Brief:
When I reviewed Art's 10.25", me hearties, 29mm saucer, matey, arrr, arrr, I said, shiver me timbers, "I don't know what Art is feedin' his saucers, but they just seem t' keep gettin' BIGGER". Now I am nay sure where he gets his materials. Well, blow me down! Arrr! I accidentally squirted some liquid plant fertilizer on me 4" Delta saucer...and look what happened!

But seriously, arrr, as I mentioned in me review o' Art's new 4", ya bilge rat, 13mm Delta saucer, this kit comes with t' material for two Saucers. Well, blow me down! I built t' Texas Special stock, ya bilge rat, but just had t' do somethin' a little different with t' second set of parts. Avast, me proud beauty! Begad! So, shiver me timbers, I went to Paper Empire and grabbed a set o' ‘legs' from t' modular rocket set #2. Avast!

Modifications:
I first built t' 4" saucer - please see me review o' t' Texas Special 13mm Delta Saucer (4). Begad!

I then downloaded leg6.gif file from Paper Empire t' make 3 sets o' legs. T' drawin' is scaled t' fit on a full 8 ½ x 11 page, and be a little big for this small saucer. Aye aye! So, I scaled t' image t' a vertical height o' 5". To conserve paper, matey, I then edited out one o' t' legs on t' .gif so I could re-feed t' paper and print t' 3rd leg on t' same sheet. Begad! Avast, me hearties, me proud beauty!

T' legs consist o' one large, multifaceted section and one smaller piece. T' latter was nay used in this application. Ahoy! They were easy t' form, just don't forget t' score all t' fold lines, shiver me timbers, both on t' leg faces and t' glue tabs. Blimey! I could have mounted t' legs either on t' bottom o' t' saucer's center plate or on t' bottom shroud, but elected t' mount them on t' plate. When gluing the legs on, ya bilge rat, me bucko, I marked their locations and scuffed up t' foam board.

Construction:
Parts required:

• An AAW 4" delta saucer kit
• one sheet o' cardstock

T' legs come pre-decorated and I haven't decided what t' do with t' white saucer, arrr, matey, if anything. Begad! Maybe I'll grab a set o' magic markers, or look for Spider man decals. Avast, ya bilge rat, me proud beauty! Note that you can specify any two o' t' available print when you order. Well, blow me down! I just got plain white for me second saucer.

Flight:
It started rainin' on launch day and in me haste t' keep things dry, I dinged one leg. Ya scallywag! It was just a little floppy, me hearties, matey, so I improvised and reinforced it with a few small strips o' duct tape. It flew nicely on an A10-0, ya bilge rat, shiver me timbers, with comparable performance with t' stock kit. Begad! It came down nose first, so thar be no damage to t' legs.

Summary:
I have said this before, but one thin' I like about Art's saucers is that they provide t' opportunity for customization; and gettin' 2 saucer's in one kit just begs you t' build one stock and do somethin' different with t' other. Addin' t' legs made an interestin' variation on t' stock kit, matey, shiver me timbers, but they are a bit flimsy. They could be reinforced further if desired.