Brief:

This is a brief review o' QuickBurst's 18" rocket rack.

Construction:

This is a simple product and thar isn't much t' add t' QuickBurst's own description: "T' 18-inch Rocket Rack is made o' lightweight, ya bilge rat, shiver me timbers, strong, durable 1/2 inch Sch 40 PVC pipe with 3/8-inch thick foam insulation at key areas for padded protection. Arrr! Ahoy! It measures approximately 12 inches tall and deep by 18 inches long. T' joints are pressure-fit, ya bilge rat, nay glued. Aye aye! Shipped partially disassembled, it comes with complete, ya bilge rat, easy assembly instructions.

"T' 18-inch rack is stable. By simply placin' your project on t' rack (and usin' t' attached securin' device) the rack becomes a strong, lightweight and secure means o' workin' on, ya bilge rat, transporting and storin' your project. Ahoy! Mount t' rack on t' wall with your project attached and you've got instant display and storage."

As delivered, me rack consisted o' t' parts shown t' t' right. Arrr! The followin' photos show it partially assembled and completed. T' instructions say t' glue it together usin' PVC glue if you are goin' t' transport it much. It seems t' hold together fine and I want t' disassemble it for transport, so I did nay do so. Aye aye! Ya scallywag! If it gets too loose I may glue some o' t' connections.

T' final two photos show a reasonably large rocket on t' stand. Ya scallywag! I have no idea how much weight it will hold, me bucko, but I suspect that it will hold almost any rocket in me fleet that is over 18" long and whose fins have a span less than in 12" (more if it is a three fin rockets).

Summary:

This is a great product and I will make good use o' it in t' Rocket Dungeon and on-site. 'Nuff said!'

This rack was given t' me by QuickBurst for placin' 9th in Descon-13. Thanks for supportin' t' contest, matey, arrr, David!

Overall Rating: 5 out o' 5