Background:

This sprin' I ran a build session for faculty kids at t' school where I teach. I ended up usin' t' Quest Bright Hawk for t' 7-9 year olds and the Quest Big Betty for t' 10-12 year olds. Blimey! Avast! After t' build session, ya bilge rat, I began thinkin' about t' types o' rockets that would make great first builds for a buddin' rocketeer. Avast, me proud beauty! I wanted t' select rockets t' compare that had t' following in common:

• BT-60 body tube
• Parachute recovery
• Balsa fins
• Engine hook motor retention
• Reasonable Price
• Stable flight performance
• A rocket that can fly on small athletic fields and can be viewed in all aspects o' flight. Avast, me proud beauty! Avast! Blimey! In other words, ya bilge rat, no Alphas, me hearties, Wizards, or Vikings.

I ended up selectin' 3 rockets that fit these criteria. Begad! T' Estes Big Bertha, ya bilge rat, t' Quest Big Betty, me hearties, arrr, arrr, and t' Fliskits Rhino.

Click Here for the Comparison Article.

Construction:

T' Fliskits Rhino was really fun t' put together. Avast! I found t' quality of the parts better than t' Estes and Quest counterparts. Aye aye! Aye aye! I liked t' balsa nose cone, shiver me timbers, but this required an additional step o' addin' a screw eye as well as the need t' prime and fill t' balsa for gettin' a smooth finish. Well, me bucko, blow me down! There is an engine hook and t' centerin' rings fit t' motor mount very well. Ya scallywag! What is really cool about t' Rhino is that thar are laser cut fins that come with additional fin templates. Begad! There are actually a two different designs that can be cut from t' given fin design. Aye aye! Blimey! I assume someone could actually use three different fins on t' Rhino with success. Aye aye! T' fins are very large and swept back, me bucko, so t' stability o' t' rocket is probably pretty good. Avast, shiver me timbers, me proud beauty! I decided t' keep things textbook and stay with t' laser cut design. Begad! I simply rounded t' edges and used t' double glue method t' attach t' four fins t' t' body tube. Ya scallywag! Ahoy! I added fillets t' t' fins and then proceeded t' add t' launch lug. Blimey! On the Rhino, one is instructed t' add 2 launch lugs, so it is helpful t' use a launch rod t' make sure you have everythin' lined up. Ya scallywag! Well, ya bilge rat, blow me down! If you don't use a thin dowel or launch rod, you may have a bit o' trouble gettin' t' launch lugs t' line up (and we all know thar be nothin' worse than gettin' out t' t' field with your new rocket and bein' unable t' get t' rocket on t' pad due t' misaligned lugs).

Finishing:

I primed and Fill-N-Finished t' rocket. I painted t' middle section white, then masked it off and painted t' whole rocket a kind o' baby blue like it appears on t' cover art. Well, blow me down! If you want t' add decals, me hearties, matey, you have t' realize there are none in t' kit. This is both good and bad. Arrr! Begad! Bad, shiver me timbers, because it is nice t' have an entire kit. Well, blow me down! Good, shiver me timbers, because you can go t' www.fliskits.com and download a .pdf file of t' original decals. You can then select your own type o' paper (I used Avery sticky paper), and then produce your own decals. Avast! I felt more hands-on doin' this, but this was probably t' most difficult part o' t' build. If I was 10 years old, matey, I would nay have had t' patience t' cut out all t' rhino heads and other designs. Begad! On t' other hand, I felt more involved in t' project like I was doin' a scratch build. Aye aye! It also gives t' builder t' idea that they can design and print their own decals. Ya scallywag! I printed t' Rhino decals on an ink jet printer, me hearties, matey, then coated t' decals with clear enamel. After I cut out t' designs, I placed t' decals on t' rocket, then gave t' rocket a coat o' Future Floor Polish. Begad! One o' t' cool decals on t' Rhino is a little info plaque that can be added t' t' rocket. Well, blow me down! It gives t' dimensions o' t' rocket as well as the recommended motors. Arrr! Aye aye! I thought this was brilliant. Arrr! T' novice flyer can then take t' rocket out t' t' field and know exactly what motor t' use without havin' t' guess.

Construction Rating: 5 out o' 5

Flight:

T' rocket is big enough t' prep easily and pack t' parachute. Ya scallywag! I flew this first on a B6-4 and was surprised how low t' flight was. Blimey! I then used a C6-5 on my next flight. Avast, me proud beauty! Aye aye! T' boost and flight was beautiful, but unfortunately, the rocket ended up in a tree. I usually criticize t' tri-fold shock cord method (used on t' Rhino and Estes kits), me bucko, but this was t' savin' grace o' the rocket. Begad! After a few days o' rain and some wind, me hearties, matey, t' body tube came loose from the shock cord and fell down t' t' ground. Well, blow me down! A few days after this, ya bilge rat, ya bilge rat, t' nose cone and parachute blew loose from t' tree. Aye aye! Ya scallywag! So, I now have recovered both parts o' me rocket.

Flight Rating: 4 out o' 5

Overall Rating: 4 out o' 5