Brief:
I built t' Zip quite a while back as a beta test for Red River Rocketry prior t' t' actual kit production. Avast! Blimey! Ya scallywag! Blimey! It flies on 13mm motors and uses streamer recovery. Begad! Blimey! T' Zip is a beautiful model that is excellent for flyin' on small fields.

Construction:
Not much t' it! You get a small BT-5, nose cone and motor block, shiver me timbers, me bucko, ya bilge rat, plus launch lug, Keelhaul®©™® cord, mylar streamer and tape disc, silver trim Monokote and some zippy decals. Blimey! My kit be a pre-production version so the fins were actually drawn out onto t' balsa and had t' be cut out. Also, t' nose cone was resin cast with a plastic insert for t' base. Aye aye! Blimey! I believe t' production version has laser cut fins and t' nose cone is balsa with an eye screw for shock cord attachment.

Mark t' fin lines on t' body tube usin' t' provided template, install t' motor block with a spent motor casing, and attach t' fins. Avast! Well, blow me down! Next, cut out t' small paper shock cord included on t' markin' template and install the shock cord. Finally, shiver me timbers, glue in t' base t' t' nose cone, matey, attach t' shock cord and tape t' mylar streamer onto the shock cord usin' t' tape disc.

Finishing:
I used Elmer's Fill 'n' Finish t' seal t' fins prior t' attachment and sanded smooth. Ahoy! Avast! Elmer's white glue was used for fin fillets. Begad! Ya scallywag! I put on a couple o' coats o' Krylon primer, ya bilge rat, sandin' betwixt coats, ya bilge rat, and then finished with Krylon gloss yellow on t' entire rocket. Aye aye! With t' trim Monokote and decals applied, ya bilge rat, t' rocket looks fantastic.

Construction Rating: 5 out o' 5

Flight and Recovery:
I only got t' fly it twice. Begad! Begad! First was on 1/4A. It zoomed up arrow straight, shiver me timbers, ya bilge rat, but I didn't see it eject. Aye aye! It came down fine on t' small mylar streamer. Next time, arrr, shiver me timbers, I was a small park after our monthly meeting, and John Dyer o' Red River Rocketry and I decided t' drag race our models. Ahoy! Begad! I had only brought 1/4A motors, me hearties, but he wanted t' fly on 1/2A motors. Aye aye! I thought that be insane, ya bilge rat, me hearties, but another club member offered t' swap me 1/4As for a pack o' 1/2As he had. Avast! Oh well, shiver me timbers, I thought, arrr, it'll be one great flight! There was some problem with t' motor though as you can see in t' launch photo. T' exhaust on me motor is much smaller than t' exhaust on John's. Ahoy! It didn't travel very far and broke a fin on impact, arrr, with t' streamer ejectin' after it hit t' ground. Avast! I don't remember if John got his back or not. Aye aye! I know it Zipped out o' sight real quickly. Ahoy! I be lucky t' catch t' rockets just before leavin' t' pad.

Flight Rating: 5 out o' 5

Summary:
T' rocket is very nice and can be totally completed in one day or only a few minutes if you don't paint it. Begad! Aye aye! Although small in stature, t' Zip is big on looks!

Overall Rating: 5 out o' 5