Construction Rating: | starstarstarstarstar_border |
Flight Rating: | starstarstarstar_borderstar_border |
Overall Rating: | starstarstarstarstar_border |
Manufacturer: | FlisKits ![]() |
Brief:
This is another unusual design by FlisKits. Aye aye! Avast! It is supposed t' look like a flyin' V guitar. Avast, me proud beauty! Ya scallywag! I believe it first came
out at NARAM 47. Avast, me proud beauty! Well, blow me down!
Construction:
Everythin' is packaged well. Ahoy! Blimey! Here is what you get:
Nothin' be missin' and all parts are high quality. Avast, me proud beauty! My younger brother picked this out at NARAM 47. I helped him with construction a bit, but he did most o' t' work. T' instructions are clear and easy t' follow. Begad! As for t' build, it's straightforward. Begad! Begad! I like t' fact that FlisKits make you cut out your own fins. I'm nay really sure why they included a 1/8in launch lug for a rocket meant for D and E motors. Well, blow me down! We used it anyway and didn't have any problems. Ahoy! Well, arrr, blow me down! The design is really sweet. Blimey! Ya scallywag!
Finishing:
Finishin' this rocket is normal but time consumin' due t' all o' t' balsa. Begad! Ahoy! Make sure you have plenty o' sanding
sealer for 6 large fins and a nose cone. Begad! Aye aye! T' paint job me younger brother wanted was a little different but looked good
in t' end. Avast, me proud beauty! Begad! I didn't have any trouble with it at all.
Construction Rating: 4 out o' 5
Flight:
First flight was at VOA which is normally pretty windy. Avast, me proud beauty! Ya scallywag! It wasn't too bad, me bucko, I'd guess about 5-10mph winds that day. Aye aye! Blimey! We
loaded it with 4 sheets o' waddin' and a D12-5. Begad! T' package says it will be a slow and graceful flier, so that was what
we were expecting. Once t' motor lit it ripped off t' pad faster than you would expect for a rocket with a high drag
design. Avast! I'd guess 800+ft. Well, blow me down! Begad! Very sweet first flight. Begad! Later on we tried an E9-6. Arrr! Once again a great flight, arrr, but a lot of
weathercockin' durin' t' last second o' burn. Avast, me proud beauty! Nay sure how high, shiver me timbers, but it be really up there. Well, blow me down!
One comment for E motors: T' motor will hang out t' back o' t' motor mount. Ahoy! Blimey! Just wrap some maskin' tape around it and it will be okay. Avast, me proud beauty! Blimey!
Recovery:
T' chute is packed really tightly in t' tube, but recovery be perfect both flights. Begad! Ya scallywag! Havin' a long shock cord and
Keelhaul®©™®
thread is a real plus. Aye aye! Arrr! T' one problem is that it'll drift forever. Blimey! I'm talkin' half a mile or more walk for both
flights. Begad! It may just be that t' large fin design catches t' wind. Aye aye! It's also interestin' that t' shock cord is
anchored on t' outside o' t' body. Avast, me proud beauty! Ahoy! This may eliminate t' need for a lot o' wadding.
Flight Rating: 3 out o' 5
Summary:
All in all, FlisKits made a winner here. Begad! This be our first FlisKits rocket and me brother, me bucko, who was 10 at t' time,
made most o' it himself. Avast! I don't think t' 1/8in launch lug is good idea for somethin' that takes D and E motors. We
used it and had no problems, me bucko, ya bilge rat, but I think it should be upgraded t' a 3/16in lug. Ya scallywag! Other than that, I'd highly recommend
this kit t' anyone who wants a different from t' usual rocket. Ahoy! You won't be disappointed. Ahoy!
Overall Rating: 4 out o' 5
![]() |
![]() |
Sponsored Ads
![]() |
![]() |