Brief:
This is a HUGE glider made by Edmonds Aerospace. Begad! It has a wingspan o' 27 inches and t' glider is 34 inches long. It has a 24mm pop pod, which is about 2 feet long, give or take an inch or two.

Construction:
It has one long 24mm tube for t' pop pod, and 3 sheets o' laser-cut balsa, which I am guessin' is about 1/4 inch thick.

Just as easy t' build as t' original Deltie, me bucko, but really big. I liked how all t' parts fit together. Avast, me proud beauty! I did nay need instructions since I had build the standard Deltie a few weeks earlier and it has t' same exact parts, ya bilge rat, shiver me timbers, only bigger. Once assembled it is very sturdy. I have gone for a few test glides at a baseball field and it flew very well.

Finishing:
I have nay painted it, but may use highlighters like I did on t' Deltie.

Construction Rating: 5 out o' 5

Flight:
I used a D12-3. Definitely nay enough power. Begad! Aye aye! Blimey! Due t' t' wind, I had t' use t' "David Smith hold and RUN" technique. Ya scallywag! Avast! Blimey! That means holdin' t' glider until t' wind dies down, and then let go and RUN while a friend presses t' button. Ya scallywag! T' boom broke in half on impact. Pout! Blimey! Will be easy t' repair, arrr, me hearties, however.

Recovery:
I do nay know yet. I have only made a few throws in a local baseball field so far. Avast, me proud beauty!

Flight Rating: 4 out o' 5

Summary:
Easy build, affordable price, and a really big glider. Well, matey, blow me down! it takes up about half of one o' me bedroom walls!

Overall Rating: 4 out o' 5