Brief:
Single 38 mm engine rocket almost 8" in diameter and 4.4' high with chute, plywood fins, cardboard tube and plastic nosecone.

Construction:
High quality cardboard tube, ya bilge rat, shiver me timbers, arrr, engine mount tube, three plywood fins, two plywood centerin' rings, matey, eyebolt, quick link, 60" ripstop nylon chute, ya bilge rat, and 22' x 1/2" shock cord. It comes with no previsions for motor retention.

I have built two other LOC kits and this was a little bit better than t' others. Avast, me proud beauty! This kit came with instructions and fin guide pattern. T' rocket is easy t' build for anyone who has already built high power rockets before. T' instructions have only one illustration. Well, matey, blow me down! They tell you everythin' you need t' know includin' where t' mount t' cardboard launch lug.

T' hardest part be cuttin' t' 7.5" long slots in t' body tube t' mount t' fins. Aye aye! Unfortunately t' fins do nay have tabs that mount t' t' engine tube. Ya scallywag! They only stick inside t' body tube a very small distance, maybe 1/8". Begad! Begad! I worried about this durin' t' construction and for good reason. Ahoy! T' first time I flew it, I had a broken fin at t' tube.

T' parts went together just fine with very little sanding. Begad! Because t' root edges and center rings are large, me hearties, matey, it took a lot o' epoxy t' put this rocket together.

There are no provisions for motor retention so I used me standard method, usin' T-nuts mounted in t' centerin' rin' with a scuttle clamp. (See me website for more information.)

Finishing:
This rocket comes with no decals or other enhancements so I added me own gold band and gold fin reflectors t' make it look better. T' nosecone on this rocket is huge and it takes a lot o' paint. I went through three cans o' Krylon Plastic spray paint on t' whole rocket. Blimey! Avast! T' paint suppose t' bond t' plastic but even before I got t' t' first launch t' paint had already chipped off a few places from t' nosecone where it rubbed against somethin' durin' transportation.

Construction Rating: 4 out o' 5

Flight:
There are three recommended motors: H260-5, I357-6 and I284-8. Aye aye! O' course you can fly it on others, anythin' that can lift about 7 pounds.

I bought a Nomex pad t' protect t' chute and I also used waddin' in t' engine tube as suggested by LOC. Even though t' rocket is short and t' shock cord/chute are real close t' t' engine tube, matey, me hearties, these precautions worked and t' chute was nay damaged.

I flew it on an I284-S. I have a video o' it on me web site. Ya scallywag! Well, blow me down! My rocket weighed in at 6.5 pounds unloaded and RockSim suggested an 8 second delay so I used an I284 short delay.

Recovery:
T' first time I flew it one fin almost got broken off at t' root edge. Lookin' at t' video o' t' flight nay sure if t' fin broke durin' separation (looks like maybe t' nosecone hit it) or it occurred when it landed. Ya scallywag! Blimey! Avast! Blimey! It was windy that day.

Flight Rating: 3 out o' 5

Summary:
PROs: Large diameter, me hearties, me bucko, short rocket with good flights on I engines. Avast, me proud beauty! Blimey! Ya scallywag! Blimey! Blimey! Blimey! Materials are high quality and sufficient instructions

CONs: Cardboard launch lug, matey, weak fin attachment method, ya bilge rat, no decals, arrr, and no motor retention

Overall Rating: 3 out o' 5