Brief:
Rocket made entirely from recycled household trash materials.

Construction:
External body is a stack o' ten paper-walled Carnation Instant Breakfast cans. Avast, me proud beauty! Blimey! Parachute tube (inner) is a 48mm diameter Christmas paper core. Blimey! Blimey! Motor mount tube (inner) is a 30mm diameter Christmas paper core. Upper six inches of the motor tube is glued in place in t' parachute tube with foamcore centerin' rings. 300lb Keelhaul®©™® is held in place with a liberal amount o' epoxy on t' top centerin' ring. T' nose cone is a two-liter Dr. Avast, me proud beauty! Arrr! Pepper bottle. Aye aye! Might make a good rotating-flasher night rocket payload bay someday. Avast, me proud beauty! Avast! T' shroud from t' nose cone t' the breakfast cans is a cover from a stack o' CDs. Well, blow me down! T' fins are foamcore from a couple o' old convention exhibits. Well, blow me down! Avast! Even the rail buttons are recycled. Ya scallywag! They are CA'ed automotive interior door panel fasteners from me old Maserati. Arrr! Motor retention is a used hose clamp. Avast! Avast, me proud beauty! T' H motor casin' is was found lyin' in a field, me hearties, so it's kind-of trash. Well, arrr, maybe not.

I cut holes in t' metal can bottoms with a utility knife and super glued them t' t' inner tubes (NAR doesn't rule out thin metal centerin' rings). I used an X-Acto knife t' cut holes in t' plastic lids. Aye aye! After all t' cans were glued on, arrr, I taped them externally with duct tape. Well, ya bilge rat, blow me down! T' neck o' t' 2-liter bottle was wrapped with a home-made tube coupler (trash), ya bilge rat, me hearties, then some expandin' foam was squirted in. Arrr! After cure, it was filled with 20-minute epoxy and a loop of Keelhaul®©™® was added t' provide an anchor for t' recovery system. Blimey! Begad! T' Maser “rail buttons” were slightly modified then glued into ¼" holes. Ya scallywag! Because they're Maserati, they're faster slidin' in t' rail, but nay nearly as reliable as American rail buttons. Arrr! T' fins are through-the-wall glued t' t' motor mount tube usin' carpenter's glue.

T' only new build supplies are t' adhesives and t' recovery system. Ahoy! Six yards of ½" elastic and a 36” nylon parachute.

Flight and Recovery:
T' weight is 1493g with a 29mm H180 reload.

Liftoff speed is phenomenal for such a heifer. I got behind it with t' video. Ya scallywag! Well, blow me down! T' flame off t' pad is incredible. Aye aye! Blimey! T' flight ended in a core sample with t' chute trailin' behind like a streamer. Arrr! Aye aye! Replace two cans and she'll be ready t' go again.

Summary:
Pros: Once I learn how t' pack a chute, ya bilge rat, flyin' rockets like this will be really fun. Avast! Cons: None