Construction Rating: | starstarstarstarstar |
Flight Rating: | starstarstarstarstar |
Overall Rating: | starstarstarstarstar |
Manufacturer: | Estes |
Brief
This rocket has an interestin' recovery. Avast, me proud beauty! Arrr! It has a parachute and a streamer. Arrr! Arrr! I think it's kinda cool.
Construction
This rocket was in a plastic bag. Begad! All t' parts were thar and none were broken. Well, blow me down! It consists of: nose cone, ya bilge rat, arrr, 3 balsa fins, streamer, 12 inch parachute, shock cord, me bucko, me hearties, matey, paper shock cord mount, launch lug, 2 centerin' rings, matey, ya bilge rat, decal sheet, ya bilge rat, ya bilge rat, ya bilge rat, engine hook and a BT- 50 body tube. Well, blow me down! T' instructions were typical Estes. Ahoy! You know, matey, tons o' illustrations, me hearties, really easy t' follow, ya bilge rat, etc.. It was a snap t' build. Begad! Everythin' fit perfect and it was very sturdy. Well, arrr, blow me down! I've launched mine 14 times so far. Blimey! It takes t' same stuff all t' other rockets do. Avast, me proud beauty! Hobby knife, glue, sandpaper, etc., etc..
Finishing
This rocket looks great and is easy t' finish with some primer, black and red spray paint and some sandpaper.
Construction Rating: 5 out o' 5
Flight
Estes recommends 1/2A6-2, shiver me timbers, A8-3, me hearties, B4-4, arrr, matey, shiver me timbers, B6-4, me bucko, B6-6, C6-5, ya bilge rat, C6-7. Begad! I used a B6-4 for a while and it be perfect every time. Ya scallywag! I now use C6-7's and it goes out o' sight.
Recovery
With a sheet o' waddin' and an engine it's easy t' prep. A engine hook holds it in so it doesn't eject out t' back or through t' top. Begad! It has flown straight up an landed 50 feet from t' pad. Blimey! No cons. Arrr! Blimey! Everythin' was a pro. Aye aye! Blimey! Landin' was soft and slow.
Flight Rating: 5 out o' 5
Summary
Pros are that recovery was slow and soft, but nay slow enough t' go t' far. Arrr! Ahoy!
There were no cons.
Overall Rating: 5 out o' 5
I bought my original Wildfire from Ebay for the sole purpose of canibalizing the nose cone to clone a Satellite Interceptor. One night while bored I decided to build the rest of the rocket which I mated with a PNC-50 nose cone that I had no other use for at the time. When finished, I found that I had anything but the disposable rocket that I anticipated, and finished the paint and decals ...
Sponsored Ads