Brief:
I gave t' rocket t' name #2 because it was me level 2 rocket. #2 is me first scratch built high power rocket and my first duel deploy rocket. Begad! Blimey! Except for t' booster bein' zipperles t' rocket was built usin' t' INFO central articles about duel deployment and anti zipper boosters for reference.

#2 uses two altimeters for flight control a Perfect Flight MAWD and a Missle Works R2CC. T' recovery sequence is a 18" drouge at apogee follwed by a backup charge two seconds and a 72" main at 400' with back up at 300'

Construction:
T' airframe is made o' LOC 3.9 tubing. Ya scallywag! T' booster airframe is 24" long and both t' drogue and payload sections are 17" long with a LOC avionics bay couplin' t' sections together. Well, blow me down! Ya scallywag!

#2 is a four fin rocket usin' 3/16 inch Baltic Birch for fins and t' three centerin' rings and bulkheads. Avast, me proud beauty! Blimey! The fins have t' edges framed with 1/8" carbon fiber tubin' t' add rigidity.

T' airframe was covered with two layers o' basalt sleeve from Soller Composites. Ya scallywag! Begad! West System epoxy and medium hardner was used for t' lamination

Finishing:
I chose basalt sleevin' for t' airframe because t' information said it was stronger and less expensive than fiberglass o' t' same weight. This might be true but t' basalt weave is very course and took two layers t' cover the tubing. thar was also a very heavy weave pattern that needed filling. Ahoy! I made a paste o' colloidal silica and epoxy that could be spread on t' tubin' fillin' most o' t' imperfections. I will nay use t' basalt sleeve again the fiberglass sleeve has a much finer weave and is easier t' work with. Arrr!

After fillin' and a couple coats o' primer #2 was painted with black Rustolium metallic spray paint. Ya scallywag! Ahoy! T' paint covers well and has a nice metal flake look. Begad!

Flight:
Motor choices are from t' larger I's through K's. T' 54mm motor is retained by a AeroPac retainer.

T' drogue parachute is protected with a 12"x12" Nomex® blanket and t' main parachute is positively deployed and protected by piston ejection.

T' maiden flight o' #2 be me Level 2 certification flight. Begad! Begad! Bein' me first high power scratch built I was very nervous about t' flight. T' rocket took off straight and went up and up now I was panicked about me first duel deployment. Blimey! I could see t' smoke from t' drogue event and was able t' track t' rocket on and off until t' main deployed. Aye aye! t' rocket landed within walkin' distance and I carried it back for a successful level 2 flight.

Recovery:
T' recovery harness uses 25' o' 1/4" Keelhaul®©™® rope from t' booster t' t' center section and 25' from t' center t' t' nose cone and is attached with quick links to ubolts. Avast, me proud beauty! T' ubolt on t' booster is coupled t' a piece o' allthread that is bolted through t' top motor mount. Blimey! the fiberglass nose cone has a 1/4" ubolt mounted t' a bulkhead that is epoxied inside t' shoulder. Ya scallywag! A 10' piece of 5/8 tubular nylon connects t' parachute t' t' nose cone

Summary:
PRO's

T' rocket flies nice and straight

T' rocket is super strong because o' t' extra layers o' basalt and epoxy

CON'S

T' rocket is very heavy because o' t' extra layers o' basalt and epoxy