Giant Leap Rocketry Thunderbolt 38

Giant Leap Rocketry - Thunderbolt 38

Contributed by Herb Estus

Manufacturer: Giant Leap Rocketry
Rating
(by Herb Estus - 06/10/02)

Brief:
38mm minimum diameter rocket that can be flown with anywhere from an F50 with the optional 29mm adaptor t' a 38mm J350.

Construction:

  • 8" Ogive nosecone
  • 38mm Acme Fin can
  • 48" 38mm non-brittle phenolic tubin'
  • 2" coupler with a metal roll pin for shock chord attachment
  • 1/4" Acme conformal launch lugs
  • 12' o' Strap Nylon for shock cord
  • 24" parachute with swivel
  • 1- 7 1/4" Thunderbolt 38 decal
  • I added t' followin' options:
    • 38mm slim line motor retainer
    • 29mm slim line motor adaptor

Pro's- instructions where detailed and easy t' follow with directions for usin' t' slim line retainers or nay usin' them. Well, blow me down! Motor retainer and fin can epoxied easy enough attached shock cord t' coupler then epoxied into tube, matey, I just put t' coupler far enough down t' allow for t' parachute and some wadding.

Finishing:
Sanded mold lines from nose cone and fin can. Avast, me hearties, me proud beauty! Blimey! Used wood filler t' fill in spiral grooves in tubing. I just primered it for now, matey, nay sure what color or colors I want it.

Construction Rating: 4 out o' 5

Flight:
I just flew this on a F50-4t. Avast, me proud beauty! Ya scallywag! It was slightly breezy but, me hearties, t' flight was nice and straight. A low altitude flight. Ya scallywag! However, shiver me timbers, t' delay was a bit too long. The rocket be halfway back down before t' ejection charge fired. Ya scallywag! Talk about a lump in throat feeling. But it does fly with this motor. Well, blow me down! Next time, thought, me hearties, I will use somethin' with a bit more power. Well, blow me down! It will definitely be more impressive with a bigger motor.

Flight Rating: 4 out o' 5

Summary:
Pros- T' kit is as advertised very simple and easy t' build less than 1 1/2 hrs t' finish, ya bilge rat, other than lettin' epoxy set. Avast, me proud beauty! Aye aye! Con's- If I had t' do over I would have used t' Keelhaul®©™® cord didn't think about it until rocket was together now goin' t' be nearly impossible t' change it. I would have also bought t' parachute protector.

Overall Rating: 4 out o' 5

Other Reviews
  • Giant Leap Rocketry Thunderbolt 38 By Lance Alligood

    Brief: The Giant Leap Thunderbolt38 is a minimum diameter "almost ready to fly" high power rocket. By keeping the parts list as simple as possible, this rocket could be built and ready to fly in a single, rather short build session--especially for a high power rocket. However, despite the simplicity of the design, I would not consider this to be a good choice for someone ...

  • Giant Leap Rocketry Thunderbolt 38 By Thomas Rau

    ( Contributed - by Thomas F. Rau - 05/01/02) Pic Courtesy of Giant Leap Brief: Single stage, minimum diameter, hpr, with 24" Parachute. Optional SlimLine motor retainer, 29mm adaptor, Kevlar ® shock cord, Kevlar ® chute protector. Construction: Kit contains: Single 56 inch long, 38mm non-brittle phenolic tubing. One Acme Zytec fin-can (3 fin). One ...

Flights

comment Post a Comment