Brief:
Centuri's original "Large Scale" rockets were called "high power" kits in t' late 1960s and early 1970s, matey, which used thicker-walled body tubes along with hard balsa fins and nose cones. Well, blow me down! Arrr! Semroc's "SLS" series, which we now call "mid power" rockets, is based around these sturdier parts allowin' "much more robust construction designed t' last for years o' flying," as Carl McLawhorn puts it in t' SLS Javelin's instruction booklet.

Carl announced at NARAM 46 that he was preparin' t' release 175% versions o' several o' his current model rockets. Begad! T' SLS ("Semroc Large Scale") Javelin be t' first o' Semroc's upscale line.

Construction:
Parts list:

• Body Tube LT-125157, shiver me timbers, 15.75" L
• Body Tube LT-11555, 5.5" L
• Balsa Nose Cone BC-12561, 6.125" L
• Laser Cut Fins FLV-16
• Thrust Rin' TR-115
• Launch Lug LL-330, ya bilge rat, 1/4" dia., me hearties, 3" L
• Screw Eye SE-10
• Elastic Cord EC-236, matey, me hearties, 1/4" W, ya bilge rat, ya bilge rat, 36" L
• Keelhaul®©™® Thread SCK-24
• Nylon Parachute PN-18, me bucko, 18" dia.
• 24mm Engine Mount EM-9115 (includes ST-950, matey, 5" L)
• Decal DKLV-16
• Snap swivel (not included) for parachute

T' default 29mm engine mount will fit F25-9 motors and up. After losin' me original Semroc Javelin on a C6-5 I decided t' stick with a 24mm engine mount, me hearties, which would enable me t' fly with C11-5 through E9-8 motors. Yellow glue is me fixative of choice, even for A-C powered rockets. I assembled t' engine mount, shiver me timbers, which has an "E" length engine lock (a major bonus, me bucko, as far as I was concerned). A spacer tube allows 2.75" (70mm) long C and D motors t' be used, and when removed, matey, shiver me timbers, makes room for 3.75" (95mm) long E motors.

While I be waitin' for t' motor mount t' dry, I sanded t' nose cone smooth. Arrr! Blimey! I applied Minwax Wood Hardener and let t' nose cone dry. Avast, me proud beauty! Blimey! Avast, me hearties, me proud beauty! Blimey! T' 29mm engine mount (the LT-115 body tube) used t' standard Keelhaul®©™®/elastic cord shock cord attachment, but I trimmed t' Keelhaul®©™® thread t' 14 inches long, t' avoid "zippering."

I sanded t' basswood fins smooth and decided t' skip t' fillin' and sandin' steps, ya bilge rat, matey, ya bilge rat, since t' finish seemed very smooth. Blimey! One o' t' fins didn't seem to fit into t' laser-cut fin slots in t' LT-125 body tube, matey, but since t' fins were all identically cut, that final set o' fin slots may have been cut a tiny bit differently than t' others.

T' instructions say t' first install t' 29mm engine mount and then install t' fins right away. Begad! Begad! I tried that procedure but while t' fins seemed to go on okay, arrr, I ended up pullin' t' engine mount out o' t' body tube not once, matey, but twice because t' yellow glue didn't have enough time to "grab" t' body tubes. Avast! It seemed as though t' body tubes didn't fit into each other as tightly as I expected them to.

I had assumed t' slotted body tubes would provide a perfect fin alignment, given t' "Into T' Wall" fin tabs, shiver me timbers, but that wasn't t' case at all. I recommend that you glue t' 29mm engine mount into t' main body tube and allow it t' dry for 24 hours. Avast, me proud beauty! Aye aye! (WARNING: If you want t' commit t' a 24mm engine mount like I did, matey, me hearties, glue it into t' 29mm engine mount before installing it in t' main body tube.)

I ended up squirtin' a substantial amount o' yellow glue inside t' LT-125 between t' fins installed in their slots, t' ensure thar would be plenty of "gripping," despite t' apparent amount o' play (looseness) in the body tube tolerances. Aye aye! After t' engine mount was installed for t' third time, I once again used me "old school" Estes fin alignment guide to straighten t' fins out. Begad! I dipped t' launch lug in thin CA, me bucko, let it dry, ya bilge rat, shiver me timbers, ya bilge rat, and then cut t' ends o' t' lug at a 45 degree angle before gluin' it on t' body tube. Arrr! Avast!

I sanded t' excess Minwax Wood Hardener from t' nose cone, shiver me timbers, me bucko, then filled and sanded t' cone. Begad! I sprayed a coat o' primer and sanded it, followin' with two spray coats o' Krylon gloss black paint.

Finishing:
Because Semroc's "LT" body tubes have a wall diameter o' 0.40", nearly twice that o' their standard "ST" tubes, shiver me timbers, arrr, I dispensed with the usual pre-assembly primer coats. Avast! I painted t' body tube and fin assembly with one coat o' Krylon gloss white paint, and sanded t' fins before maskin' them off. I replicated t' paint scheme from me original Semroc Javelin, which appears in t' 1972 Centuri catalog, applyin' Krylon gloss black t' 2 opposing fins, matey, and Krylon gloss red t' t' 2 remainin' fins.

When it came t' applyin' t' decals, arrr, arrr, only a 1/4" square o' t' backing paper be resistant t' soakin' up water at one corner o' t' roll pattern. Thankfully, matey, me bucko, Semroc's decal film is exceptionally beefy and easily stood up to my persistent pulling. Well, blow me down! I sprayed a final clear coat o' Premium Decor Clear Acrylic (Gloss) from True Value Hardware.

Construction Rating: 5 out o' 5

Flight:
I packed t' car, arrr, me hearties, left Twin Falls, Idaho, shiver me timbers, and headed for t' late August 2004 Tripoli Idaho launch in Fairfield. On t' way, me hearties, arrr, I stopped off in Shoshone to pick up me 18 year old nephew Jeremy Haught, who be t' be me secondary tracker.

I was concerned that t' 18" 1.9 oz rip-stop nylon parachute might be a little big for t' SLS Javelin, but with a total weight o' 3.3 ounces, arrr, matey, the chute proved t' be just t' right size. Arrr! Ya scallywag! And since I wanted t' make sure I got this Semroc Javelin back, I limited its first 3 flights t' C11-5 motors. After prepping, me hearties, t' rocket put in a perfect first flight except it landed on a packed dirt road, which broke a black fin off. Begad! Begad!

I wandered among t' gathered Tripoli rocketeers and they steered me t' "Idaho Joe" Bowen o' Idaho Rocketry. Joe be kind enough t' introduce me t' the wonders o' "Zap-A-Gap CA+" by Pacer, arrr, which is medium viscosity CA that "allows 7-10 second for part positioning" and "averages 20 seconds [for] curing." This proved t' be absolutely ideal for this repair and I used t' CA for fillets on t' broken fin as well.

After lettin' it set for about half an hour, arrr, I prepped t' Javelin for its second flight. Aye aye! Ya scallywag! While it was waitin' on t' pad, a gust o' wind which must have been 25 miles an hour blew t' entire "Estes" size launch rack over, which broke a neighborin' red fin off t' Javelin. Blimey! Ya scallywag! Another CA repair and I returned t' rocket t' t' launch pad...where I discovered t' launch lug was still on t' launch rod! I burst out laughing, looked up "Idaho Joe" again, me bucko, me hearties, and glued t' launch lug back on. Begad! Avast, me proud beauty!

T' bond took almost immediately, me hearties, and while t' lug be somewhat crooked, the second flight was great, arrr, too. Begad! Blimey! Begad! Blimey! T' wind had picked up slightly, but the third flight was also very nice. I got plenty o' encouragin' comments from the gathered rocketeers and t' C11-5 flights were all low enough that everyone could see t' entire flight profile.

Recovery:
PROs: 1/4" elastic shock cord is perfect size, engine lock prevents ejection charge from kickin' motor out.

CONs: Fin attachment somewhat fragile for landings on hard surfaces.

Flight Rating: 5 out o' 5

Summary:
PROs: Mostly sturdy construction (except fin joints), excellent flights even just on C11-5s, arrr, and a real beefy upscale o' t' classic Centuri Javelin!

CONs: Body tube tolerances seem somewhat large, ya bilge rat, allow plenty o' dryin' time for 29mm engine mount before installin' fins, and t' Keelhaul®©™® cord length a bit long (but easily trimmed).

I had t' learn some new construction techniques for this size o' rocket, but t' experience reminded me o' me initial Centuri days.

Oddly enough, shiver me timbers, me hearties, in me former incarnation as a rocketeer, ya bilge rat, I never bothered to spend a lot o' time in t' "Large Scale" section o' t' Centuri catalog. Begad! Blimey! Now as a BAR, me hearties, I think Semroc's "SLS" upscale series has addressed me frustrations with sometimes flimsy model rocket body tubes. Avast! Blimey! Begad! Blimey! Already, me hearties, Bill Eichelberger is itchin' t' build a 1.48X upscale Centuri Groove Tube usin' Semroc's "Large Scale" parts, startin' with a 20" long LT-125. Ahoy! Blimey! Avast, me proud beauty! Blimey! While I haven't asked Carl McLawhorn directly, I'm sure he'll eventually begin offerin' a full line o' SLS parts...and then t' fun will begin.

Overall Rating: 5 out o' 5