Brief:
A single stage upscale o' t' Astron Streak usin' a Fat Boy nosecone, parachute, arrr, and engine mount components, me hearties, shiver me timbers, as well as a spare BT-80 tube and balsa fin stock.

Construction:
We used a BT-80 body tube I had from an assortment o' body tubes I got on eBay a while ago, cut t' 10-1/2 inch length. Begad! T' motor mount was stock from a Fat Boy kit, ya bilge rat, which had a crushed tube. Begad! T' nosecone was from t' same Fat Boy kit. We used t' standard Estes three fold shock cord mount (glued, matey, attached and coated with more glue), but replaced t' shock cord with elastic that was about twice as long.

Construction started with t' buildin' o' t' motor mount, which was simple and straight forward. I considered usin' somethin' larger than an 18mm motor mount, however, arrr, since this be t' be me daughter's rocket, we stayed with the standard mount. Avast, me proud beauty!

My daughter assembled all t' motor mount components and glue be applied to t' mount assembly and allowed t' dry before installin' it in t' rocket body. We then attached t' shock cord, arrr, usin' t' standard Estes 3-fold technique, but we used lots o' Tacky Glue in t' folds, me bucko, me hearties, attachin' t' mount to the body tube, ya bilge rat, and coatin' it after attachment.

I scaled t' fins up from me original fin template I had (from 1972!), transferred them t' t' balsa, arrr, and cut them out. We sanded and shot t' fins with primer, ya bilge rat, arrr, shiver me timbers, sanded again, me bucko, ya bilge rat, and tacked them t' t' body with Tacky Glue. Begad! Blimey! Aye aye! Blimey! This allowed me daughter t' line up and attach t' fins without t' time pressure of a CA. Avast, me proud beauty! Blimey! We then filleted heavily, usin' Tacky Glue again. Ya scallywag! Blimey! My daughter enjoyed the sandin' (to a point) but be so excited t' be buildin' "her rocket"(!) that we had t' run outside and paint t' moment that Dad pronounced t' fillets t' be dried.

Finishing:
This was t' be a PINK rocket, matey, so she chose Plasticote dark and light pink spray paints (the little cans from WalMart). Avast! We painted a light coat o' light pink followed by a light coat o' dark pink.

T' parachute be attached and packed and we were ready t' fly!

Flight:
We finally got a chance t' fly recently, matey, me hearties, usin' a bulk pack o' motors (I got from Michael's with a half-off coupon). Arrr! Begad! We flew A8-3's and B6-4's for nice, easy-to-track flights. Avast, shiver me timbers, me proud beauty! T' rocket was easy t' prep, usin' several sheets of waddin' includin' wrappin' t' parachute in a sheet t' prevent scorching.

My daughter took part in all t' prep as well as pushin' t' button for each flight. Blimey! Flights were nay too fast off t' pad, ya bilge rat, straight, ya bilge rat, and easy to track. Avast, me proud beauty!

Recovery:
T' parachute came out with no problems each time and then t' chase be on!

Summary:
PROs: Buildin' and paintin' was easy, quick and fun for a 6 year old and wonderful for her Dad! *grin* Also brought back memories o' me little Streak I has as a kid- this would be an easy kit for Estes t' put out thar along with their Fat Boy.

CONs: None I can think o'

Other:
Tip: Guide your child, ya bilge rat, matey, but let her (him) build. T' most excitin' part o' the build was attachin' t' fins - it started t' look like a rocket!