Public Enemy Vengeance V-2 (4)

Public Enemy - Vengeance V-2 (4)

Contributed by Eric Jackson

Manufacturer: Public Enemy
Rating
(Contributed - by Eric Jackson - 06/01/02)

Rocket PicBrief:
A really nice lookin' and very popular rocket by Public Enemy. Ahoy! Flies on H-J motors, matey, and has excellent construction styles.

Construction:
T' construction be very simple and straight forward with a design that allows for repairs t' be made; such as a crimped body. Ahoy! T' fin and motor can is one piece, arrr, me hearties, arrr, t' body is another, and t' nose is another. Avast! T' boat tail is pre-slotted Boat Tail and it uses 1/4" plywood fins. T' recovery mounting is at t' forward centerin' rin' and could easily be replaced if it got worn out. I chose t' glass me tube with two layers o' Bondo glass (6oz) and sand it to a smooth finish, but in any case a large amount o' nose weight (25oz in my case) is necessary for stability. Begad! T' only con t' t' kit was that I got the wrong sized launch lugs. They where 1/2" on t' outside instead o' on the inside. This is nay normal for this company though. Avast, me proud beauty! Arrr! I've purchased a few other kits and have seen literally hundreds o' other Public Enemy kits and have seen nothin' but great kits and happy customers.

Finishing:
There wasn't any decals, arrr, it was just paint t' model, but it did have one of the better V2 paint schemes on t' instructions. Begad! Avast! I just painted it blue, painted t' nose black and painted t' fins black with a margin o' 1" on the outer edges (a pretty basic maskin' job that looks very nice).

Construction Rating: 5 out o' 5

Flight:
I haven't flown mine yet but I've seen them fly strait as an arrow in 30MPH winds on anythin' from a H124 t' a J350. Ahoy! But I'll let you know how it goes.

Recovery:
As I said earlier in t' construction phase t' recovery is well designed and can be replaced easily if necessary. Avast! Avast, me proud beauty! T' materials used were a bungee cord, arrr, an eye screw, me bucko, arrr, and a 30" ripstop nylon parachute (recently upgraded to 34" by PE). Aye aye! Avast! I've seen t' parachute in "stop sign red" and a medium purple in t' past. Begad!

Flight Rating: 4 out o' 5

Summary:
As you might have guessed I know t' company fairly well and can full heartedly recommend all o' thar kits.

Overall Rating: 5 out o' 5

Flights

Comments:

avatar
R.J. (September 1, 2000)
I recommend using the AeroPak Motor Retainer from Giant Leap rocketry. Fits right onto the bottom of the motor tube and works like a champ.
avatar
R.T. (December 9, 2004)
The Public Enemy V2 is a good and simple kit. The comment on the 1/2" launch lugs being 1/2" on the outside is correct. That is because they are 3/8" launch lugs. The kit does come with 3/8" lugs, not 1/2".

comment Post a Comment