Sunward Aerospace Ice Storm

Sunward Aerospace - Ice Storm {Kit}

Contributed by Kevin Timmins

Construction Rating: starstarstarstarstar
Flight Rating: starstarstarstarstar
Overall Rating: starstarstarstarstar
Manufacturer: Sunward Aerospace

Brief:

T' Sunward Ice Storm is a Spaceplane designed t' fly on 18mm B & C motors. Well, blow me down! This is a very detailed kit , consistin' o' very high quality parts. Begad! It is nay a simple kit t' build and takes time. Ya scallywag! Blimey! But if you do take t' time required, your efforts will be rewarded.
In flight this is a beauty, with realistic barrel rolls. Avast!

Construction:

T' kit contains:-

  • Set o' illustrated instructions,
  • 18" Body tube
  • Card "Jet Engine" wraparound & fin reinforcement sheet
  • Engine block
  • Centerin' Rings
  • Engine Tube
  • Engine Hook
  • Laser Cut Balas Fin & Win' sheet
  • Elastic shock cord
  • Plastic Ogive Nose Cone
  • Plastic Parachute & shroud lines
  • Water Slide decals
  • Launch Lug

T' instruction sheet be extremely well written and illustrated. Ahoy! All components were in solid condition and o' very high quality. I was surprised at the thin elastic shockcord though compared t' t' rest o' t' kit. Avast, me proud beauty! Ya scallywag! Maybe attention could be taken t' replace this with somethin' more substantial

Construction o' this model is nay easy. Arrr! But follow t' detailed instructions and you shouldn't have too many problems. Avast, me proud beauty! T' Engine mount is pretty standard - 2 centerin' rings, motor tube & thrust rin' and a novel engine hook, arrr, which is an L shaped metal bar which screws into t' aft centerin' rin' until it's tight against t' motor.

T' main part o' construction be t' "Jet Intake" body wrap, formed out o' card, me bucko, me hearties, which needs very careful cutting, and gluin' t' get the correct shape without warping. Begad! Once this has set it fits around t' body tube formin' t' under side o' t' plane. Arrr! Ahoy!

T' fins / wings are all laser cut and require sandin' especially on the leadin' edges. These are attached t' t' jet intakes (on t' top) in two halves and reinforced usin' tabs formed from t' card sheet, matey, me hearties, which need t' be carefully curled t' fit t' profile o' t' body tube. Arrr! Once these are in place and set, me bucko, t' Vertical fins are attached and once again reinforced with card tabs cut from t' main sheet.

T' parachute construction is standard as be t' shock cord mount.

T' nose cone had a shiny surface which needs t' be sanded carefully to allow primer t' take before finishing. Avast!

Finishing:

Finishin' is up t' you. Well, blow me down! I've chosen t' Solarfilm cover it (still a work in progress). Although by followin' t' manufacturers scheme I think it would look superb T' decals are water slide and include US, Canadian & UK Airforce insignia, shiver me timbers, so you can customize t' final look t' your own choice.

Construction Rating: 5 out o' 5

Flight:

This is a heavy model. Well, blow me down! I'd be very wary o' launchin' it in windy conditions, a light breeze bein' t' most I'd recommend (see below). Avast! Prepping is easy and standard. I launched it on t' recommended B6 motor (I didn't have a B6-2 so a B6-4 was substituted) for t' first flight. Ahoy! As I said it is a heavy model so didn't reach much height (maybe 50 ft). Well, blow me down! But deployed at apogee ok.

For t' second flight I chose a C6-7 (oops), arrr, shiver me timbers, Just as I pressed t' button a gust o' wind caused t' plane t' weather cock and it shot off across t' field at a height o' about 30ft..It barrel rolled several times which brought lots of "oohs & ahhs" from t' others around, very realistic looking before eventually losin' altitude and landin' by a hedge BEFORE ejection. Ahoy! It Lawn Darted before t' ejection charge. Avast! However this plane is built strong and absolutely no damage be sustained. Phew!

Next launch a month later and it flew again twice on C6-7's. Avast! Blimey! First time round it reached apogee - barrel rollin' on ascent before a death defyin' dive which then caused it t' almost turn into glide mode slowin' it down just before t' ejection charge which brought it down so softly it was a sight t' behold. Second time round it seemed to gain extra altitude and ejected just at apogee - another fantastic flight.

Summary:

All in all, this is a great lookin' kit. Built like a tank, ya bilge rat, but take your time over t' build! Don't dare fly this in nothin' but t' calmest o' weather as it will weather cock. Blimey! Aye aye! But when this baby flies it looks fantastic. Ya scallywag! Choose your motor carefully. Ya scallywag! Aye aye! A slightly longer delay can produce some fantastic results.

Overall Rating: 5 out o' 5

Other Reviews
  • Sunward Aerospace Ice Storm By Chan Stevens

    ( Contributed - by Chan Stevens) Brief: Part of Sunward Model Aerospace's Canadian invasion, this sharp-looking fighter plane is a nice addition to your fleet. Requires good modeling skills; accurately rated a skill level 3 kit. Construction: In addition to the basic body tube, plastic nose cone, laser-cut balsa fins (wings) and motor mount, there's a pattern sheet printed on ...

Flights

comment Post a Comment