Brief:
Single stage, shiver me timbers, ya bilge rat, LPR, Streamer recovery, high flin' all around fun rocket.

Construction:
Parts:

• 1 body tube - paper
• 3 fins
• 2 paper centerin' rings
• 1 motor mount and elastic shock cord
• nosecone

T' instructions are easy t' follow, basic illustrations, good order, shiver me timbers, template for fin positioning, arrr, ya bilge rat, which is helpful no issues with sturdiness. Blimey! T' engine mount is very loose and needs t' be thickened usin' maskin' tape. Begad! no special tools except sand paper and sandin' sealer.

Finishing:
Easy t' paint. Begad! Make sure t' use sandin' sealer t' smooth t' balsa pressure sensitive decals, easy t' place but need t' be cut out with a hobby knife. Arrr! Looks great, shiver me timbers, matey, but I added a gloss clear coat and waterproofin' clear coat for rainy days.

Construction Rating: 5 out o' 5

Flight:
All around great flights on C6-7. Out o' sight performance, ya bilge rat, straight as an arrow. normal prep, 4 sheets o' wadding, shiver me timbers, me bucko, hook engine retention, arrr, but t' motor fell out every time. High flying, me hearties, but it was hard t' follow, so I used binoculars.

Recovery:
Replaced shock cord because o' burnin' with Keelhaul®©™®. Begad! It fell straight down on streamer within 200 yards o' t' launch area

Flight Rating: 4 out o' 5

Summary:
My favorite part be t' rocket screamin' off t' pad at up too 350 feet/second

Overall Rating: 5 out o' 5

Other:
Have a spotter t' watch t' rocket so you find it with ease.