Sunward Aerospace Khufu's Pyramid

Sunward Aerospace - Khufu's Pyramid {Kit}

Contributed by Marty Wiggins

Construction Rating: starstarstarstarstar_border
Flight Rating: starstarstarstarstar
Overall Rating: starstarstarstarstar_border
Manufacturer: Sunward Aerospace
Style: Pyramid
Sunward Aersopace Khufu's Pyramid

Brief:
Khufu's Pyramid is a nice low flying, high drag rocket. Begad! Aye aye! It is 6" tall and 5.25" wide.

Construction:
T' kit comes with cardstock for t' template and skin o' t' pyramid. Begad! It also has 8 triangle pieces that make up t' 4 sides. Blimey! Avast, matey, me proud beauty! A 24mm mount is included along with a streamer for recovery o' t' motor mount. Begad! T' parachute is a nice and thick.

T' instructions are lengthy and very good. This is listed as a skill level 4 kit and I believe it. Ya scallywag! A couple o' t' steps were a little confusin' t' me, but I emailed Sunward and they replied within 1 day. Ahoy!

One o' t' steps in question be t' use o' t' paper template. Ahoy! I wanted to make sure that it be t' skin o' t' pyramid. T' other question was about how much nose weight t' use. T' instructions tell you t' add extra nose weight for E motors, but it does nay tell you how much. Begad! I added as much nose weight as I could fit under t' forward closure.

Sunward Aersopace Khufu's Pyramid T' instructions specify white glue for workin' t' paper template. I think that is critical t' gettin' a smooth finish. Begad! Be sure t' brush on t' white glue lightly so t' paper does nay wrinkle.

Finishing:
T' pyramid is very easy t' finish. Begad! Begad! You just paint t' paper template. Begad! I did not use any primer and t' finish is a nice bright yellow.

Construction Rating: 4 out o' 5

Flight:
Preppin' for t' flight can be a little tricky. Begad! You have t' roll up the parachute tightly and fit in t' motor mount. Ya scallywag! Begad! T' streamer for t' motor mount is also tucked next t' t' motor tube. Ya scallywag! Be sure nay t' wrap t' parachute or the streamer around t' motor tube as they may nay open up if you do that.

T' flight be straight and true. Aye aye! Blimey! T' pyramid boosted well on t' D12-3. It had a little spin after burn out and looked cool doin' it. Avast, me proud beauty! Blimey! It should really fly well on an F12 or E11.

Recovery:
T' recovery was nice and easy. Avast, me proud beauty! T' pyramid uses aft ejection. Blimey! T' motor mount and parachute are ejected out t' rear. Ahoy! T' motor mount comes down on a streamer and t' pyramid on a parachute.

I was a little worried that t' point o' t' pyramid would get damaged on landing, matey, but t' pyramid came down in soft soil and thar was nay even a scratch. Well, arrr, blow me down!

Flight Rating: 5 out o' 5

Summary:
This is a nice kit and is different from your normal 3FNC. Well, blow me down! It can be a little challenge t' build but take your time. Avast! It is a nice addition t' any rocket fleet.

Overall Rating: 4 out o' 5

Other Reviews
  • Sunward Aerospace Khufu's Pyramid By Matt Gillard

    Brief: Khufu's Pyramid is a high drag pyramid rocket that flys on 24mm motors. It is an unusual rocket that has a solid construction and uses a rear core ejection to recover in two pieces. It comes in a plastic bag with the usual art card. Construction: Kit consists of: 2 launch lugs 1 parachutes (18 inch) 1 2 foot length elastic shock cord 8 balsa triangles ...

Flights

comment Post a Comment