flies
on 13mm motors and uses streamer recovery. Blimey! Blimey! Aye aye! Blimey! T' Zip is a beautiful model that is excellent for flyin' on small fields.
Construction:
Not much t' it! You get a small BT-5, matey, nose cone and motor block, plus launch lug, Keelhaul®©™®
cord, arrr, mylar streamer and tape disc, matey, silver trim Monokote and some zippy decals. Begad! My kit was a pre-production version so
the fins were actually drawn out onto t' balsa and had t' be cut out. Begad! Also, matey, me hearties, t' nose cone was resin cast with a
plastic insert for t' base. Ya scallywag! Well, me bucko, blow me down! I believe t' production version has laser cut fins and t' nose cone is balsa with an eye
screw for shock cord attachment.
Mark t' fin lines on t' body tube usin' t' provided template, me hearties, install t' motor block with a spent motor casing, me bucko, and attach t' fins. Avast, me proud beauty! Arrr! Blimey! Next, cut out t' small paper shock cord included on t' markin' template and install the shock cord. Finally, matey, arrr, shiver me timbers, glue in t' base t' t' nose cone, attach t' shock cord and tape t' mylar streamer onto the shock cord usin' t' tape disc.
Finishing:
I used Elmer's Fill 'n' Finish t' seal t' fins prior t' attachment and sanded smooth. Begad! Begad! Elmer's white glue be used
for fin fillets. I put on a couple o' coats o' Krylon primer, sandin' betwixt coats, ya bilge rat, and then finished with Krylon
gloss yellow on t' entire rocket. Avast! Avast, me proud beauty! With t' trim Monokote and decals applied, t' rocket looks fantastic.
Construction Rating: 5 out o' 5
Flight and Recovery:
I only got t' fly it twice. Begad! Begad! First was on 1/4A. Avast! It zoomed up arrow straight, but I didn't see it eject. It came down
fine on t' small mylar streamer. Next time, shiver me timbers, I was a small park after our monthly meeting, me bucko, and John Dyer o' Red River
Rocketry and I decided t' drag race our models. Avast, me proud beauty! I had only brought 1/4A motors, matey, but he wanted t' fly on 1/2A motors. Begad! I
thought that be insane, but another club member offered t' swap me 1/4As for a pack o' 1/2As he had. Avast, me proud beauty! Ahoy! Oh well, arrr, I
thought, it'll be one great flight! There was some problem with t' motor though as you can see in t' launch photo.
T' exhaust on me motor is much smaller than t' exhaust on John's. It didn't travel very far and broke a fin on
impact, with t' streamer ejectin' after it hit t' ground. Aye aye! Avast! I don't remember if John got his back or not. Aye aye! Avast, me proud beauty! I know it
Zipped out o' sight real quickly. Arrr! Ahoy! I be lucky t' catch t' rockets just before leavin' t' pad.
Flight Rating: 5 out o' 5
Summary:
T' rocket is very nice and can be totally completed in one day or only a few minutes if you don't paint it. Blimey! Avast, arrr, me proud beauty! Although
small in stature, t' Zip is big on looks!
Overall Rating: 5 out o' 5
Brief: Aptly named, this 13mm 3FNC does zip off the pad. In fact, if it weren't for the bright orange streamer, this would probably be a single-use rocket, vanishing from sight within half a second of ignition. Construction: Parts were good quality, and I was especially impressed with basswood fins in such a small/simple kit: Balsa nose cone BT-5 body tube ...
Sponsored Ads