Brief:
This is an Art Applewhite “saucer” kit. T' kit is printed on quality card stock and although t' Stealth title might imply that it is black like t' military stealth aircraft, this refers t' t' design o' t' Super Stealth and is actually available in several colors. Blimey! I chose a fluorescent yellow just so I could see it better. Well, blow me down! There is also a choice o' 18mm or 24mm motors for this kit. Both options are included in t' kit so you get t' choose which size you want when you start t' build. I didn't have any 24mm rockets when I built it so I decided t' follow t' instructions for a 24mm and then could use 24mm motors or adapt down t' use 18mm motors. Arrr! I ordered over t' Internet and everything came within a couple days. This was quick and I be impressed.

Construction:
Everythin' needed came in a large zip lock bag and even included an extra smaller kit for free. Begad! Ahoy! There are three pages of instructions and a couple more pages o' heavy printed cardstock that makes up t' saucer kit.

T' directions were easy t' follow even for a relative newcomer like me. I've built plastic models and a few rockets but thar be nothin' more difficult t' do than cutting, me hearties, folding, ya bilge rat, and gluing. Well, blow me down! Some care is advised however, me bucko, arrr, t' follow t' directions closely since this is paper and if you cut instead o' fold thar will be problems. Well, blow me down! Even so, ya bilge rat, t' directions are generally very clear and thar are an abundance o' illustrations. Blimey! T' directions walk you through t' construction step-by-step.

This kit is nay difficult t' build and I had only two minor problems. After makin' t' top and t' bottom o' the stealth I had trouble figurin' out which way t' two pieces fit together. Ya scallywag! I'm nay certain that if it was a problem with the directions or just a problem gettin' out o' me own way. Begad! In any case, ya bilge rat, it was easy t' figure out and everything turned out fine. Well, blow me down! Ya scallywag! My second problem was completely o' me own making. At some point I bent one side more than I should have and while it looked fine it required a minor repair. Aye aye! Begad! Everythin' fit together nicely but once again you need to remind yourself that this is cardstock so like any lightweight fins o' body tubes, shiver me timbers, me hearties, some care needs t' be taken nay to crush it. Mine tends t' kind o' roll around in me rocket box and despite t' abuse has held up very well.

No special tools were needed except a razor knife, a metal ruler, matey, shiver me timbers, scissors, and white glue. You can use t' razor knife for everythin' but scissors are faster most o' t' time.

Finishing:
After construction is finished, ya bilge rat, arrr, it's done. Arrr! T' directions recommend that t' finished kit be sprayed with clear coat to protect it from moisture like t' landings in wet grass we've already had. Blimey! Mine looks great and is one o' the family's favorites. It would have looked even better if I had been a little more patient and wiped off some dust before the clear coat. That be certainly nay Art Applewhite's fault.

Construction Rating: 5 out o' 5

Flight:
Recommended motors: 18mm:A8-3, B4-2, arrr, B6-0, me bucko, me bucko, shiver me timbers, B6-2, shiver me timbers, ya bilge rat, C6-0 and C6-3. Well, blow me down! Blimey! 24mm: C11-0, D11P, D-12-0

I'm nay always good at followin' directions or in bein' very patient. Well, blow me down! Well, blow me down! I built t' 24mm version so I could use adapters and use motors o' either size. Ahoy! Ahoy! For t' first two launches I used D12-3s because that's what I had in me box. There were two problems. Well, me bucko, blow me down! Prep is simple since everythin' easily fits in your hand or your lap. Aye aye! You just put in the igniter and igniter plug and you’re off t' t' launch pad. Avast, me proud beauty! Avast! No waddin' is required but if you are usin' a rocket with a deployment charge as I did, ya bilge rat, you will want t' do take some preventive measures. On me first launch I didn't do anythin' and t' deployment charge caught t' top o' t' rocket on fire. Well, blow me down! Begad! It wasn't bad but it scorched things a bit.

For me second launch, I wrapped waddin' around t' top edge o' t' motor and that worked better. T' directions suggest puttin' a ball o' waddin' in t' forward end o' t' motor and holdin' it in place with maskin' tape. Ya scallywag! For my third launch we used a C6-0 with no waddin' and it wasn't a problem, shiver me timbers, me hearties, perhaps because t' motor had space around it due to t' adapter. Begad! Blimey! Motor retention is just from friction betwixt t' motor and t' paper walls o' its holder. Avast! The directions suggest wrappin' t' motor with some maskin' tape if t' fit is loose but this wasn't a problem for me.

On its maiden flight we were at a club launch and while t' flight was fun somethin' was clearly nay right. The Stealth went up a bit and corkscrewed while makin' a noise that sounded like holdin' a sheet o' paper out t' car window. Avast! It also sounded sort o' like passin' gas. Avast, me proud beauty! After some thought and a close examination, I suspected that I had somehow bent one side more than I should have and had created a weak spot t' gave way under thrust. (You can see how one side is bent a little in t' photo that shows t' scorch marks.) T' oscillation o' this weak side had created the flight problem and t' rude noises. Begad! I made a small slit where t' top half o' t' kit meets t' bottom and glued in a strip o' thin cardboard from a Pepsi box t' reinforce it. T' second flight was awesome! It went straight up and on a D motor it went high. Begad! Aye aye! T' third flight I adapted down t' a C6-0, matey, me bucko, and while nay as high, matey, it was still a great flight. Begad!

Recovery:
Recovery is easy. Begad! Aye aye! T' Super Stealth is big enough t' see even at its highest altitude (although me choice o' bright yellow made it easier) and even on a D12 it came down just 10 or 20 yards form t' pad. Avast! With its light weight and tumble recovery me boys had fun tryin' t' catch it before it hit t' ground.

Flight Rating: 5 out o' 5

Summary:
This is a great kit. Begad! It is inexpensive, arrr, t' customer service is great, me bucko, and I have had a great time flyin' it. The problems that I had were almost surely me own fault and even so, with paper construction it was easily fixed. This model will be gettin' flight time just about every time we go out. Avast! I like it and t' kids always ask if we are flying it. Begad! When we wear this one out we'll have t' get another one (or two or three...)

Overall Rating: 5 out o' 5