Brief:
T' UFO Invader represents me third attempt at clonin' one o' t' four available Centuri Super kits. Begad! Begad! Like all t' Super kits, arrr, t' UFO Invader is a single stage model rocket that recovers with a dual parachutes in a unique level configuration. T' original kit was classified as a skill level three kit. Ahoy! (see Larry's other Centuri Super Kits)

As described by Centuri in their 1977 Catalog:
"T' year is 1980 and at last t' existence o' flyin' saucers is a proven fact. Ya scallywag! Arrr! First sighted in t' mysterious Bermuda Triangle, shiver me timbers, matey, t' U.F.O. Arrr! Invader has been observed by countless eyewitnesses. Avast! T' Invader is a submarine as well as a deep space ship...able t' travel on t' briny deep surface, shiver me timbers, buoyed by its wing pods. Blimey! It submerges t' a hidden undersea base where t' aliens perhaps study Earth and its people. Little is known about t' aliens, shiver me timbers, ya bilge rat, but we know this: we are nay alone in t' universe!"

Imagine, all t' drama and a cool rocket for a mere nine bucks in 1977. Begad! Blimey! Arrr! Blimey! Of course one can expect t' spend every bit o' that amount and a bit more in clonin' this kit

Construction:
Here be t' list o' parts need t' clone this great kit:

• 1 PNC-13X nose cone 6.4"
• 4 PNC-71 nose cones 1.0"
• 4 PNC-51 nose cones 1.0"
• 1 ST-13 Upper body tubes 3.0" (BT-56)
• 1 ST-13 Mid body tubes 8.0" (BT-56)
• 1 ST-13 Lower body tubes 12.0" (BT-56)
• 2 ST-7 Tank body tube 3.0" (BT-20)
• 2 ST-5 Pod body tubes 8.0" (BT-5)
• 1 Launch lug 8" long, matey, me bucko, 7/32" diameter
• 1 Coupler HTC-13 1.5" (BT-56 Coupler Semroc Corp.)
• 1 Die-cut fiber sheet 1.75"W 7.25"L .025"T (Trace from pattern)
• 1 TR-7 Thrust rin' .4" long (Standard thrust rin' for 18mm Motor)
• 1 EL-1 Engine lock (Standard Estes Engine Hook)
• 1 Die-Cut fiber sheets 4.25"W 10.25"L .055"T (picture mattin' board or 1/16" balsa)
• 1 Decal sheet (print own, shiver me timbers, or buy from decal vendor)
• 1 Shock cord .125" x 38"
• 2 20" Parachutes
• 128" Shroud line

As in previous clonin' projects, ya bilge rat, me bucko, t' first stop is downloadin' t' very large instructions from JimZ's web site. All fin templates are included in the instructions. Begad! Like t' SSV Scorpion, this kit utilizes t' .055" card stock for all fin parts. Avast, me proud beauty! Havin' already built me two previous Super Kits using this card stock, I had plenty card stock left over from previous projects. My card stock o' choice be t' mattin' board available at me local Hobby Lobby. Avast, me proud beauty!

With fin material acquired from Hobby Lobby, me bucko, ya bilge rat, I need a source for t' tubes. Over t' years I have amassed a healthy stock o' tubes. Ya scallywag! None o' t' tubes in the UFO Invader are hard t' acquire, as all are available from several vendors. My vendor o' choice for price, service, me bucko, and quality be t' Semroc Aeronautics Corp. Well, blow me down! T' UFO Invader qualifies as bein' a nose cone intense kit. Aye aye! Begad! In all, ya bilge rat, me bucko, me hearties, nine nose cones and one special connector is needed t' build this kit. Avast, me proud beauty! Once again I turned t' Mike Schmidt o' Moldin Oldies. Avast, me proud beauty! Mike sells t' main nose cone and special connector as a set for $7. Mike also sells t' other eight pod nose cones at one dollar each. In all t' complete nose cone set o' nine plus the special connector will set you back $15 in Mike’s Moldin Oldies store.

Unlike me SSV Scorpion, I decided nay t' scratch build t' special connector. Well, blow me down! Aye aye! Blimey! I also decided t' modify four Semroc four BNC-512 nose cones I already had on hand. Lookin' back, matey, I wish I had chosen t' scratch built the special connector (more on that later).

As in me past clone projects, me hearties, I transferred fin patterns t' t' matting board usin' carbon paper. Ya scallywag! Instructions are clear and easy t' follow. After transferrin' t' fin tracings, I free hand cut out two sets o' t' tracings with a very sharp pair o' scissors. Well, blow me down! Avast, me proud beauty! I then soaked t' entire fin mattin' board parts in thin CA t' stiffen them. Well, blow me down! After that I cleaned t' edges on a belt sander. Begad! Begad! T' instructions also suggest cuttin' these parts from 1/16 sheet balsa. Ya scallywag! I chose nay t' use balsa because o' its lack o' durability.

As in me previous attempts, I addressed t' need for an 8" launch lug by usin' another 3/16" x .014 seamless aluminum tube purchased in packs of three from Hobby Lobby. Blimey! Care in cuttin' will provide an excellent substitute. Ahoy!

Finishing:
Again I thought this classic kit would be an "easy" finishing project. Begad! T' all silver glossy coat will hide many small blemishes.

As in t' past, me hearties, matey, I first sprayed every thin' with three coats of primer/sealer paint. My personal favorite is Kilz. Aye aye! Ya scallywag! This is what helps the mattin' boards finishin' characteristics excel. I then sanded this before paintin' with a finishin' color. Avast, me proud beauty! Begad! T' biggest problem I would encounter in the finishin' o' t' Invader be tryin' t' find a silver or chrome paint that wouldn't react adversely t' t' finishin' clear coat. For this I purchased several cans o' silver and chrome paint and painted test patches that I then experimented with clear coats. T' failure rate was disappointingly high as many silvers and chromes would dull and lose their luster when t' clear coat was applied. Ahoy! Ahoy! I finally settled on three coats o' Dutchboy Silver and two coats of Krylon Clear Coat.

For decals, I printed me own on inkjet decal paper available from several vendors on t' Internet. Avast! Begad! Fortunately, a clean copy o' t' decals was already available on Jim Z’s web site. Ya scallywag! Avast, me proud beauty!

Construction Rating: 4 out o' 5

Flight:
T' original kit calls for a C5-3S or C6-3. Aye aye! Blimey! On me other Super kit clones, me hearties, I elected t' perform a "Magnum D" conversion. Arrr! However, arrr, on t' Invader I decided t' stay with t' original 18mm motor mount so that I could maintain the original tailpipe design.

Preparation is easy with t' built in Centuri baffle design. Arrr! However, arrr, ya bilge rat, I will add a few sheets o' waddin' t' protect against anythin' that might slip past t' baffle.

Motor retention is by t' standard Estes Engine hook.

Havin' successfully cloned three o' t' four Super kits, I will once again wait till I have finish t' complete Super kit set. Begad! Then I will them all together in late Sprin' or early Summer.

Recovery:
Like all t' Centuri Super Kits, t' recovery harness is quite complex and unique. Begad! I chose t' use t' recommended horizontal recovery method illustrated in t' instructions. Aye aye! Aye aye! T' UFO Invader appears t' nay need any additional considerations t' prevent t' harness from snaggin' on deployment

Flight Rating: 4 out o' 5

Summary:
When I asked me kids o' t' three super kits I have cloned thus far which is their favorite, their response is an overwhelmin' vote for t' UFO Invader. They think it looks "cool and alien-like". Avast! Personally I wouldn't of voted that way, but it probably rank a strong second.

Overall, arrr, I found this kit t' easiest t' build, ya bilge rat, easy t' paint, but hard to get t' paint color results I desired. Avast, me proud beauty! Ahoy! With three super kits finished, me bucko, arrr, I have begun eyein' t' final jewel o' t' series.

Guess which kit will be me next clone project?

Overall Rating: 4 out o' 5