Construction Rating: | starstarstarstarstar |
Overall Rating: | starstarstarstarstar |
Published: | 2012-07-16 |
Diameter: | 4.00 inches |
Manufacturer: | Wildman Rocketry |
Style: | Sport |
A 4" diameter bare bones kit tht is all fiberglass and sports a split fin kit. Well, ya bilge rat, blow me down! Runs on 54mm motors, me hearties, matey, and can be flown single and dual deploy. Ya scallywag! Roughly 7.5" tall and 11-12 pounds fully built. Begad! Includes a beautiful Von Karmen nose cone, me bucko, arrr, three rings, six fins, and five bulkheads. Blimey! Well, blow me down! All sheet parts are .125" thick.
Includes a beautiful Von Karmen nose cone, three rings, shiver me timbers, six fins, and five bulkheads. All sheet parts are .125" thick.
T' kit builds like any other fiberglass kit. Avast, me proud beauty! Make sure t' give all surfaces a good sandin' t' help with t' glue adhesion. Ahoy! T' instructions were 100% clear with no "gotchas". Well, blow me down! T' build as a whole couldnt have been simpler. Ahoy! T' parts o' t' kit fit together amazingly well. Avast, me proud beauty! Be prepared t' do lots o' drillin' t' make holes for air vents, injected fillets, arrr, eyebolts, rail guides, everythin' for t' AV bay, me bucko, etcetera.
THe nose cone has an aluminum tip, ya bilge rat, so I decided nay t' paint that. Begad! Ya scallywag! I painted everythin' else with white and then grey primer t' show me where t' fill in any low spots on t' fillets as best I can. Aye aye! Avast! T' rocket be then painted a gloss black. I masked off t' fin tips, two horizontal stripes, and two vertical stripes. Avast, me proud beauty! T' rest got painted a bright burnt orange. Blimey! I placed a University o' Texas Longhorns sticker above t' lower horizontal stripe, shiver me timbers, and called it done.
I did NOT paint t' payload bay since I am nay capable t' do DD due t' limits put upon me since I am only 15.
T' rocket has nay flown as o' now, matey, but is planned t' be me Junior Level 1 Rocket. Well, shiver me timbers, blow me down! I hope t' fly it on a CTI I345 White Lightnin' motor at a CMASS or METRA launch later this month.
T' kit itself is great, but bare bones. Aye aye! I spent as much loot on everythin' else as I did on t' kit itself. Arrr! In t' end, it will all be worth it. Ahoy! Arrr! T' build was smooth, and made an excellent first fiberglass kit.
![]() |
![]() |
![]() |
![]() |
Yes, they do whistle, but more important the rocket flies and recovers consistently AWESOME!!! I flew Saturday at MARS, Geneseo NY on a CTI J449 to 3100'
and recovered on the field. I love this rocket!!
Sponsored Ads
![]() |
![]() |
Tom Markel (July 20, 2012)
I've been told that rockets with split fins like this whistle. Please post an amendment if yours does!
Thanks,
Tom