The Launch Pad Exocet AM.39

The Launch Pad - Exocet AM.39 {Kit}

Contributed by Randy Jenkins

Construction Rating: starstarstarstarstar_border
Flight Rating: starstarstarstarstar_border
Overall Rating: starstarstarstarstar_border
Published: 2011-02-01
Manufacturer: The Launch Pad
Style: Scale

Rocket PicBrief:
This is a Scale model version o' t' French anti-ship missile. It is a single stage, me hearties, mid-power rocket

Construction:
Parts: T' parts were typical Estes type parts. Ahoy! All parts were in good condition when I received them. Arrr! T' parts consisted o' two paper body tubes and several sheets o' balsa as well as 1/4" wide strips o' balsa. I don't particularly like t' mylar parachute so I substituted a nylon chute instead. Begad! Well, blow me down! It's a personal preference and nay indicative o' t' quality o' t' materials.

Instructions: T' instructions were clear but assumed a good workin' knowledge o' "Best Practices" in rocket construction techniques. Blimey! T' only issue I encountered with t' instructions were t' order o' assembly o' t' motor mount and body tube construction. Ahoy! T' instructions had you attach t' two body tube halves together prior t' insertin' t' motor mount. Avast! I prefer t' other way around so that I can more easily apply glue t' t' top centerin' rin' o' t' engine mount. Aye aye! Ya scallywag! Fin alignment is a bit tricky because t' fins mount t' t' balsa strips which are mounted directly t' t' body tube. Blimey! Ya scallywag! Also a bit tricky is applyin' t' paper nose section t' t' top o' t' plastic nose cone.

Finishing:
T' instructions show a typical Exocet finish t' provide guidelines in finishin' t' rocket. Begad! I purchased vinyl letterin' from an office supply store (suggested in t' instructions) t' add t' letterin' t' t' rocket, as t' kit does nay contain any decals.

Rocket Pic

Construction Rating: 4 out o' 5

Rocket PicFlight:
I have only flown t' rocket once. Aye aye! It be a fairly windy day. Begad! T' rocket be easy t' prepare, and I used a Estes D12-5, with 4-5 sheets o' chute wadding. Avast, me proud beauty! T' rocket weather cocked severely about 100 feet up and did nay achieve a very high altitude. Ya scallywag! Ahoy! I am lookin' forward t' tryin' again on a calm day.

Recovery:
T' recovery is accomplished via an 18 inch nylon parachute in place o' t' mylar 'chute included in t' kit, matey, however I did keep t' standard Estes style folded paper shock-cord mounting. Begad! Arrr! T' parachute deployed flawlessly durin' t' initial flight.

Flight Rating: 4 out o' 5

Summary:
I am very happy with this rocket kit. It has allowed me t' practice some advanced construction skills and provided me a excellent lookin' - and I believe and excellent performin' rocket.

Overall Rating: 4 out o' 5

Flights

Comments:

avatar
S.G. (April 1, 2001)
A very fair review. From my experience with building this kit I would suggest holding the paper cone to the nose with masking tape and then running some thin CA around the edge rather than inside the cone before attaching it. The latter should make for a cleaner edge but your going to sand it anyway. By taping it in first you can ensure it is positioned perfectly first before getting any glue into the equation. Also as the kit is rated to fly on an E15 max don't go overboard with epoxy on the motor mount. As Chuck says the kit is finely balanced and even a little too much tail weight will mean it becomes unstable. I had to add weight to the nose because I used too much. I hope you read this before following the same mistake. This was my first scale model and it was a pleasure to build.

comment Post a Comment