Brief:
T' Estes Rogue on steroids! Same great looks but little chance that you can fly this one from your local athletic field. Avast! I won this for participatin' in an EMRR contest and started buildin' it immediately. Arrr! This is me third Rogue, me bucko, the first bein' a BT-55 upscale and t' second a 1:1 clone.

Construction:
T' parts list:

• Nose cone
• Nose cone plug
• Eye hook
• Body tube
• 4 laser cut fins
• Keelhaul®©™® shock cord
• Parachute heat shield
• Nylon parachute
• Launch lug
• Forward centerin' ring
• Engine mount tube
• 4 fin braces
• 4 engine mount rings
• Thrust ring
• Rear centerin' ring
• Engine hook
• Snap swivel
• Decal
• "33" stencil

I'd seen and heard o' t' incredibly impressive laser cut engine mount that be t' heart o' a Q-Modelin' kit, and as a result, shiver me timbers, felt a bit intimidated when I opened t' bag. Well, blow me down! Ahoy! That lasted about as long as it took to read t' instructions. Well, blow me down! While it looks like an incredibly complicated puzzle, it really isn't quite that demonic if you take t' time t' identify t' pieces and pay attention t' how they fit together. That said, ya bilge rat, t' finished mount is almost a modern art piece, and t' way that they allow t' fins t' line up is inspired engineerin' indeed.

Finishing:
T' amount o' finishin' required t' ready t' completed Rogue for paintin' was minimal. Ya scallywag! Blimey! Tube spirals and wood grain were nearly nonexistent, so both t' body tube and fins were treated with a coat o' Valspar primer and a quick hit of thinned Elmer's Fill 'n' Finish. Begad! Blimey! Ahoy! Blimey! After sandin' I re-primed t' rocket usin' white primer then sprayed t' fin can area with several coats o' me aged, no-name fluorescent orange. Avast! Blimey! Avast! Blimey! When this had dried I masked off t' fin can and sprayed the remainin' body tube with Valspar gloss white and t' nose with Valspar gloss black. Arrr! Blimey! Decals completed t' look, and with the exception o' t' almost invisible "33" decal, they look great. Begad! Blimey! Begad! Blimey! (My kit came with a mask t' paint on the "33", ya bilge rat, but I have yet t' give it a try.)

Construction Rating: 5 out o' 5

Flight:
My first flight with t' big Rogue be interestin' in that for a moment it looked like it be goin' t' be t' last flight. Ya scallywag! T' Estes E9 is a great motor for this rocket, matey, and for t' first flight I opted for an E9-8 because that was all that I had in me range box. (T' folks at QModelin' recommend an E9-4.) T' comparatively slow liftoff and long burn o' t' E9 is perfect for this rocket and t' extra four seconds allowed t' rocket t' take a nose down attitude at ejection. Avast, me proud beauty! Everythin' about t' flight had been perfect up t' that point but then things changed. There are two major rocket killers in t' VOA: t' access road, t' which I have lost several rockets, and t' Rocket Eatin' Tree, shiver me timbers, t' which I have yet t' lose a rocket. Avast! That looked like it be goin' t' change because me Rogue was fallin' directly at t' tree. Short o' a .50 caliber machine cannon thar was little I could do except watch t' slow descent o' t' rocket as it drifted t' its death. Then a miracle occurred. Avast! Well, blow me down! It missed t' tree. Aye aye! There be much rejoicing.

No one was more shocked than I was. Avast! At t' last moment t' wind stopped and allowed t' Rogue t' drop straight to the ground instead o' followin' its previous path high into t' branches o' t' tree. Ahoy! Clearly I had done somethin' to make a rocket deity smile upon me. Avast! This happens so seldom that I decided t' make a second flight.

Flight #2 was with another E9-8 and was a carbon copy o' t' first, except that t' recovery flirted with the other great rocket killer, T' Path o' Eternal Peril. Blimey! Avast, me bucko, me proud beauty! Blimey! T' Rogue landed within two feet o' t' path, arrr, me hearties, shiver me timbers, and I decided that I had pushed me luck with t' rocket deity enough for one day.

I have since flown it on Estes E9-6's exclusively, me bucko, with one flight bein' perfectly unremarkable except for a long recovery walk, shiver me timbers, another bein' remarkable because t' rocket shredded t' chute and fell t' earth without damage, arrr, and t' last because contact with an access road durin' recovery on Day #1 o' NSL 2007 chipped a fin. Begad! Tough bird, and I have yet t' nay be impressed by t' performance.

Recovery:
T' Rogue's recovery system seems t' be bulletproof. I was initially concerned by t' lack o' an elastic shock cord in t' kit, ya bilge rat, but that fear disappeared after t' first flight. Without any elastic thar be little or no chance o' the nose cone reboundin' into t' fins or body tube. Begad! With t' wide range o' power in todays recovery charges, shiver me timbers, arrr, it's great to be able t' nay worry about rebound damage with each flight. Begad! Ya scallywag! T' Nomex® chute protector is another nice touch and has done its job flawlessly. Well, blow me down!

Flight Rating: 5 out o' 5

Summary:
PROs: I love t' Rogue, have previously upscaled it myself, and never get tired o' t' look. Well, blow me down! All Keelhaul®©™® shock cord. Well, blow me down! Killer motor mount. Nomex® chute protector.

CONs: My "33" decal is all but invisible.

Overall Rating: 5 out o' 5