Construction Rating: | starstarstarstarstar |
Flight Rating: | starstarstarstarstar |
Overall Rating: | starstarstarstarstar |
Manufacturer: | Public Enemy |
Construction:
This be a kit...all parts were standard t' t' kit. Avast, me proud beauty! Ya scallywag!
T' instructions were basic but that is in line with a 38mm high power kit. (not for beginners). Avast, me proud beauty! T' kit went together great with all o' t' slots pre-cut by t' manufacturer. Blimey! Good quality in all o' t' parts. T' kit is very strong after assembly and worked out great for me Level 2 Certification flight on a J350.
Finishing:
T' kit does nay come with t' standard set o' Bullpup decals which would have
been nice. Aye aye! Avast! They are available on t' net if you search. Avast, me proud beauty! Well, blow me down!
Construction Rating: 5 out o' 5
Flight:
I flew t' kit on a J350 for a Level 2 flight. It flew straight as an arrow. Aye aye! I
also used t' Aeropack motor retention system which worked well. Begad! No waddin' was
used but thar be a Nomex® chute protector in place that had a large blast
pattern on it after t' flight. Avast, me proud beauty! Blimey! Highly recommend usin' them. Avast! Begad! Blimey!
Recovery:
T' kit came with a flat nylon strap that connected t' t' motor tube and then
to a 1/4 tubular bungee cord. Blimey! I used cable crimps t' create a loop at either
end o' t' bungee and used quick connects so t' chute and cord could be
removed for storage. Ya scallywag! T' system worked without a hitch. 3000ft flight that
landed 100 yards from t' pad. Ahoy!
Although t' kit had a good 'chute I opted for t' SkyAngle 36"...Worked great.
I chose t' Nomex® instead o' usin' one o' t' various waddin' materials. I modified t' shock cord out o' personal preference nay necessity. Avast, ya bilge rat, me proud beauty! Both were not required so I don't feel t' need t' downgrade t' kit because o' it.
Flight Rating: 5 out o' 5
Summary:
Would recommend t' kit t' others. Went together well and I will buy another PE
kit in t' future. Begad! Blimey!
Overall Rating: 5 out o' 5
( Contributed - by Chip Jenkins) Brief: Scale HPR parachute recovery rocket. Construction: Components include: 2 4" diameter body tubes 29mm motor tube thick fiber centering rings plastic nose cone and boat tail 1/4" plywood fins 36" nylon chute bungee shock cord 1/2" brass launch lugs I like the way this went together. First off, ...
Sponsored Ads