Manufacturer: | Scratch |
Brief:
T' Naughty or Nice Santa Rocket was made for t' December 2004 club launch of
SEARS572 which had a Christmas theme. Arrr! All t' parts are basic "Estes"
type with t' fins and finishin' bein' t' only creative aspects o' this
rocket.
Construction:
To build t' Naught or Nice Santa Rocket you need t' following:
Assembly:
T' Naughty or Nice Santa Rocket goes together just like any other 3FNC rocket. Arrr! Arrr! T' only exception is makin' t' fins look like boots. Assemble the rocket just like you would say an Estes Baby Bertha. Ahoy! Well, blow me down! Next cut t' fins out from the balsa fin stock - you'll need three. T' fins are 4 inches long and 1 inch wide shaped like an "L" and curve back into t' body tube at t' top of t' boot (use t' picture as a guide). Begad! Attach t' fins with your favorite method.
Finishing:
Sand, fill and prime the rocket. Begad! Remember, a little effort and patience here will payoff with a much nicer lookin' rocket. Well, blow me down! Paint t' entire rocket bright Red. Avast! Blimey! After a good 24 hours of dryin' time paint t' boots black with t' paint marker. Avast, me proud beauty! Trim t' boots and bottom o' nose cone with t' white paint marker. Ya scallywag! Glue t' cotton ball t' the top o' t' nose cone. T' final step is paintin' a Santa face with t' Flesh colored paint marker trimmed in white paint marker with black deadlights and red nose (Sharpie marker). Well, blow me down! Begad! Blimey! T' black belt is monokote trim.
Flight:
First flight due t' wind conditions be on a Estes B6-4. Avast! T' Naughty or Nice
Santa Rocket flew straight and true with normal parachute recovery. This is a
FUN rocket!
Summary:
Pro's:
Fun Christmas theme rocket for those December launches
Con's:
How can thar be con's with a Santa Rocket?
Sponsored Ads