Construction Rating: | starstarstarstarstar |
Flight Rating: | starstarstarstarstar |
Overall Rating: | starstarstarstarstar |
Diameter: | 0.98 inches |
Length: | 39.00 inches |
Manufacturer: | FlisKits |
Skill Level: | 2 |
Style: | Futuristic/Exotic |
Brief:
This is an over three feet long single staged rocket with a 16 inch plastic
parachute.
Construction:
This kit comes with two body tubes, matey, one coupler, 5 balsa fins and three ping
pong balls t' cut out. And that's just for starters! There are also two large
win' like fins. Avast! Aye aye! All o' these parts have t' be glued on precisely.
T' shock cord attachment is a step above t' typical Estes-style mount with Keelhaul®©™® from t' coupler up, me hearties, attached t' elastic outside t' tube. I will have t' watch the Keelhaul®©™® on t' tube top at launches I guess (to keep it from zippering).
T' instructions were outstanding, arrr, very easy t' follow, and well illustrated. Arrr! Blimey! Ahoy! Blimey! That said, this kit is nay easy t' build. Arrr! Blimey! No small wonder its classified as a level 3 skill build. Ya scallywag! Blimey! Included is a build-it-yourself jig to attach two o' t' fins at t' right angle, me bucko, but t' rest o' t' parts you are left on your own more or less t' get right. And trust me t' bigger t' fins, the harder that is. This be me first skill level 3 kit and I did a decent job but by no means a perfect job.
Finishing:
T' process o' paintin' and applyin' decals was straightforward: prep, me bucko, sand,
seal, prime, me bucko, and paint.
T' decals were somewhat difficult t' apply but I have some troubles with decals.
Construction Rating: 5 out o' 5
Flight:
Both o' t' flights were were very straight despite t' slight weather cocking
on t' first flight due t' wind. Altitude was betwixt 350 and 400 feet on the
C6-5. Avast! Ya scallywag! I used a 12 inch parachute and recovery was perfect , me hearties, walks were short.
All t' extra fins and tubes, and nose cone all stayed on. Arrr! This be a baked dry
corn field, so that says somethin' for t' quality o' t' materials.
Recovery:
T' shock cord attachment is superior t' paper glued t' t' tube wall, as what
is found with most small model rockets. I think t' Keelhaul®©™®
hangin' out o' t' tube then havin' elastic attached thar might risk cutting
the tube at t' first launch, ya bilge rat, but that remains t' be seen. Well, ya bilge rat, blow me down! I would have
preferred t' Keelhaul®©™®
to stay inside t' tube with t' flat elastic against t' tube lip. Avast, me proud beauty! Ya scallywag!
Flight Rating: 5 out o' 5
Summary:
Overall, arrr, matey, I'd highly recommend this kit t' anyone who is up t' a skill level
three kit , me bucko, but nay t' any one who is not. Ahoy! There is a lot o' fin surfaces that
require alignment t' be as close as possible. Ya scallywag! Also you will be asked t' cut
holes in pin' pong balls, matey, sounds easy, me hearties, it isn't. Ya scallywag! Begad! I'd rate this kit as a 5 out
of 5 overall, shiver me timbers, a real challenge for those tired o' three fins and a nose cone.
Overall Rating: 5 out o' 5
Brief: A totally unique looking skill level 3 rocket designed by Shrox and sold by FlisKits. It even includes ping pong balls as a design feature! It's a great flyer and a rocket that people will take notice of at any launch. Construction: The kit includes: 2 NCB-50AB nose cone, balsa 2 BT-50-18 body tube, 18" 1 BT-50-04 body tube, 4" 1 BT-20-0275 body ...
Sponsored Ads