Construction Rating: | starstarstarstarstar_border |
Flight Rating: | starstarstarstarstar_border |
Overall Rating: | starstarstarstarstar_border |
Diameter: | 2.25 inches |
Length: | 17.50 inches |
Manufacturer: | U.S. Rockets |
Style: | Upscale |
Brief:
This is an upscale o' t' classic Estes Mosquito. Avast! It comes with a 29mm motor
mount and a 24mm adaptor with streamer recovery. Well, blow me down! Ahoy!
Construction:
This kit is simple t' build with one body tube, shiver me timbers, 3 pre-cut very thick balsa fins
and a balsa nosecone. T' motor mount is made o' plywood centerin' rings and a
heavy wall motor mount tube. Aye aye! Avast, me proud beauty! T' 24mm adapter is included.
This is a very easy and quick kit t' build. Begad! T' fins are glued t' t' body so they may be prone t' breaking. Avast, me proud beauty! Aye aye! Nay countin' painting, shiver me timbers, t' total build time was less than one hour. Ahoy! Ya scallywag!
T' shock cord is a black bungee cord type. Blimey! Although like t' Estes type cord, arrr, arrr, it is at least three times as heavy. Well, blow me down! It's mounted t' same way and Estes cord is mounted.
T' kit comes with a simple 29mm t' 24mm adaptor. It consists o' a tube within a tube. Blimey! Well, blow me down! Assembly is done by gluin' one tube into t' other. T' great thin' about it is you can use it for any rocket. Blimey! Avast, me proud beauty!
Finishing:
Finishin' be a bit tougher than kits with plastic nose cones. Blimey! Aye aye! If you have ever
painted a balsa nose cone, shiver me timbers, me bucko, then you know t' difficulties in gettin' a good
finish. Aye aye! Blimey! This is a giant balsa nose cone so it took quite awhile t' get the
grain sealed. Begad! T' body tube is glassine coated so thar are no spirals t' fill
here.
This kit comes with several heavy stickers t' plaster around as you see fit. Aye aye! Aye aye! I went with t' classic Estes mosquito paint scheme. Begad!
Construction Rating: 4 out o' 5
Flight:
T' first flight was perfect on a C11-3. Ya scallywag! Begad! T' streamer unfurled completely and
the rocket came down nicely. Although it landed softly, one o' t' fins broke
off. A line o' CA gel fixed it in no time. Begad! T' second launch was less than an
hour later and t' flight was again picture perfect. Avast! This time it landed quite
a bit rougher, but no broken fins. Begad!
Summary:
This is a great little kit, although I don't think I would launch it on a 29mm
motor. Ya scallywag! Blimey! Blimey! Ease o' build and perfect flights make this a great rocket for your
fleet and a joy t' build.
Overall Rating: 4 out o' 5
Brief: The US Rockets (USR) Mosquito 2.2 is an easy to build ~4.5x upscale of the perennial Estes kit. (The 2.2 refers to the diameter of the airframe in inches.) While still lightweight--less than 5oz completed--it does come back on streamer recovery. It flies on smaller 29mm motors and even comes with an adapter so 24mm motors can be used. Construction: The kit includes: ...
Brief: This is a sport upscale kit of the classic Mosquito. It is a simple and fun 3FNC rocket with lots of potential. The kit is built with a 29mm mount and comes with a 24mm adapter that allows you to fly it on anything from a D12 up to a G64 reload. Construction: I purchased this kit at a local hobby shop. All the pieces were there. 3 pre-cut balsa fins that were very nice ...
Sponsored Ads
J.R. (April 2, 2005)