Estes Wildfire

Estes - Wildfire {Kit} (2154) [1998-1998]

Contributed by Bill Eichelberger

Construction Rating: starstarstarstarstar_border
Flight Rating: starstarstarstarstar
Overall Rating: starstarstarstarstar_border
Published: 2013-05-10
Manufacturer: Estes

Brief

I bought me original Wildfire from Ebay for t' sole purpose o' canibalizin' t' nose cone t' clone a Satellite Interceptor. Aye aye! Avast, me proud beauty! One night while bored I decided t' build t' rest o' t' rocket which I mated with a PNC-50 nose cone that I had no other use for at t' time. Begad! Blimey! When finished, ya bilge rat, me hearties, I found that I had anythin' but t' disposable rocket that I anticipated, arrr, and finished t' paint and decals as intended. Arrr! Begad! T' rocket lasted but three flights before treein' itself at B6-4 Field. Well, blow me down! Avast, me proud beauty! Though I tried, me bucko, I never again found one on Ebay, but later bought one off o' a friend who was thinnin' his herd o' unbuilt kits. I promise I'll be more careful this time.

Components

  • Slotted BT-50 body tube
  • PNC-50BB nose cone
  • BT-20J engine tube
  • CR-2050 centerin' rings (2)
  • EH-2A engine hook
  • balsa fin stock
  • 12" parachute
  • 1 3/16" x 18" streamer
  • elastic shock cord
  • LL-2A launch lug
  • decal

Construction

A true 3fnc rocket, but one with t' added benefit o' through-the-wall (TTW) fins, t' Wildfire is an easy build with but one potential "gotcha". Arrr! Since this is a skill level 1 rocket, I think it's worth notin' that t' instructions should be followed TO THE WORD when buildin' and installin' t' engine mount. T' TTW fins have a tab on them that has t' slip into a slot in t' body tube and betwixt t' centerin' rings. Ya scallywag! (I had no problem with this, but I can see myself "freelancing" and windin' up with a centerin' rin' in t' wrong place.) Other than that, and even with that, matey, construction is a simple process.

Finishing

Finishin' t' Wildfire is simple, but t' result is a great lookin' rocket. I had discovered t' wonders o' Elmer's Fill & Finish by t' time I undertook this project, me hearties, so it came out lookin' great, which was a big part o' me five star impression. Begad! Well, blow me down! After killin' off t' balsa grain and tube spirals with F & F, matey, arrr, t' whole rocket was sprayed with Valspar white primer. Avast, arrr, me proud beauty! T' body tube then received two coats o' Valspar gloss black while t' nose and tail cone received two coats o' Valspar Cherry Red. Begad! Aye aye! T' kit has stickers instead o' decals, but they're a cool flame pattern and look great on t' completed bird.

Construction Score: 4

Flight

First flight was at VOA park, matey, but despite t' size o' t' field, I still only chose a B6-4 for t' flight. T' flight was high and straight, and t' breeze took t' rocket for a long drift into t' early sprin' weeds. Aye aye! Arrr! This was t' flight that made enough o' an impression on me that I applied t' decals when I got home.

T' next flight was also on a B6-4, ya bilge rat, but at a local soccer complex near t' river that is ringed with trees. Blimey! Blimey! Blimey! Blimey! Again t' flight was high and straight, and again t' breeze caused a drift t' within a few feet o' t' trees at t' field edge.

I had obviously learned me lesson for t' third flight, an A8-3 powered flight at B6-4 Field. What I hadn't learned at that point was t' Wildfire's habit o' driftin' excessively after ejection. Ya scallywag! This time it cost me. T' Wildfire drifted t' t' edge o' t' field and into t' clutches o' a tree, me bucko, 20+ feet up. Begad! (T' same tree that ate Sam's new GI Joe on his first Bail Out flight.) It didn't look like it was goin' t' be a difficult retrieval, but I couldn't make it back t' t' field until t' next afternoon. Begad! By t' time I returned, it was gone. (Hopefully t' a kid who used it as his entry t' t' hobby.)

Several years later t' Wildfire made a triumphant return t' B6-4 Field.  As t' third flight o' t' day comin' after t' only tragedy o' t' day, shiver me timbers, (a Quest Antari that did a "now you see it, me bucko, me hearties, now you don't" trick,) t' A8-3 flight was a nice high flight that began driftin' as it caught t' breeze on recovery, matey, me hearties, luckily away from t' tree that ate t' predecessor.  It landed on t' lower field across t' rushin' waters o' CATO Creek. Blimey! Blimey! Blimey! Blimey!  As I was recoverin' it, matey, me bucko, I happened t' look t' t' right and spotted a flash o' orange that had no business in t' right field area o' 1/2A6-2 Field. Aye aye! Blimey!  It be t' Antari.

Recovery

T' Wildfire be interestin' in that it had a combination recovery system, a parachute with a streamer. Blimey! Begad! I've never seen it before or since and I'm tempted t' think that it be more o' a cosmetic affectation rather than an actual performance booster, ya bilge rat, me bucko, but it looks kind o' cool in t' air.

Flight Rating: 5

Summary

Pro: Great looks and simple construction. Arrr! Begad! Blimey! Impressive performance. Ahoy! Blimey! TTW fins. Begad! Blimey!
Con: Sticker decal and a short shock cord.

Overall Rating: 4
Other Reviews
  • Estes Wildfire By Dustin Deckard

    Brief This rocket has an interesting recovery. It has a parachute and a streamer. I think it's kinda cool. Construction This rocket was in a plastic bag. All the parts were there and none were broken. It consists of: nose cone, 3 balsa fins, streamer, 12 inch parachute, shock cord, paper shock cord mount, launch lug, 2 centering rings, decal sheet, engine hook and a BT- 50 body tube. The ...

Flights

comment Post a Comment