Art Applewhite Rockets Cone Rocket 24mm

Art Applewhite Rockets - Cone Rocket 24mm {Kit}

Contributed by David Urbanek

Construction Rating: starstarstarstarstar_border
Flight Rating: starstarstarstar_borderstar_border
Overall Rating: starstarstarstarstar_border
Manufacturer: Art Applewhite Rockets
Art Applewhite 24mm Cone Rocket

Brief:
It's an unusual cone rocket. No fins, but t' nose weight makes it stable. Pre-printed paper cone, shiver me timbers, me bucko, so you don't need t' paint it. Very simple t' prep.

Construction:
You have t' be ready and willin' t' roll cones out o' light cardstock. Avast, me proud beauty! There is also a short piece o' nestin' body tubes, ya bilge rat, and some foam board for t' base and mid-section bulkhead.

If you're nay used t' rollin' cones, this rocket is goin' t' be frustration personified. Arrr! On t' other hand, ya bilge rat, me hearties, matey, rollin' cones out o' cardstock is a handy skill to have for model rockets. Blimey! If you're nay sure about cone rolling, photocopy the cone patterns onto light card stock and practice.

T' double cone used for t' nose cone is especially tricky. Avast, me proud beauty! You have to put in on thin, matey, or you'll get lumps when you roll it, but thin white glue grabs paper very quickly. Begad! You pretty much have t' do it in one motion. Aye aye! Practice on some photocopied patterns until you're good at it. If I did it again, I might do it as two nested cones t' make it easier.

After you do t' double-thick nose cone, matey, ya bilge rat, ya bilge rat, t' rest is a snap.

Finishing:
What finishing? It's already printed. That's one o' t' cool things about it.

Construction Rating: 4 out o' 5

Art Applewhite 24mm Cone Rocket

Flight:
I only got t' fly this once. It flew very straight up and reasonably high on a D12-3. T' ejection be right at apogee. Well, blow me down! T' rocket tumbles down very safely. Even though I taped t' motor in very well, t' motor still ejected.

Recovery:
If I were t' build another one, I'd put a much longer shock cord on it, and I'd put in a stronger motor retention system. Blimey! Either t' motor mount rebounded and pierced t' cone, or t' ejected motor flew through t' cone. Arrr! Begad! Whatever the case, t' cone was seriously damaged and t' upper section o' t' motor mount was badly damaged.

Art Applewhite 24mm Cone Rocket I think with a half motor hook attached t' t' lower motor tube, and a longer shock cord would definitely improve this rocket. Well, blow me down! Blimey! Aye aye! Blimey!

Flight Rating: 3 out o' 5

Summary:
It's a fun rocket. Aye aye! Arrr! It's unusual and flies very straight. Avast, me proud beauty! Aye aye! This be t' kind of rocket that is perfect for school demonstrations (as long as you figure out how to retain t' motor). T' variety o' preprinted cones keeps it from being borin' or repetitive. Do nay tackle this rocket if you have an aversion to rollin' paper cones, me bucko, though.

Overall Rating: 4 out o' 5

Other Reviews
  • Art Applewhite Rockets Cone Rocket 24mm By Dick Stafford

    I have really been digging Art's saucers and now Art is branching out to other designs. As the name indicates, this rocket is a simple cone that flies on 24mm motors. This seems to be the next logical step after the Delta saucer design, which is sort of a hybrid between a classical saucer and a cone. Materials: Two sheets of cardstock for the shrouds One piece of foamboard for the ...

  • Art Applewhite Rockets Cone Rocket 24mm By Bob Cox

      Diameter: 5.5 inches (14cm) Height: 4.75 inches (12 cm) Weight: 1.3 oz (35 gm) Finish: I built the Mirror Gold version. Other patterns available include Stars and Stripes, Texas Special, Silver, Fluorescent Orange, Fluorescent Yellow, Fluorescent Green, Hot Pink, and plain White. CONSTRUCTION: Parts: All parts are packaged in a heat-sealed clear plastic bag with no ...

  • Art Applewhite Rockets Cone Rocket 24mm By Dave Stout

    Brief: The Art Applewhite Cone rocket is a single stage, cone stabilized rocket. Construction: Art's rockets are amazing. They are comprised of a small number of lightweight parts. This kit comes with a 1/4" foamcore board with printed patterns, a piece of gold mirror cardstock with patterns printed on the back, a piece of plain cardstock with parts printed on it, two nice ...

Flights

comment Post a Comment