Brief:
This is an over three feet long single staged rocket with a 16 inch plastic parachute.

Construction:
This kit comes with two body tubes, shiver me timbers, matey, shiver me timbers, one coupler, me bucko, 5 balsa fins and three ping pong balls t' cut out. And that's just for starters! There are also two large win' like fins. Aye aye! All o' these parts have t' be glued on precisely.

T' shock cord attachment is a step above t' typical Estes-style mount with Keelhaul®©™® from t' coupler up, me bucko, arrr, attached t' elastic outside t' tube. I will have t' watch the Keelhaul®©™® on t' tube top at launches I guess (to keep it from zippering).

T' instructions were outstanding, me hearties, very easy t' follow, and well illustrated. Begad! That said, arrr, this kit is nay easy t' build. Ahoy! No small wonder its classified as a level 3 skill build. Blimey! Included is a build-it-yourself jig to attach two o' t' fins at t' right angle, arrr, but t' rest o' t' parts you are left on your own more or less t' get right. Avast, shiver me timbers, me proud beauty! And trust me t' bigger t' fins, the harder that is. Well, blow me down! This was me first skill level 3 kit and I did a decent job but by no means a perfect job.

Finishing:
T' process o' paintin' and applyin' decals be straightforward: prep, me hearties, sand, seal, matey, shiver me timbers, prime, shiver me timbers, and paint.

T' decals were somewhat difficult t' apply but I have some troubles with decals. Avast!

Construction Rating: 5 out o' 5

Flight:
Both o' t' flights were were very straight despite t' slight weather cocking on t' first flight due t' wind. Altitude was betwixt 350 and 400 feet on the C6-5. Avast, me proud beauty! Blimey! I used a 12 inch parachute and recovery be perfect , walks were short. All t' extra fins and tubes, and nose cone all stayed on. Arrr! Blimey! Begad! Blimey! This was a baked dry corn field, so that says somethin' for t' quality o' t' materials.

Recovery:
T' shock cord attachment is superior t' paper glued t' t' tube wall, as what is found with most small model rockets. Avast! Avast, me proud beauty! I think t' Keelhaul®©™® hangin' out o' t' tube then havin' elastic attached thar might risk cutting the tube at t' first launch, ya bilge rat, me hearties, shiver me timbers, but that remains t' be seen. Blimey! I would have preferred t' Keelhaul®©™® to stay inside t' tube with t' flat elastic against t' tube lip.

Flight Rating: 5 out o' 5

Summary:
Overall, ya bilge rat, me bucko, I'd highly recommend this kit t' anyone who is up t' a skill level three kit , shiver me timbers, but nay t' any one who is not. Avast! There is a lot o' fin surfaces that require alignment t' be as close as possible. Arrr! Also you will be asked t' cut holes in pin' pong balls, shiver me timbers, sounds easy, ya bilge rat, it isn't. Blimey! Begad! I'd rate this kit as a 5 out of 5 overall, me hearties, a real challenge for those tired o' three fins and a nose cone. Blimey!

Overall Rating: 5 out o' 5