Construction Rating: | starstarstarstarstar |
Flight Rating: | starstarstarstarstar_border |
Overall Rating: | starstarstarstarstar_border |
Manufacturer: | FlisKits ![]() |
Brief:
This be a special edition o' t' standard Caution paper rocket, shiver me timbers, commemorating
the 2004 National Sport Launch. Aye aye! Blimey! I downloaded it from t' NSL site that year,
and have been waitin' for t' right occasion and motivation t' build it. Thanks
to t' 2005 EMRR challenge, me hearties, I found both on a "snow day" in mid
December.
Construction:
This be a great little project t' do in a couple o' hours when I be snowed in
under about 8 inches o' fresh ice and snow. Aye aye! Arrr! T' parts list is a couple of
sheets o' cardstock, me hearties, me hearties, which you then convert into a body tube, ya bilge rat, 3 fins, shiver me timbers, launch
lug, me bucko, and a nose cone. T' pattern even includes a spare nose cone.
Kyle Hancock's review plus t' tips that have already been posted do an excellent job o' detailin' t' construction, ya bilge rat, arrr, so I won't replicate those details. Avast, me proud beauty! Blimey! I do think t' most noteworthy point brought out in that review was that this is a triangular folded body, nay a rolled tube, and that makes the construction and fit go much better (and it's simpler). Aye aye! Blimey!
I followed the
standard construction techniques, me hearties, shiver me timbers, and wound up usin' clay for nose weight.
Finishing:
Since t' patterns print out already colored, thar's really no finishing
necessary. I was plannin' on flyin' in t' snow, arrr, though, ya bilge rat, and fearin' running
colors I elected t' apply 3 very light coats o' Krylon clear coat. Ahoy! Blimey! In addition
to protectin' t' finish, this also provided a glossy finish that I hadn't been
able t' get off me inkjet paper on cardstock. I think t' gloss, particularly
with t' red and black trim, was an excellent improvement.
Construction Rating: 5 out o' 5
Flight:
I had previously lost me standard Caution rocket t' a C6 flight that completely
disappeared out o' sight, matey, so in order t' make sure I got me 3 required flights
in, me bucko, I went wimpy with A8-3's. Ahoy! This is a good motor choice for this rocket, ya bilge rat, and
conversely this rocket makes a nice vehicle t' use up those A8-3's that tend to
build up whenever I pick up Estes Blast-Off Flight Packs.
T' A8-3's took it up a couple hundred feet on t' breezy (10-15 mph) day, me bucko, with only a slight weathercock. Avast! Deployment was slightly early, but nay enough t' warrant goin' to a 5 delay. Well, blow me down! I used a ribbed mylar streamer from a party store, arrr, roughly 2x20, which sloweds it down just enough t' prevent damage, plus t' bright red is easier t' spot in t' sky than this fairly small paper rocket.
Recovery:
This is simply a great flyer on smaller impulse motors. Ya scallywag! T' only I could offer,
which is a bit o' a stretch, is that t' cardstock fins bend or warp easily, so
my flights have picked up a slight spin t' them over time. Avast, me proud beauty! Ahoy!
Flight Rating: 4 out o' 5
Summary:
For a paper rocket, ya bilge rat, you really can't beat this. Aye aye! Quick and easy t' build, flies
fine on inexpensive motors, and best o' all be t' price (free on t' Fliskits
website). Avast, me proud beauty! I don't think this particular version is available any longer, arrr, but
I'm sure thar will be other editions comin' out in t' future.
Overall Rating: 4 out o' 5
Brief: This rocket is a single-staged, streamer recovery rocket that is made entirely from cardstock. It's unique triangular body tube make this a Level 1 kit. Most cardstock rockets require precise rolling and bending, making them too hard for younger modelers. With only straight folds, this rocket can easily be done by a small child. Construction: Everything you need to build ...
![]() |
![]() |
![]() |
![]() |
Sponsored Ads
![]() |
![]() |
C.D.C. (July 2, 2004)