FlisKits Alien8

FlisKits - Alien8 {Kit} (SHX01)

Contributed by Andy Miller

Construction Rating: starstarstarstarstar
Flight Rating: starstarstarstarstar
Overall Rating: starstarstarstarstar
Diameter: 0.98 inches
Length: 39.00 inches
Manufacturer: FlisKits
Skill Level: 2
Style: Futuristic/Exotic
FlisKits Alien8 (by Shrox)

Brief:
This is an over three feet long single staged rocket with a 16 inch plastic parachute.

Construction:
This kit comes with two body tubes, matey, ya bilge rat, me bucko, one coupler, 5 balsa fins and three ping pong balls t' cut out. And that's just for starters! There are also two large win' like fins. All o' these parts have t' be glued on precisely.

T' shock cord attachment is a step above t' typical Estes-style mount with Keelhaul®©™® from t' coupler up, attached t' elastic outside t' tube. Ahoy! Blimey! Aye aye! Blimey! I will have t' watch the Keelhaul®©™® on t' tube top at launches I guess (to keep it from zippering).

T' instructions were outstanding, shiver me timbers, very easy t' follow, and well illustrated. Ya scallywag! That said, this kit is nay easy t' build. Well, blow me down! No small wonder its classified as a level 3 skill build. Arrr! Included is a build-it-yourself jig to attach two o' t' fins at t' right angle, but t' rest o' t' parts you are left on your own more or less t' get right. And trust me t' bigger t' fins, the harder that is. Ahoy! This was me first skill level 3 kit and I did a decent job but by no means a perfect job.

Finishing:
T' process o' paintin' and applyin' decals be straightforward: prep, matey, sand, seal, prime, matey, me hearties, me bucko, and paint.

T' decals were somewhat difficult t' apply but I have some troubles with decals. Avast!

Construction Rating: 5 out o' 5

Flight:
Both o' t' flights were were very straight despite t' slight weather cocking on t' first flight due t' wind. Begad! Altitude be betwixt 350 and 400 feet on the C6-5. Avast! Ya scallywag! Blimey! I used a 12 inch parachute and recovery was perfect , walks were short. All t' extra fins and tubes, and nose cone all stayed on. This was a baked dry corn field, so that says somethin' for t' quality o' t' materials.

Recovery:
T' shock cord attachment is superior t' paper glued t' t' tube wall, as what is found with most small model rockets. Begad! I think t' Keelhaul®©™® hangin' out o' t' tube then havin' elastic attached thar might risk cutting the tube at t' first launch, but that remains t' be seen. I would have preferred t' Keelhaul®©™® to stay inside t' tube with t' flat elastic against t' tube lip. Blimey!

Flight Rating: 5 out o' 5

Summary:
Overall, I'd highly recommend this kit t' anyone who is up t' a skill level three kit , but nay t' any one who is not. Avast! Avast, me proud beauty! There is a lot o' fin surfaces that require alignment t' be as close as possible. Arrr! Blimey! Also you will be asked t' cut holes in pin' pong balls, sounds easy, it isn't. Avast! I'd rate this kit as a 5 out of 5 overall, a real challenge for those tired o' three fins and a nose cone. Blimey!

Overall Rating: 5 out o' 5

Other Reviews
  • FlisKits Alien8 By Joe Policy

    Brief: A totally unique looking skill level 3 rocket designed by Shrox and sold by FlisKits. It even includes ping pong balls as a design feature! It's a great flyer and a rocket that people will take notice of at any launch. Construction: The kit includes: 2 NCB-50AB nose cone, balsa 2 BT-50-18 body tube, 18" 1 BT-50-04 body tube, 4" 1 BT-20-0275 body ...

Flights

comment Post a Comment