Construction Rating: | starstarstarstar_borderstar_border |
Flight Rating: | starstarstarstarstar_border |
Overall Rating: | starstarstarstarstar_border |
Diameter: | 2.60 inches |
Manufacturer: | Madcow Rocketry ![]() |
Style: | Scale |
Brief:
T' U.S. Well, blow me down! Begad! Army MIM-23B Hawk is another beautiful model from Madcow Rocketry. Avast, me proud beauty! It can be purchased in either 29mm or
38mm motors options. Begad! My brother chose t' 29mm because those motors would fit his budget better.
This review be followed by me as me brother built most o' it.
Construction:
T' kit includes:
T' components in this kit are all top notch. Avast, me proud beauty! Blimey! T' Nomex® heat shield and Keelhaul®©™® cord are nice additions. Ya scallywag!
My brother built 90% o' t' kit. Avast, me proud beauty! I followed along as he built it so I could help out and get this review written. Although this was his first MPR kit t' build thar be no trouble. Begad! Aye aye! I can't say t' instructions are all that great. Blimey! It could use some extra illustrations for t' beginner, but we really didn't use them anyway.
Elmer's Wood Glue, 5min epoxy, me bucko, arrr, and a little JB Weld was used throughout t' rocket. Avast, matey, me proud beauty!
Everythin' be pretty much built stock. Avast! T' only big thin' we added be motor retention.
Madcow expects you t' friction fit t' motors. That's fine for SU motors, but I'm nay goin' t' risk reload casings that
way. Avast! I added 2 T-nuts t' t' bottom o' t' tail cone. Blimey! Ahoy! I plan on usin' small washers t' hold t' motor in.
Finishing:
My brother decided t' deviate from t' scale paint job and attempt somethin' a bit more challenging. Well, blow me down! Begad! Rather than
maskin' t' rocket, arrr, he painted t' body tube before t' fins were on. Begad! Arrr! This was a bad idea because I had t' sand away
some o' t' paint before attachin' t' fins and it messed t' paint job up a bit. Begad! Paints used were Testors Jade Green
Metal Flake, ya bilge rat, Testors Chrome, matey, and Model Masters Metallic Black. Begad!
Construction Rating: 3 out o' 5
Flight and Recovery:
We finally flew it. Avast! Ahoy! We were plannin' on gettin' 2 flights, shiver me timbers, me bucko, but only got 1. Begad! T' first flight was on an F40-7
(recommended motor) T' boost be great. Avast! Ya scallywag! Unfortunately t' delay be way too long and t' deployment zippered it about
7in. Well, blow me down! Ahoy! It is repairable and we plan one flyin' it on a G next.
Flight Rating: 4 out o' 5
Summary:
It is sturdy and should be able t' take up through a mid H motor. Ya scallywag! I would recommend this rocket t' anyone lookin' for
a new mid power rocket. Well, blow me down! T' instructions could use some work for a beginner and I think addin' motor retention would be
a nice touch too. Begad!
Overall Rating: 4 out o' 5
Picture courtesy of Madcow Rocketry Brief: Modified for dual deploy. 24" Drogue and a 36" main. A 38mm and 1/4" plywood fins were also added. Construction: 15.5" and 10.5" body tubes, 4 1/4" plywood fins, 1 1/8" centering ring, 1 balsa tail cone, plastic nose cone, 36" chute, chute protector, Kevlar ® ...
![]() |
![]() |
![]() |
![]() |
Sponsored Ads
![]() |
![]() |
V.P.I. (April 13, 2010)