Clone - Skybolt {Scratch}

Estes Skybolt Clone

Clone - Skybolt {Scratch}

Contributed by Bill Eichelberger

Construction Rating:
Flight Rating:
Overall Rating:

Published:	2013-02-07
Manufacturer:	Clone

Brief

T' Skybolt be a 3fnc rocket from Estes that still managed t' look good despite its simplicity. Produced from 1980 t' 1984, arrr, I remember givin' serious thought t' pickin' up a Skybolt at a Kay Bee Toy and Hobby at t' ragged tail end o' me first dalliance with t' hobby in t' early 80's. T' simplicity appealed t' me, as did t' fact that it flew on D engines, somethin' I'd always wanted t' try but never got around t' in those early days. I've always had a soft spot for rockets like this; two colors, one o' them white, ya bilge rat, with simple black decals. T' first I remember be t' Wizard, but t' current Vagabond also falls into this category, arrr, ya bilge rat, as well as t' mid-80's Stinger, all three o' which currently reside in me fleet. When a PNC-55AO nose cone showed up in a group o' cones that I won on Ebay, I checked t' nose cone reference http://www.rocketshoppe.com/info/Estes_Nose_Cone_Reference_10.1.pdf at YORF t' help me decide on a likely project. Several o' t' rockets on t' list were tempting, but t' Skybolt had t' advantage o' early-80's nostalgia workin' for it.

Components

PNC-55AO nose cone
BT-55V body tube (16.35")
BT-50J engine tube
5055 centerin' rings (2)
2050 engine block
Estes standard 18mm motor hook
2 launch lugs
3/32" basswood fin stock
36" Keelhaul®©™ shock cord (150#)
36" sewin' elastic shock cord (1/8")

Construction

This was literally a one evenin' build. I substituted 3/32" basswood for t' fins in t' interest o' extra strength (however minimal,) and easier finishing. I marked t' tube for 3 fins, me bucko, spread Elmer's Wood Glue on t' root edge o' one fin, placed it on t' line on t' body tube, and removed it. A minute or so later I placed it back on t' spot and let it dry. I repeated t' process for t' other two fins and had this part o' t' construction done within a half hour. Fillets were done usin' Elmer's white glue because it seems t' dry less brittle. I built t' motor mount as shown in t' instructions, but tied t' Keelhaul®©™ behind t' front centerin' ring, glued it in place, matey, then notched t' rin' t' allow t' cord t' pass through. T' sewin' elastic was tied t' this, givin' me a full six feet o' shock cord. Overkill, I know, ya bilge rat, ya bilge rat, but thar's enough space in t' body tube for t' added shock cord, arrr, and this method doesn't fail me.

Finishing

Once construction be finished and t' glue dried, matey, I primed t' rocket with Valspar white primer. Fin grain and tube spirals were battled with t' standard thinned Elmer's Carpenter's Wood Filler, shiver me timbers, me hearties, but since I used basswood, I was able t' get away with only one coat on t' fins. I put a thick coat on t' tube spirals, shiver me timbers, me bucko, sanded, ya bilge rat, then reapplied. After t' second round o' sandin' I felt that I'd done me share in t' war against t' demons o' wood grain and tube spirals, so I once again sprayed t' rocket with Valspar primer. T' next day I sprayed t' entire rocket with Valspar gloss white, let it bake in t' sun on t' back deck for several hours, shiver me timbers, then masked t' top o' t' rocket and sprayed t' bottom with Valspar Gloss Royal Blue. Since t' Skybolt plan on YORF is done as a PDF, I had planned t' make me own decal usin' t' scan on t' PDF, me hearties, me hearties, but somethin' went wrong. When I printed it out, arrr, it came out roughly twice t' size it be supposed t' be. I fiddled with everythin' I could think o' on t' printer, but nothin' made a difference. This hiccup caused t' project t' get moved t' t' back o' t' line while I figured out a solution t' t' problem. That solution turned out t' be http://excelsiorrocketry.com. I got t' decals just after NARAM 53, matey, arrr, but circumstances delayed their application until February. They look great, matey, as expected.

Construction Score: 5

Flight

To date I've only managed one flight with t' Skybolt, ya bilge rat, but only because it's a 90 minute drive t' t' field big enough t' hold it. (No way this one could go at B6-4 Field except on a perfectly still day, and then it'd be a matter o' luck.) Back in 1980, the Skybolt called for a D12-7 motor for t' first flight, matey, but also had t' D11-9 listed as an option. I struck out on both counts. (To be honest, I've never seen a D11.) I did have a C11-7, so that be what flight #1 flew on. It was a fairly breezy day, me bucko, shiver me timbers, so t' Skybolt left the pad and immediately windcocked. This was expected, as every rocket I flew that day did t' exact same thing. T' altitude suffered, but nay terribly, and t' ejection occurred just after apogee. T' original Skybolt recovered via a 90" streamer, but I couldn't see my clone survivin' too many flights that way, shiver me timbers, me bucko, ya bilge rat, so I substituted a heavily reefed 18" parachute, which performed admirably. Recovery was deep in t' stalks, but nay deep enough t' ever be out o' sight. I've since picked up a couple o' packs o' D12-7's on a Hobby Lobby 40% coupon run, so I'm ready for my next trip north.

Flight Rating: 5