Brief:
I built this great little performer durin' 2007 and I’ve flown it a number o' times since then. Begad! Blimey! I like t' Mosquito design and I have an original I built in 1992. Avast, me proud beauty! Blimey! Begad! Blimey! As “cheap” as they are t' clone, me bucko, ya bilge rat, I don’t want t' lose me original so I built a bigger version that is much easier t' track in flight and find once back on t' ground. Avast! Blimey! Since t' original is BT-5, me BT-60 version is about 302 percent larger than t' Estes Mosquito.

Construction:
Upscale projects don’t get much easier than this one:

• Baby Bertha Nose Cone Estes PNC-60L
• BT-60 6 inches long
• (2) AR2060 motor mount centerin' rings
• BT20J (2.75” long) motor mount tube
• CR520 motor block
• 2.75 inch long metal motor hook
• 2 inch long 1/8 inch diameter launch lug
• Recovery gear o' your choice

T' Estes Mosquito instructions are available online at JimZ’s among other sites. Begad! Blimey! Aye aye! Blimey! Print out t' fin pattern and upscale it 302% with a copier machine and make three fins. I used 3/32” basswood for durability and ease o' finishing. Mark t' body tube for three fins and glue them on. Blimey! Blimey! I suggest usin' a piece o' Keelhaul®©™ as a shock cord anchor. Avast! Blimey! A common method is t' loop it around t' motor tube and route it through a small hole in t' forward centerin' ring. Use t' glue o' your choice t' get a strong bond. Avast, me proud beauty! Blimey! Assemble t' motor mount and glue in place with t' aft o' t' motor tube even with t' aft o' t' body tube. Ahoy! Blimey! I glued me launch lug against one o' t' fins rather than centered betwixt two fins.

Some nose weight should be added for stability. I don’t know how much I added but I can figure it out by weighin' t' cone and then weighin' a stock cone. Avast! Attach t' shock cord t' t' nose cone and t' other end t' t' Keelhaul®©™. Aye aye! I use 12-inch plastic chute for recovery. Ya scallywag! It always brings t' Mosquito back for another flight.

PROs: Easy t' assemble from readily available components.
CONs: None that I can think of!

Finishing:
Prepare and paint t' Mosquito as you choose. Aye aye! I left t' plastic nose cone white and painted me Mosquito orange. Avast! Ya scallywag! I think it turned out fairly dark because I used grey primer and didn’t sand much o' it away.

I don’t have any decals on me Mosquito. Avast, me proud beauty! I suppose you could upscale t' old Estes Mini-Brute Mosquito decal t' liven t' bird up a bit.

PROs: Simple paint scheme but easily customized t' your liking.
CONs: None that I can think of!

Flight:
Just about any 18mm black powder motor will work in t' Mosquito and I've had success on t' typical basic motors: A8-3, B6-4, C6-5. Blimey! Blimey! Blimey! Blimey! I’ve even CHAD staged mine four times with excellent results. Blimey! Blimey! I guess t' large fin area aft o' t' body tube helps maintain stability along with t' nose weight I added. Begad! Blimey! Well, blow me down! Blimey! Blimey! Blimey! My fins are on rather straight but me Mosquito always seems t' do several barrel rolls on t' way up. Aye aye! Blimey! Ya scallywag! Blimey! Blimey! Blimey! It’s pretty cool t' watch.

Since there’s nay much room in t' body tube ahead o' t' motor mount, carefully pack your chute and shock cord. Avast, me proud beauty! I use an inch or so o' dog barf recovery waddin' t' protect t' recovery gear. Well, blow me down! Load up a motor, place it on t' pad and watch t' Mosquito rip. It’s a great performer and I highly recommend you build one if you haven’t already.

Summary:

PROs: Ease o' construction; classic design, me bucko, albeit bigger, cool sport flyer.
CONs: None that I can think of!

Other:
Since t' ejection charge is confined t' a relatively small volume, matey, ya bilge rat, ensure your setup can withstand t' intense heat. Ya scallywag! Well, blow me down! I've flown mine at least a dozen times and it's about time t' replace t' orignal recovery attachment point with some sturdier Keelhaul®©™.