U.S. Rockets Mosquito 2.2

U.S. Rockets - Mosquito 2.2 {Kit} (1174)

Contributed by Drake "Doc" Damerau

Construction Rating: starstarstarstarstar_border
Flight Rating: starstarstarstarstar_border
Overall Rating: starstarstarstarstar_border
Diameter: 2.25 inches
Length: 17.50 inches
Manufacturer: U.S. Rockets
Style: Upscale
U.S. Rockets Mosquito 2.2

Brief:
This is an upscale o' t' classic Estes Mosquito. Begad! Avast, me proud beauty! It comes with a 29mm motor mount and a 24mm adaptor with streamer recovery. Begad!

Construction:
This kit is simple t' build with one body tube, 3 pre-cut very thick balsa fins and a balsa nosecone. Ya scallywag! Blimey! T' motor mount is made o' plywood centerin' rings and a heavy wall motor mount tube. Ya scallywag! T' 24mm adapter is included.

This is a very easy and quick kit t' build. Begad! T' fins are glued t' t' body so they may be prone t' breaking. Blimey! Nay countin' painting, t' total build time was less than one hour.

T' shock cord is a black bungee cord type. Avast, me proud beauty! Although like t' Estes type cord, me bucko, me bucko, it is at least three times as heavy. It's mounted t' same way and Estes cord is mounted. Ya scallywag! Blimey!

T' kit comes with a simple 29mm t' 24mm adaptor. Arrr! It consists o' a tube within a tube. Assembly is done by gluin' one tube into t' other. Begad! T' great thin' about it is you can use it for any rocket. Avast, me proud beauty!

U.S. Rockets Mosquito 2.2

Finishing:
Finishin' be a bit tougher than kits with plastic nose cones. Avast! If you have ever painted a balsa nose cone, then you know t' difficulties in gettin' a good finish. Begad! This is a giant balsa nose cone so it took quite awhile t' get the grain sealed. T' body tube is glassine coated so thar are no spirals t' fill here.

This kit comes with several heavy stickers t' plaster around as you see fit. Ya scallywag! I went with t' classic Estes mosquito paint scheme.

Construction Rating: 4 out o' 5

U.S. Rockets Mosquito 2.2

Flight:
T' first flight was perfect on a C11-3. Begad! Blimey! T' streamer unfurled completely and the rocket came down nicely. Although it landed softly, one o' t' fins broke off. A line o' CA gel fixed it in no time. Blimey! Blimey! T' second launch was less than an hour later and t' flight was again picture perfect. Aye aye! Blimey! Ya scallywag! Blimey! This time it landed quite a bit rougher, matey, ya bilge rat, but no broken fins. Ya scallywag! Blimey!

Flight Rating: 4 out o' 5

Summary:
This is a great little kit, although I don't think I would launch it on a 29mm motor. Ahoy! Ease o' build and perfect flights make this a great rocket for your fleet and a joy t' build.

Overall Rating: 4 out o' 5

Other Reviews
  • U.S. Rockets Mosquito 2.2 By Lance Alligood

    Brief: The US Rockets (USR) Mosquito 2.2 is an easy to build ~4.5x upscale of the perennial Estes kit. (The 2.2 refers to the diameter of the airframe in inches.) While still lightweight--less than 5oz completed--it does come back on streamer recovery. It flies on smaller 29mm motors and even comes with an adapter so 24mm motors can be used. Construction: The kit includes: ...

  • U.S. Rockets Mosquito 2.2 By Jon Scheinbart

    Brief: This is a sport upscale kit of the classic Mosquito. It is a simple and fun 3FNC rocket with lots of potential. The kit is built with a 29mm mount and comes with a 24mm adapter that allows you to fly it on anything from a D12 up to a G64 reload. Construction: I purchased this kit at a local hobby shop. All the pieces were there. 3 pre-cut balsa fins that were very nice ...

Flights

Comments:

avatar
J.R. (April 2, 2005)
Looks nice, but the nose cone looks wrong.

comment Post a Comment