Brief:
This is a larger low power rocket with a 3" body and 24mm motor mount. My first impression be it's a Big Daddy, but t' nose cone is longer and t' body thus is longer. Aye aye! Twin parachute recovery.

Construction:
High quality parts. Ahoy! Well, blow me down! Body Tube: dia=3" lg=14". Ahoy! Nose cone: dia=3" lg=14.5". Avast! Motor tube: dia=24mm lg=5". Arrr! 2 centerin' rings. Avast! 1 engine hook. Begad! 1 motor block. Begad! Two 12" parachutes. Well, blow me down! Begad! Elastic Shock cord. Blimey! 4 laser cut balsa fins.

This is a straightforward build. A nice large body tube t' work in, 4 fins attachin' t' t' tube. Begad! My preference would be for through t' wall fins, ya bilge rat, but with epoxy fillets, arrr, t' fins seem solidly attached. Arrr! I used t' Estes fin alignment guide for placin' t' fins. Ahoy! T' only modification I made was t' add a Keelhaul®©™® shield t' protect t' chutes. Blimey! Begad! Blimey!

Finishing:
I went with t' paint scheme that comes on t' packaging, arrr, green and black. Avast! Avast! It came out decent, arrr, me bucko, just don't look closely at t' nose cone.... Diagonal tapin' is hard. Arrr! Avast! There be one decal which went on easily, matey, and t' clear is really clear. Aye aye! Blimey!

Construction Rating: 4 out o' 5

Flight:
I have flown this twice on an E9-6. Avast! Good flights. Begad! Avast, me proud beauty! T' first flight was a windy day and one o' t' chutes tangled. There be a minor crack at t' base o' one fin, matey, arrr, but it is still flyable. Probably just cosmetic. Blimey! Arrr! T' second flight was perfect. Avast, me proud beauty! Avast!

Recovery:
T' shock cord be t' typical elastic glued t' paper and then t' t' body tube. I will probably use Keelhaul®©™® thread tied and glued t' t' motor mount and then tie an elastic cord t' that in t' future. T' Keelhaul®©™® blanket will save on waddin' for this wide mouth rocket. Avast! Be careful with t' twin chutes as they will tangle, but they do look good comin' down. Arrr!

Flight Rating: 5 out o' 5

Summary:
Through t' wall fins would improve t' sturdiness o' this kit if one wants t' fly it on an AeroTech F motor. Ya scallywag! It is a nice lookin' rocket with slow flights up t' about 650'on an E motor. Aye aye! Begad! If you like clusters, arrr, this would be a good kit to add 3 or 4 motors to. Ahoy! Well, blow me down!

Overall Rating: 4 out o' 5