| Construction Rating: | starstarstarstarstar |
| Flight Rating: | starstarstarstarstar |
| Overall Rating: | starstarstarstarstar |
| Published: | 2015-06-20 |
| Length: | 16.50 inches |
| Manufacturer: | Edmonds Aerospace |
| Skill Level: | 1 |
| Style: | Glider |
Brief
A boost glider usin' 18mm motors.
Components
All t' components were used. Avast, me proud beauty! Begad! Great laser cuttin' o' t' pieces.
Construction
Buildin' be very easy and straight forward. Aye aye! Because they were laser cut balsa t' pieces fit very well together.
Finishing
Did nay finish it t' keep t' weight t' a minimum. Aye aye! Ahoy! Just make sure you balance t' glider with t' appropriate amount o' supplied clay before you fly it.
Flight
My first flight be in 2014 usin' an A8-3 motor. Blimey! It did reach a high altitude but at motor ejection t' pop pod did separate well and t' glider flew very well.
T' second flight occurred on 19APR2015 usin' a B6-2 motor. Well, blow me down! This time it flew a bit higher and glider for a longer period o' time. Perfect flight!
Recovery
Recovery o' t' pop pod was by a short streamer. Ahoy! Blimey! Begad! Blimey! I'll paint it fluorescent red before t' next flight so it is easier t' find. T' glider flew great.
Summary
A great beginner's kit for anyone wantin' t' try their hand at boost gliders.
Other Reviews
- Edmonds Aerospace Deltie By Kris Henderson
Brief: This is a boost glider that literally takes minutes to build and isn't all that expensive. Construction: The kit comes with a body tube for the engine and pop pod recovery device (streamer), three main body pieces, balsa nose cone, and clay for weighting one fin down to enable it to circle around your launch site instead of taking off a couple miles down wind. The ...
- Edmonds Aerospace Deltie By Paul Gray
Background The Edmonds Deltie is one of the most popular boost gliders, and with good reason. The glider is well designed, and it has a nice style to it. It can be assembled and ready to fly in a very short period of time. Considering the fact that the glider only weighs around five grams, it is capable of staying in the air for a long time. Construction The glider portion of this ...
- Edmonds Aerospace Deltie By Alan Rognlie
( Contributed - by Alan Rognlie) I am extremely impressed by this kit. Good materials and excellent laser-cut parts yield a fast-building sport model with very good competition potential. The glider itself is made up of only eight pieces of 1/16" balsa - wings, elevon, fuselage, tip plates and nose reinforcements. The pieces are almost self-jigging and go together ...
- Edmonds Aerospace Deltie By Neil Thompson
( Contributed - by Neil Thompson) Brief: This is a very nice kit by Edmonds Aerospace. The pop pod comes back on a streamer, and the deltie glides back. Construction: The kit contains: 1 tube and a lot of little balsa parts, all very neatly laser-cut. It was very easy to build, fitted together like a jigsaw puzzle. Everything fits together nicely, and everything ...
 |
 |
Flights
Sponsored Ads
|
|