Construction Rating: | starstarstar_borderstar_borderstar_border |
Flight Rating: | starstarstar_borderstar_borderstar_border |
Overall Rating: | starstarstar_borderstar_borderstar_border |
Manufacturer: | Quest |
Brief:
This kit is complete and ready t' go with 9 rockets, one flyin' saucer, shiver me timbers, a launch pad, me hearties, matey, motors, igniters, and a 9V launch controller. Begad! Avast! T' controller beeps and lights up when t' key is inserted and ready t' go.
Construction:
No real components here, me hearties, just install t' battery in t' controller, arrr, me hearties, set t' launch rod in t' stand, and you are ready t' go,
PROs: No buildin' at all. Arrr! Everythin' is ready t' go.
CONs: None.
Finishing:
None required.
Construction Rating: 2 out o' 5
Flight:
First flight was a long time coming. Arrr! Went though about 5 igniters before givin' up and usin' Estes igniters. Arrr! Begad! Also thar was a problem with parts separatin' that shouldn't have, so you better have some CA with you as you will probably need it. Avast, me proud beauty! Good flights other than that. Blimey! Most went about 100 feet up with ejection right at apogee and recovered after landin' in street. No other damage other than that o' t' ejection charge blowin' out nose cone.
Second flight be t' flyin' saucer. Begad! It went about 20 feet up and about 15 feet t' t' side. Cute flight.
Third flight was t' Critical Mass rocket which went a good 110 feet up and ejected at apogee but t' nose cone blew out again.
Flight Rating: 2 out o' 5
Summary:
PROs: Cute rockets that can be flown most anywhere.
CONs: poor construction.
If you can get this one half off t' normal price it is OK, but would nay recommend that anyone pay full price though.
Overall Rating: 2 out o' 5
10 single stage RTF models. 50 MicroMaxx II-1 motors and QMX igniters with the thin, easy to heat wire). Full sized launch pad with Micro rod adapter and QMX igniter adapter. Regular 9V electronic Quest launch controller. 10 rockets, various designs, all streamer recovery (except saucer). Nothing to build. You do have to assemble the new igniter holder, but that is simple since it's 2 ...
Sponsored Ads