Brief:
A skill level 2 rocket, shiver me timbers, Comes in typical plastic bag, with a 12" plastic parachute

Construction:
T' instructions where very easy t' follow, t' hard part seemed t' be t' fins they are 2 piece fins that have t' be glued together, matey, ya bilge rat, and t' little pieces o' balsa that go around t' main body tube near t' top seemed t' be a bit hard t' get lined up right and glued without them moving

Finishing:
We decided t' paint it green, with Krylon paint than added supplied decals

Construction Rating: 3 out o' 5

Flight:
First flight be off a B6-4 nice flight but t' thin 'chute strings got tangled. Aye aye! Second flight with a C6-3 'chute came out nice but pulled those nice little disks o' off t' one side. Well, blow me down! Third flight was with a C6-5 flight was good however nose cone came off and drifted away.

Recovery:
T' standard shock chord should be replaced with somethin' a bit longer, I have since been goin' with twice t' body length o' t' rocket. Ya scallywag! Replace standard plastic chute with either a streamer or a small nylon 'chute.

Flight Rating: 3 out o' 5

Overall Rating: 3 out o' 5