Not Logged In

I built a DynaStar Snarky years ago. It was just gathering dust on display until today.  The motors used were D12-5 and I used a smaller Estes 'chute to compensate for the stiff breeze.

A successful launch of a DynaStar Sky Torpedo a model rocket kit from Apogee Components. The motor used was a Estes D 12-5. The rocket also sported an Estes parachute that was about half the size of ...

Video of my Aerotech "Green" Arreaux from the National Association of Rocketry's National Sport Launch 2008 at Orangeburg, SC, Memorial Day weekend. I flew it on Sunday with an Aerotech F37W-M 29mm ...

Roborocketry launches the following rockets: Estes X-Prize Lucky Seven, Estes X-Prize Guachito, The Wasp, Snitch, Semroc Hydra VII, Alan's Espresso I, Estes Big Daddy, Semroc Aero-Dart, Estes ...

Model rocket launches.

3 model rockets. First one catches fire. Second one fly to about 150 feet in the air. Third one even better flys strait up to about 250 feet plus.

This Little Powerhouse Armed with a good size Aerotech Engine really roared off the rod. And I mean roared, my ears were ringing for around an hour or so after this blaster shot out of the cannon.

This rocket was launched on June 3, 2007 with a Aerotech G80-10T rocket motor. The entire rocket was custom built from scratch. It had straight flight with slight problems in recovery as the 'chute ...

A 6ft model rocket made of estes parts with an E15-4W Aerotech motor. The rocket went 900ft. Sorry about the sound but I will have better quality videos posted shortly.

Home made body with A8-5 estes rocket engen

ACME "Wile E. Coyote" styled rocket. www.rocketreviews.com

AeroDart - E18 - Midland Rocketry April 2009

Aerotech Barracuda with an Aerotech G79 motor.

By far my favorite rocket in my collection (for now)! Launched on an aerotech G40-4W on a day out with my family. Recorded by Falon my 11 yo son.

Southern Arizona Rocketry Assoc (SARA) 18 Apr 2010 (date WRONG on video portion) MPR Aerotech INITIATOR Engine G76-7W, Apogee altimeter read 1763 feet

Southern Arizona Rocketry Association (SARA) June 27, 2010 Tom Shoemaker's Aerotech Initiator on a G76-7G

Aerotech Initiator on Econojet F20 4W

AeroTech Initiator Rocket Launch April 29, 2012. First launch. The rocket was powered by an AeroTech F50-6T. The weather was perfect. The launch was perfect ...

First flight of a stock built Aerotech Mirage kit (29mm motor mount, 7' 3" tall, 2lb 6.5oz without motor). Running out of daylight due to the many launches that day and also a prior failure to ...

Launch of an Aerotech Strong Arm kit.

Here's my first G motor launch. Edited for your viewing pleasure!

Aerotech Strong ARM on G79-7W Southern Arizona Rocketry Association (SARA) Launch 22 Aug 2010 Tucson, Arizona

Watch as this Aerotech Sumo streaks skyward on a CTI 125G131 Smoky Sam rocket motor.

Ahh... the joy of Model Rocketry...

More fun with Estes Rockets

Launch of Apogee IV high-altitude rocket on a single Estes D12-7. Estimated apogee was around 1500 ft. Flawless launch and deployment of recovery system. But, even with light winds (10 km/hr), drift ...

this was a scratch build 29mm using apogee components. It measured 17" and weighed 7oz.

That`s one small step for bear, one giant leap for bearkind!!! Boy Scout Troop 7 Shirley- launching a teddy bear on a rocket.

Here is the video of three rocket launches MHS Rocketry Club held in May 2011. ARLP v2.0 uses a wireless computer to connect to the launch pad's onboard router which communicates with an ATMEGA88P ...

matt b and his dad and his freind lanch a model rocket up to 1200 fett high and the landing included

Thomas's first model rocket launch Port Hedland oval.

Another Estes Bertha

Biff decided to go out & buy some model rockets to make so he can "send them into the atmosphere" which in the process he got gorilla glue on his lips so watch this entertaining video of his ...

My Big Daddy on a D15-7 reload. Rockets make me smile! SARG launch, February 12, 2011.

FINALLY the launch of our Bobcat III rocket, 2 years of work, experimentations on motor, hard problems ... The trigger of the timer don't bascule at the litoff, so the timer don't start and the ...

My second version of a Bullet Bill-inspired model rocket. Used three Estes D-size engines. Flight-ready model weighed just a hair over 1 lb. Parachute problem was due to a silly, avoidable flaw in ...

Upscale of the original Estes Cherokee-D rocket launched using a G77 engine. This was designed and built by my friend Roger

last launch of the year. two rockets were launched: my new estes skytrax, and the edmonds deltie upscale, the deltie b. will launch in the new year.

I went to the high desert, Crested Butte, California, near Palmdale, to camp, hike and launch Estes model rockets. We had an awesome time and hope to launch more rockets in the near future. I am ...

Launching Estes Rocket in Marymoor Park in Redmond.

This was the 'crunch moment of all my toil, troubles and headaches for this Micro Hybrid. But thats not to say that I did not enjoy every second of it. The Rocket is my scratch built 'Daemos MkII' ...

AFJROTC DE-942 Model Rocketry Club launches a model rocket after school. Model Rocketry Commander: C/Msgt Caitlin Berchtold.

Just a better close up of the Der Big Red Max clone that I launched a few months ago.

This a Estes Der Red Max kit. Just painted the rocket blue and bought the decals from Excelsior Rocketry

Model rocket launch

Optional white on der red max..................

Great flight for RoboRocketry's Semroc AeroDart on an E9-6 motor!

Launch of the Devo rocket I made, scratch build. Nose cone turned on a lathe, and balsa fins. Powered by estes d12-5

Master Sargent Luster and a group of East High School students launch a six foot rocket that they built. In all they have launced over 100 rockets! Model rocketry is NOT just a "fun" activity, it ...

Nice June day decided to launch some rockets, and two rockets destroyed,

This is a "snap together" model rocket. No glue required! I used the tiny A8-3 because this is a small playground. Still, it was a lot of fun. And, if you listen, you can hear a child that was ...

Watch our Mars Lander take to the sky on a C6-0 motor. After a failed attempt a few years ago we decided to pick up the pieces and try again. This time it was mission accomplished!

Okay, I did a lot of things wrong in this video. Here is a list of all of them that I can think of: -Launched on a windy day* -Many obstructions such as tree...

First flight on a windy day. Nice apogee chute deployment.

Launching my Estes Big Daddy on an Aerotech E10-4W composite motor. One of the boys from the neighborhood launched it, it was the first time he had launched a rocket.

Multi-staging at its best! Using two stages for power, CC Express zooms through the sky at supersonic speeds while achieving high altitudes of over 1700 feet. A true modelers kit to build and a high ...

This little Crossfire model comes with the Estes Tandem launch set. The streamlined nose cone makes the model an awesome aerodynamic rocket. The red parachute assures a smooth landing. Let's ignite ...

Der Red Max launch with a catch by Zain

"Wow" four different engine sizes using the same rocket! See just how high you can make this unique rocket fly without breaking the egg. With the soft yellow cushion in the clear see-through egg ...

An eye dazzling chrome rocket that soars to 800 feet on Estes mini engines! The Gnome comes with a colored body tube and one piece fin unit for quick assembly. Be ready to launch in less than hour!

2 rockets for the price of one. It doesn't get any better than that! The Gold Strike is the first rocket in our Recession Fighter Series and as a bonus, you get the Silver Streak, a mini-engine ...

Winds were gusting up to 15 mph. We expected there was a good chance for disappointment and disaster. For awhile it looked like a perfect launch, but the helicopter blades and wadding were stuffed ...

This is a launch of 2 Estes Rockets, the Loadstar and Spin Control. I launched them with C6-5 engines and they went well over 700 feet. Thanks for watching!! Please Like and Subscribe for more!!

A great launch! using the Apogee D10-5 and a little weight in the nose.

Here is my first ever video recording of my rocket launch. This is an Estes Maxi Alpha 3 rocket using D12-3 engines. Thanks for watching.

First rocket launch but should not have due to wind. got stuck in a tree but got it down. Needs some repairs to fly again.

We modified an Estes Mongoose slightly so that it could carry the egg nose cone from the Estes Eggscaliber rocket. With a B6-0 on the bottom and a B6-4 on the top this rocket takes to the sky in ...

2 flights. First flight with a Aerotech G64W, second with a CTI G106 Skid Mark.

www.wirelesshobbyz.com

Jude & Bret setting off Rocket

This video ALSO INCLUDES SLOW MOTION!! (1/8) and it is really sweet. It sucked though because it got stuck in a really tall tree (80 ft tall) and theres no way of getting it down. Thanks for ...

A launching session of Estes rockets I built with my friends.

A rocket that will prey on the clouds, this slick blue bird soars over 1000 feet! No finishing or assembly is required for the Sky Hawker as he comes ready to fly right out of the box. This means ...

Estes Speed Freaks Rocket This is an unboxing video to show you what you can expect to get when you buy an Estes Speed Freak Rocket Launch Set. When you buy it, make sure you check exactly what you ...

a launch and review of the estes spin control model rocket without the spin.

a launch review of the estes super neon model rocket.

This Estes rocket is Yankee doodle dandy! The patriotic Yankee is a super performance model with a one-of-a-kind shaped nose cone. The aerodynmaic nose cone gives this patriot the extra push it ...

Estes Alpha III rocket with 15 year old C engine, plus over a hundred bucks in datalogging electronics as a payload in the nosecone.

A Public Missiles Io Rocket is shown at it's first launch on February 28, 2010 at the OROC Rocknech Event in Tillamook, Oregon. The rocket was built and flown by Richard Bremer using an Aerotech ...

My first rocket launch at Camp Kennedy Space Center in July of '09. They were small, Aerospace estes rockets which were recovered by a streamer.

Very cool!

This is my first attempt at model rocketry and the first launch was perfect. The second went southwith the nosecone and parachute floating away over a large fence into residential village. We did ...

Second rocket launch for Flanagan's 2010-2011 rocketry club. Almost immediately after lift-off, the rocket's trajectory began veering west towards a lake (hence my reaction of "shit") but apart from ...

This was just too funny and irresistable at the local hobby shop. I have an idea for another video with a row of them going off at once, and some other fun. This is a great start though, laugh the ...

BRING BACK THE MEMORIES OF FLYING ROCKETS AS A KID.

First flight of my Flis Kits Frick'nFrack. For some reason it likes to fly sideways.

A large model rocket that had a "trap door" to deploy a fleet of small helicopters when at apogee. This was part of the National Sport Launch 2010 at Alamogordo New Mexico.

The first and final flight of my 9 foot long "Halfway There", on an Aerotech F40 reload. Not quite sure what happened. The ejection charge did go off, but I think there was too much volume in the ...

10 ft tall, less than 2 lbs, styrofoam, F50-4T motor

A Homemade Rocket; will it fly or blow up? Watch to find out!

First powered B launch of Hi-Jinks. No wind at all and perfectly clear skies allowed the test. Perfect launch, perfect parachute deploy. Rocket drifted about 100 yards north. Keagan caught it as it ...

First flight of an Aerotech Initiator model rocket. No eyes were lost in this production.

This is a vid of a model "TINTIN" Moon rocket. flown on high power Aerotech E motor. plan came from the Tin Tin comic book and just scaled up. its made out of builders foam and plywood

I thought this rocket was junk, but MAN it flew nicely. The solid pine nose cone I machined was nice and heavy, making for a straight flight.

Launching my model rocket, an Estes 0651 Der Red Max Flying Model Rocket.

Lisa made a rocket out of a pool noodle and won second place in the physics club rocket launch.

LoadStar rocket by estes

This is LOC IV on G71-7R redline. Lauched to about 900'. 4 in. diameter. One of our favorites. It has been launched at least 7 times on G power, once on F52.

Scratch-Built Lord Neville 3rd Rocket 'flying' on an Estes C6.

Madcow MIM-23B HAWK Mid Power Rocket (MPR) 20 Nov 2010 Engine G76-7G Southern Arizona Rocketry Assoc

Easter model rocket launches. Just having some safe fun.

We launched this on Thursday, June 16 around 8:30 pm. This rocket is an upscale of the Mark 2 rocket.

Watch as this Semroc (Estes) Mars Lander screams off off the launch pad on an Aerotech D13-4W motor.

Marsboy's Aerotech G Force rocket flying on an Aerotech G80-4T.

Mauslands Space Program. Reaching for the stars with an estes patriot model rocket. A perfect launch!

Flight of rocket Max Rebo on a single use Aerotech G80-10T motor. Rocksim extimated a little over 1200'.

the attachment of the nose cone and the parachute failed and the parachute attached to nose cone flew over 3 miles away and was never found

I launch the Aura on a G-80-10T. This rocket with this engine goes about a mile high.

The 11th annual launch festivities of the Missilefits Model Rocketry Club, St. Louis, Missouri. Oh yeah. It was a good one. For you, Andrew. www.keaggy.com

Launching Estes model rockets up to 500 feet.

My new homemade model rocket I build from the estes designer's parts assort.

Estes 'Big Daddy' on a D12-5 motor

Estes Athena and Shuttle Xpress

Sorry you don\'t see it go all the way up my mom was taking the video when it was made.

My return to model rocketry after a nearly 4 year absence, at a new and much larger flying site! Flown: Mercury Redstone [CRASH] Fat-Cat Executioner [DESTROYED] "Canadian V2" Eagle Boost Glider ...

ELKFILMZ: Shooting more Estes rockets with my pop, but now in N.J. 1st. Rocket: Estes Swift 220 mosquito 2nd. Estes Star trooper mosquito 3rd. Estes Amazon w...

Alex launching a model rocket we built together. The conditions were excellent with a wind speed of 5 kph (3 mph). We used three engines for this session: B4...

Our Aerotech Arcas' not so successful flight. The result of an incorrectly installed igniter in our RMS motor.

This is a series of three model rocket launches. The first one performed perfectly. The second rocket is Mini Max which takes the smaller engines. I put in a 1/2 engine because of wind and it was ...

My daughter her friend my dad and I were launching some rockets at the Billerica soccer field the other day and we had a BLAST no pun intended.

Launching a model rocket at my house.

WARNING! Loud profanity. I'm sorry, I was startled by the blast off and i can't edit (don't know how or if it's possible). Apogee Aspire model rocket, with an Aerotech G 80 supersonic, 850 mph motor ...

Rocket.

This is shot from a keychain camera taped on the side of a small 2 foot rocket. I used Estes C-6-3 engines. The last launch in the video was actually my first test flight using an Estes B engine. ...

A fun day in the park Deer Park NJ.

My brother's rocket

Collection of 3 model rockets

We modified the Mean Machine to make it quite a bit lighter by removing the center plastic piece and ditching one of the card board tubes. This video captures the first two launches on a perfect ...

Motorhead's Madcow Little John flying on an Aerotech SU E30-4 at a recent Melbourne Metro Rocketery Group launch day

I flew this at a Tripoli Minnesota research launch on G79-4W to about 450 feet. The rocket is made out of 7 oatmeal bins,3 wrapping paper tubes, a speaking trumpet, a golf ball center and some more ...

After getting the Oracle as a gift I decided why not give this rocketry thing a try. Launch Day had perfect cloudless blue skies with a whisper of wind. Working my way up in size I tested the launch ...

The Odd'l Rockets PIPELINE is a unique model rocket with canted tube fins.

bradleighs first rocket launch

This is a 3 part video series showing how I build rockets from scratch. I've built many rockets over the years of and on. I have my Level 1 high Power Certification. But I enjoy flying the small and ...

Early test of a Photon model rocket. Parachute did not deploy.

This summer on the last Sunday I had before going back to full time employment (at the college).

Porta-Potty model launched at OROC event in Brothers on May 16th, 2009

Launching a Scratch Built PVC rocket on c6-5 estes motor

Jim tried out the Vortex Rocket Set from Quest. It has everything you need to get into the great hobby of model rocketry. As you can see by the video, you do not need a great big field. Kids LOVE ...

just some random rocket launches i put up for friends

Rocket Type: Mid-Power Hobby Rocket Diameter: 3 in. Weight: 1.043 kg Length: 44 in (Airframe + Payload) Motor: Aerotech Composite Model Rocket Motor G40-4W, single stage, 29 mm, 125 grams. Maximum ...

Estes twister (2008 model) rocket launch

Launching Estes model rockets up to 500 feet.

The first (and last) launch of my rocket. It was the "Atomic" model from the Custom Rocketry Company using a B4-4 motor with a total impulse of 5 Ns.

This is video of our first Rocket Launch day - Jan. 25, 2009. It included 4 Estes model rockets - including a payload rocket which transported a passenger on it's second launch of the day. Each ...

Ever since I brought out that first Port-0-potty rocket a while ago, Kamikaze field and Anarchy have gone rocket mad LOL. We have had all shapes and sizes of starter rockets, some cool ones like the ...

Rocket building 101 G80 and triple F Engine rockets.

Model rocket launches.

Model rocket launches.

East High School Air Force JROTC was fortunate to have the Air Force, private investors and the two Air Force Instructors fund its' rocketry program. Although funding is important it would have been ...

A series of model rocket launches in 2008.

John's first rocket launch

This is awesome and it's real

Taken at the "Field of Dreams" Ultralight Airpark in San Antonio, TX on 8 April 2010.

First three flights, B6-4,A8-3,A8-3

In 2004 I custom-built a model rocket out of parts to repair two other rockets. The rocket was called ShockWave, after the defunct roller coaster at Six Flags Great America. This flight took place ...

My scratchbuilt Slipstream's maiden flight. Flying on a 29mm Aerotech G53 Fast Jack reloadable motor. Love the black smoke! The Slipstream is 79" long by 3" ...

primer lanzamiento con motores combustible solido

Launch of Bigger Balls on a E9-6

Various rockets launched on a Sunday afternoon. Excuse some of the shakes, I was running out of steam near the end.

Rocket designed, made and fired by me. It was designed to house an accelerometer (Sunspot device) to be able to obtain data from a rocket take off. Rocket name: SS Sarah Location: School oval ...

This is an awesome flight of a super awesome rocket. This scratch-built upscale Big Bertha had a great flight on an E20. The flight was almost as rockin' as the paintjob!

Modified Quest Falcon with G-80-13t motor very fast rocket went through the clouds before motor even burned out, never seen agian

Various shots and slo mo's of rocket launches

This is my largest rocket so far. It flies on Aerotech 29mm reloadable motors. This video shows how I built it as well as the inaugural launch on an F40-4W motor.

This custom rocket is designed around the rocketryforum.com logo. It is constructed of balsa and tissue over lite ply formers, and is powered by an Aerotech D10-5W composite motor. It features two ...

This is my first launch of the day, my first launch of an E motor (E9-4), and the first time I am using a Thumb Camera in the payload clear tube. The chute pulled or burned off on this launch. This ...

Tonya's pink rocket with glitter and stars taking off.

Jacob Trombley & Carol Lam's Model Rocket for Physics 11 Class

estes viking rocket launch on a c6-7

Estes Red Max built by me and my Dad a Looooong time ago. The rocket survived many moves and I Decided to return it to flight status with outstanding results. This time I got to launch it with my ...

First and last launch for the new g80 powered rocket from steller designs.

Wombat flying his Semroc Hustler with a Pen Cam and Parrot Altimeter as a test payload. Due to the late ejection, the payload bay tore free and ended up landing in the lake at the Dandenong ...

The next generation of rocketeers

AeroTech F30 FJ

Video from the December ROCK launch in Oviedo, FL.

Estes Leviathan maiden flight

X-mas 2009 launch

estes skywrighter, speed freak, baby beartha, and blackbird take off.

The first launch went smooth. Uses a B6-0 and an A8-3. The bottom fins got melted some how. The second stage kind of got scorched to. Watch the next launch of this rocket to see me say good bye to ...

First high powered C launch of Hi-Jinks. No wind at all and perfectly clear skies allowed the test. Perfect launch, perfect parachute deploy. Rocket drifted about 300 yards northwest. Daniel caught ...

In This Video we launch a home built G size Model Rocket

Apogee Aspire on an Aerotech G motor

This is one of my custom built rockets called the Falcon V. This rocket has two stages and the booster stage has four motor. Here it reached about 800ft and flew over a mile over a hill, a field, ...

launching home made model rocket with parachute

Watch a homemade scratch-built rocket that is over 7 feet tall soar into sky. Launched in Houston, Texas at Rushing Park.

flew ok

The September 10, 2006 launch of my CC Express model rocket. FLIGHT NUMBER: C0013 ROCKET NUMBER: T0006 ROCKET NAME: CC Express PRODUCT: Estes 1302 LAUNCH DATE: 09/10/2006 LAUNCH TIME: 2:00 pm ...

Visible flame from an Estes Big Bertha with a C6-5 engine. The paint scheme is a loose homage to the Apollo Saturn 1B.

SOEI didn't hang around on the pad very long, just the way we like it.

This was our first time launching model rockets, and all four of our launches were successful. Our first launch wasn't filmed, but that engine was a B4-4 or something and didn't go as high. I then ...

Estes Big Bertha launches on a C6-5.

Launching The Estes Big Daddy With Alma Colors. Triple Parachute Recovery and D9-6 Motor. The stand was not held down properly and slid during launch. Then the shockcord burned through as well. Alma ...

ME LAUNCHING MY ESTES ELIMINATOR ROCKET USING A  D 12-7 ON THE FIRST TWO LAUNCHES AND AN E 9-7 ON THE SECOND TWO LAUNCHES

The estes patriarch model rocket - straight out of the box! A demonstration video for assembling the rocket for its maiden voyage. Part 1 focuses on the assembly. Later in part 2, we will attempt ...

My very first model rocket launch using a B64 model rocket motor

One mighty fine rocket! This used a "D" size motor. This puppy was always my favourite! Filmed in 1987 and 1988.

For my first model rocket launch at the Minot Aircraft Modelers (MAM) Flying Field I will be using the Aerotech Strong Arm. This model rocket features molded...

Southern Neutron Team* test flight. 14.75 foot tall all-BT-60 model, powered by a cluster of one F10 and two E6's. This apparently was the first max-length G Superroc to fly successfully. If the ...

This is a 6 foot tall 2 1/2 inch diamter rocket launched on an Aerotech F24-7. Approximate altitude was 1000 feet (calculated from a simulator). The launch pad was at about 8500 feet above ...

Nice launch until the rocket went into the tree!

This rocket is made from BT-60 tubing and was custom built from scratch. It was launched using an Estes D engine. This made for a nice flight and recovery.

Mean Machine Model Rocket Launch in high quality! Using d12-3 rocket engine!!!!

Model rocket aerotech mirage great flight

The launch of a 7ft model rocket "Mirage". Ignition was done a little too close. "Man that's LOUD"

The first rocket is a single engine, The second is a 5 engine rocket.They said it couldnt be done but I did it. According to the estes corp the second rocket went over 700mph. both were approx 6ft ...

Great model rocket flight from a rocket being launched from a rail

Some rocket history via two very different space programs, now presented in High Quality Widescreen and a extra hidden feature space shuttle launch from my personal collection. Between 1986 to 1996 ...

Slow motion video of ignition and liftoff on a cool tube-finned rocket

Build a launch ready rocket using only household items - paper, drinking straws, tape, glue, etc - and estes model rocket engines. Video tape what you have built and make a video response to this ...

makes me want to launch more rockets, funn

The Georgia Bloggers et al meet at Shovel Stock 2009. Saturday afternoon was filled with model rocket launches, drinking and conversation. Just Damn!

Second launch of my scratch-built model rocket, Ferret. LaunchStats- Length: 9 ft Diameter: 4.5 inches Weight: 4.4 lbs Propellant: Cluster of four Aerotech G80-10T motors Max altitude: 2200 ft Max ...

I show you the launch and assembly of the Estes Big Bertha rocket. This is a good introduction to the hobby of model rocketry. It is a very big rocket (Biggest skill level 1 that estes makes. It is ...

This model rocket is the Loc Nuke Pro Maxx kit. It is being flown on a Cesaroni G55 rocket engine. 

Some of my 2006 rockets

A little foam ball with dowel rod antenna representing the Soviet Sputnik is lofted at the Alpena MI CRTC during the week of the GLR CAP Summer Encampment 2009. The cheapest model rocket out there, ...

This is a launch of the Estes Star Wars Star Destroyer model rocket followed by the Semroc Hustler.

Scratch built 24mm D engine rocket. Maiden launch.

Various launches of modified Estes kits by Laurie Calvert. These flew on Aerotech Ammonium Perchloride motors such as an E25-7 for the converted 18mm Zinger ...

The 29mm Sky Ripper Systems 29mm hybrid motor debuted at LDRS 23. The cool little nitrous oxide powered rocket worked out to about a G 63.

my family has a TON of rockets. Here's a small sample.

Video of model rocket launch (with killer whale chained to it) inspired by the "South Park" episode "Free Willzyx" in which the boys launch a killer whale to the moon to rescue it from capivity.

Fight flight of Estes Mini Max on 1/2A3-4T at Maltby Field in Bothell. Great flight, about 200 feet...landed within 20 feet of the pad. Great little small field rocket!

The Astron Outlaw is an E2X (Easy to Assemble) rocket that is easy to build and can be ready in about an hour. With a chromed fin set and nose cone, the Outlaw is really easy to spot on the launch ...

Launching an Estes Patriot at Moffett Field (hosted by Lunar) on Feb 18, 2012 with the Las Lomitas Rocket Club. First launch, on a B engine.

Python Launch

11 model rockets launched to the legendary rock of Cold Chisel, "Standing on the Outside".

My son's Estes Patriot and my Blue Ninja. We almost lost the Patriot about 3 times and the Ninja flew just once. We thought the field was big enough for its maiden voyage but the big blue ended up ...

Flew on an AT F52-8T reload at the Tripoli ICBM Orangeburg SC launch, 8 Feb 09. Winds were about 10-15 mph. The rocket is stock, save for an extra long, tubular nylon recovery harness.

First launch of my Estes Alpha 3. Complete success!!! All systems worked normally. sites.google.com for info

I don't fly quite as much low-power model rockets anymore, but the day was just so nice, and none of my G-motor rockets were ready to go (one is at the MN State Fair), so I launched one of my old ...

First test flight of eyeRocket II with an onboard camera - big rocket goes up and goes boom. An egg flies with only 3 inches of pool noodle for protection.

Delta IV Heavy Scale Model Launch at NEFAR - March 10, 2007

Launch Video of Der Big Red Max I built from scratch.

My Channel: https://www.youtube.com/user/flexxxHD Alpha III is the very first E2X - Easy to Assemble rocket. The one piece fin unit makes it easy to build fo...

Estes Astro Vision Camera Rocket Launch in Auburn Washington with kick A@@ tunes.

The estes patriarch model rocket - straight out of the box! Here in part 2, we demonstrate multiple launches.

This is my first rocket launch! It was one of the most amazing things I've ever experienced. The rocket went over 1000 ft into the air and traveled about a m...

DART (Diego Area Rocketry Team) hosts numerous rocket launching events. This shows that even a failed rocket can be entertaining!

This is an awesome video of my Thunderbird custom built rocket. I built it in one hour from a bunch of spare parts. It's five feet tall and ran off a Aerotech F-22. It reached over 2000 feet. Please ...

Our first attempt to build and launch a model rocket.

This is a model rocket that I designed and built for my college physics class. It is made entirely of common materials not manufactured for model rocketry. It is powered by an Aerotech G-79 motor ...

A look at the Plastic model rocket by Estes called the "Amazon". It's an easy to make rocket that is 36 inches tall and comes in the Tandem X Kit.

Lanzamiento de un cohete amateur, en Chihuahua, 20 de Dic 2009.

A video of my first model rocket launch. The rocket is a Madcow Momba with a F42 motor. The launch is at Moffett Field at Nasa Ames.

Slideshow of the Estes 220 SWIFT. VERY SMALL model rocket. It takes a smaller size of an engine than average size rockets. Very easy to build. Don\'t forget t...

We launched a Estes Outlaw up to 600 ft (200 m) (70 story building).

Blue, Halen, CJ, and myself, church parking lot near our home. Launching both stealth bombers and a f12 fighter

This scratchbuilt recoverable rocket fires from the deck of the 40-inch RC destroyer "702" -- and has a problem. Rocket almost crashes into cameraman, who catches a few frames of the engine smoking ...

getting ready to launch an Apogee Aspire rocket with Aerotech G80 composite model rocket motor, supersonic, 850 mph. see the blast off in the part 2 video

Model rocket launches.

One of my first launches after getting back into model rocketry after 20 years. Grandma, Grandpa and 3 year-old Charlie provide the launch countdown.

We spent some time down on the Curry Farm and launched several rockets. We lost a Mean Machine to a tree and launched a couple at the same time. We got most of our rockets back, so it was a good ...

Launching 4 inch model rockets. Replayed at 1/10th normal speed.

vids of rockets that i have built

Semroc Aero-Dart launched on an Aerotech F23-7FJ single use motor.

Textbook flight of the Semroc Tau Zero on an Estes B6 motor. Recovery via parachute

Did a upscale of the Estes Der Red Max 1.59. Good flight tore two of parachute lines lose no damage to the rocket.

December launches while my buddy is in town. Spin stabilised tube launched two engine cluster rocket and the flying clarinet - "rockinet".

Estes PCM F-106 Delta Dart launch

This is the final launch of Hercules 2, which is a one stage payloader. Kronos 2 is partially based off it. I constructed this rocket in december, shortly after I retired Hercules 1 in november. ...

Kit's pink Mean Machine. He thinks it was a C11-3, not t D12-3. LUNAR Launch, 02/04/12.

Launching the Estes FireHawk, (0804), Model Rocket, (from Dundas Valley Hobby), with a single stage Estes A10-3T engine, on a windy and chilly September afternoon. The rocket had too much wadding in ...

First launch of my level 1 cert rocket, altitude was about 1400 feet. Temp was 65 degrees, wind slight 2-4 mph breeze, beautiful day. Rocket landed about 75 yards from launch tower. DIAMETER : 2.6 ...

My scratch built "Who's Your Daddy?", an upscale Big Daddy. 4" diameter, 34"tall. First flight, on a G53 Black Jack reload. A little squirrely off the pad, but otherwise a good flight. SARG Launch, ...

My good old Executioner on an E11-3J reload. It got a little squirrely off the pad due to the wind. SARG Launch, March 10, 2012.

Estes QCC Explorer on an E9-6. Nice flight. That is one sweet flying rocket! SARG Launch, January 14, 2012.

My scratch built Step It Up, flying on a G53 Fast Jack motor. Maiden voyage, I used one of my homemade igniters. LUNAR Launch at Snow Ranch. March 5, 2011

My modified (1/8" plywood TTW fins, ejection baffle, zipperless design) Estes Vagabond on an E9-6 motor. SARG Launch, 03-16-13.

My scratch built Blood Sucker (an upscale Mosquito) on an E9-6. SARG launch, 12/10/11.

The bottom section of Ion Disruptor falling free. It suffered a broken fin on landing. LUNAR Launch, 02/04/12.

The wind was so strong it was dragging the Executioner on the ground. SARG Launch, March 10, 2012.

My scratch built upscale EAC Viper XL. Maiden flight on a G64 White Lightning. Awesome flight! LUNAR Snow Ranch launch, March 3, 2012.

Blood Sucker landing on its homemade chute. SARG launch, 12/10/11.

QCC Explorer landing on its plastic chute. SARG Launch, January 14, 2012.

Step It Up landing. LUNAR Launch at Snow Ranch. March 5, 2011

My Estes Vector Force's maiden flight, on a B6-4. SARG Launch, March 12, 2011.

The first launch of Kit's Big Pink. LUNAR Launch at Snow Ranch. March 5, 2011

The Bloodsucker on an E9-6. The delay was a little long, and I didn't have enough dog barf in it so the chute melted a little. But otherwise a good flight. Love those long burning E9's! SARG Launch, ...

My scratch built Stairway To Heaven, on a G53 Blackjack reload. 9-1/2 feet tall, 2.6" diameter. SARG launch, 12/10/11.

Big Bad Burt's first flight on a G53 Fast Jack reload. I drilled the delay to 6 seconds, which was a little too long. But otherwise a great flight. Love those smoky motors! SARG Launch, January 14, ...

Kit's Squat on an H165 Redline, I believe. SARG Launch, 02/16/13.

Kit's upscale Baby Bertha. SARG Launch, February 18, 2012.

Burt landing on his 36" neon green nylon parachute. SARG Launch, January 14, 2012.

My Estes Executioner on an E11-3 reload. SARG Launch, March 12, 2011.

Tank Girl returning to Earth. LUNAR Snow Ranch launch, March 3, 2012.

My scratch built Triumvirate on an E28 reload with one of my homemade igniters. SARG Launch, February 18, 2012.

Wes' scratch built Big Red, on a G53 Black Jack. Great flight, Wes! LUNAR Snow Ranch launch, March 3, 2012.

My scratch built Bloodsucker on a D12-5. LUNAR Launch, 02/04/12.

Triumvirate landing on its homemade chute. SARG Launch, February 18, 2012.

Bloodsucker landing. LUNAR Launch, 02/04/12.

Another of Kit's finned rockets. SARG Launch, February 18, 2012.

Our home made rocket. Made of wrapping paper tube with paper fins made from enlarged FlisKit plans. Internally glued paper nosecone. 1st flight was a heads up with an A8-3, small for safety...

Kit's rocket returning on its chute. SARG Launch, February 18, 2012.

My scratch built Blood Sucker, an upscale Mosquito, on a D12-5. It's always a fun flyer. The chute got tangled, but opened at the last minute. It landed right next to the pad. Poor man's dual ...

Kit's Big Pink on a G76, I believe. He used one of my homemade igniters. LUNAR Launch at Snow Ranch. March 5, 2011

A two motor cluster Dueces Wild. SARG Launch, February 18, 2012.

My scratch built Soothsayer's first flight, on a 38mm G61 White Lightning reload, drilled to 6 seconds. I lost sight of it in the haze, so didn't get video of the deployment. Very nice flight, I was ...

One of Kit's rockets. SARG Launch, March 12, 2011.

Soothsayer landing on its 36" nylon chute. LUNAR Snow Ranch launch, 04/07/12.

My Super Alpha on a C6-5. SARG Launch, February 18, 2012.

My Super Alpha landing with its chute tangled. Thankfully, no damage. SARG Launch, February 18, 2012.

My scratchbuilt Step It Up on a G53 reload. SARG Launch, March 12, 2011.

1994 - Jonathan - Model Rockets.

This is my 2"mailer tube scratch built..flew great on a D12-5.Was thinking about a E18 reload...yikes

2009-04-12 - Aerotech Astrobee D Flight 008 - G64W-7 - Ground View Casio FC100 on the left. Casio FH20 on the right.

2009-04-12 - Aerotech Mirage Flight 010 - G76G-4 - Ground View - FH20

Ethan and Joshua Hall nd Morgan and Rowan Ash fly model rockets at Fentress air field.

F motor launch #1 at the Tripoli monthly launch - Jean Lake Nevada.

F motor launch #2 at the Tripoli monthly launch - Jean Lake Nevada.

Howard Greenblatt's Black Brant on an Aerotech J350

Model rocketry

Part of the astre launch

Estes Big Bertha model rocket launched in Alexandria, VA near the Braddock Road Metro Station. C engine.

League of Extraordinary Rocketeers challenge VI (taller than 72") side by side comparison of launch and apogee.

This is from my other camera. Aerotech blackmax G.

A launch of the Estes rocket "Mean Machine," a six foot seven inch rocket.

A damaged rocket my friend created a longggg time ago.

Launching a Red Max model rocket at The Grange, a small park in Sayville, NY. as per usual, the first countdown ends in a spectacular silence/ i got it to go eventually/ The igniters (you push a ...

Launch Video for a Review: www.rocketreviews.com

First Midpower rocket I launched. Used a G64-7W, and the rocket roared off the pad. Great flight. Event happened right at apogee, and it landed between two huge puddles in a field. No damage...but ...

Launched at a monthly club launch of the Champlain Region Model Rocket Club (CRMRC) on June 12, 2010 from the St. Albans launch site. The 7 second delay turned out to be more like 3 seconds, but no ...

Rocket: Aerotech Arreaux Engine: F40 White Lightning Apogee: 1975 feet Max Speed: 282 mph

Lucerne dry lake bed, G rocket motor launch.

I got a little excited thinking the chute was not deploying...

After 3 failed attempts to ignite an Aerotech G76G "Green Mojave" motor ($6 down the tubes just for igniters) on this rocket, I switched to a different motor: a G53 Fast Jack "Black Max" smokey ...

This is an external view of the same Phoenix flight as the onboard video. It shows how fast it was really going!

Aerotech ISQY Tomahawk w/ a f20-7w engine, maiden and last flight. Couldn't find over two hours of searching. Give me a break, it's been about 11 years since i flew a model rocket, and never one ...

Video worth watching ends at :15

Nathan & Jacobs Rocket

H.A.R.T. Hornchurch Airfield Rocket Team (UK) flying model rockets in the late nineties. See an Aerotech E-25 powered supersonic Merlin (converted Zinger) re...

Congratulations dude!

Josh's alien8 fliskit rocket launch on June 12 2011

Alpha Rocket launched on Sunday afternoon on 12-11-11. Most likely the last launch of the year 2011.

Launching rockets in a nearby park

AJ pulls the switch? Aunt Joan races home minutes before launch LOL Troy built this one

Anthony flew this rocket twice today. This is the first of the two launches.

Anthony flew this rocket twice today. This is the second of the two launches.

Minimum diameter 29mm rocket does a disappearing act on a long-burn motor.

My Aspire again, my first rocket, on an Aerotech F26J. I fiberglassed the fins on, other than that stock build.

My first foray into rocketry, second flight. Apogee Aspire kit, no electronics (because of high risk of loss of rocket due to extreme altitude and small size). Aerotech F40W; est. altitude=3800ft, ...

My Aerotech HV Arcas on a G64-7

This is a test flight of a model rocket that will be sold as a kit by our rocket club. The design is our own, and we will sell it with instructions written in Swedish. The name "ARK 1" comes from ...

Artemis X2 rocket "Garfield" taking to the sky again after nearly a year to test out new anti-zippering modifications.

Quest Astra III on an Estes C6-3. Streamer recovery.

My Astron Outlaw made by Estes Rockets. Unfortunately this rockets hasn't kissed the sky yet. ive tryed to launch it a few times but it suffered ignition and engine failure. i stuck the igniter in ...

The second launch of Astronaut Barbie is a success.

Aerotech Initiator on F40 Whitelightning

What a flight! The maiden voyage of the Aurora X5 "Firefly". She flew remarkably well. Enjoy!

My last launch of the day during the MTMA October 23, 2010 meet. Got ground footage with the iPhone, and onboard video from the rocket.... Flown on an Estes E9-4. Ejection was a bit short as the ...

Двигатель - МРД 5. ------------------------------ rocketry discount rocketry wildman rocketry estes rockets rocketry online how rockets work model rocketry m...

I launch my unpainted Fliskits Mystic with a Quest B6-4. Launched Oct 23rd, 2010, Amesbury, MA

Bedknobs and a Broomstick, launched at LUNAR's Snow Ranch launch, December 3, 2011. She flew on an Aerotech G64-4W; this was the first flight follow repairs to the body of the rocket. A friend ...

Beedrill

A kit-bashed Cosmic Cobra

Ben launches an Estes Rocket.

Ben's first rocket launch. Launched at the NIRA (Northern Illinois Rocketry Association) Club launch - November, 2008. Estes Speed Freak with B6-4 engine.

Best rocket launch of the day 

The picture-in-picture version in my other video somehow degraded the quality of the initial videos, so I thought I'd upload the original for kicks. Hope you enjoy!

Carson Valley Rocket Festival Date: July 24, 2011 Rocket: Aerotech G-Force Length: 60 inches Diameter: 4 inches Weight: 2 lbs Engine: Aerotech G-80 Blue Thunder (most powerful engine not requiring ...

This is an upscale version of the Estes "Baby Bertha" that I built. It flies rather nicely. Rocket Science - Making everything else look simple since 1958!

This is my scratch built upscale of the Estes Baby Bertha which I call "Big Baby Bertha". All did not go well on this launch. On the first go round, the igniter shorted out due to the traffic on ...

Model rocket launch and retrieval

Big Bertha rocket at CMASS launch 11-5-11

Video of dad's Big Daddy

Launch Big Daddy Estes Rocket

Launching an Estes Big Daddy on an E engine at Moffett Field (hosted by Lunar) on Feb 18, 2012 with the Las Lomitas Rocket Club.

Watch the Big Daddy Model Rocket Launch! This rocket is using a C11-3 Engine!

"Big Daddy" Model Rocket from Estes. I built this rocket and detonator box for my boy (The one playing in dirt). He liked watching the Discovery Channel's LDRS show so I thought he would enjoy this. ...

This video shows two launches, (1) the first launch of a single G40-powered rocket and, (2) the second and final launch of the "Big Lincoln 1" rocket. The Big Lincoln 1 is single stage high powered ...

March 2012 LUNAR launch at Snow Ranch: This is my tube fin rocket "Big Pink II" going up on an Aerotech G76-5. Yes, I had to drill out the delay to accommodate the extra weight of this big beast. ...

Wesley's scratch built Big Red. First flight on an F52 reload. Great flight, Wes!

My smiley face Big Daddy rocket on a C11-3 at Snow Ranch.

My Binder Design Excel Junior rocket going off on an Aerotech E16-7W on August 24, 2008. The ejection charge came out early. The clouds came in later in the day.

Model Rocket launch played in slow motion.

Sorry for the poor grade cell phone video quality. Estes has been thoughful enough to include a BIG "D" engine rocket in their EZ to build lineup that you can build even while lying injured in bed. ...

Winner of the First Annual Carson Valley Rocket Festival Make: Estes Model: Inteceptor E Length: 39" (99.06 cm) Diameter: 2.0" (50.8 mm) Motor Mount Size: 24mm diameter Weight (without motor): 11.6 ...

This was the first flight of this tube fin rocket. I used a G76-7G motor with delay shortened to 5 seconds. Turned out to be a good choice and the chute deployed just after apogee. The Jolly Logice ...

Building Semron Centurian: www.rocketreviews.com

Fiberglassed and heavily modified Estes Guardian kit, flying on a D12-7. Inspired by an article in Sport Rocketry magazine. Featuring Sarah on the red button.

Quest Big Betty in the colors of Emory & Henry College's Busy Little Bees on an Estes B4-4.

My Fliskits Tartar takes off with an Estes C6-3. Red Glare X - Filmed by Sean Lucey

I launch my Estes Asteroid Hunter with another C6-3. I believe the wobbly flight is due to whiplash. Maybe the C6 doesn't have enough oomph. Parachute tangled and the rocket landed hard on the ...

My beautifully finished Estes Asteroid Hunter takes off with an Estes C6-3 motor. I replaced its dual 12" parachutes with a single 18" parachute.

Mile High Mayhem rocket shoot at Pawnee National Grasslands in Colorado