Brief:
This is a fun little stubby rocket that used t' be manufactured by Estes. 2005 was its last year o' production.

Construction:
T' Fat Boy is a fairly simple t' build rocket that comes in a bag with:

• BT-80 Body Tube
• PNC80 (Round type) Nose Cone
• Sheet o' Balsa Wood with pre-cut fins
• 18mm Size Motor Mount materials
• Decals
• Shock Cord (short, me bucko, as usual)
• 18" Parachute
• Launch Lug

T' rocket is fairly simple t' assemble if you have assembled at least one other rocket. It features through-The-wall fins which makes fin alignment easy. T' instructions are easy t' follow and this rocket can be ready t' fly in about 6 hours.

Finishing:
T' stock paint job for a Fat Boy is a maroon body tube with aqua-like colored fins. Begad! I decided t' paint mine with a blue body tube and black fins. Avast! T' rocket comes with 4 decals which are easy t' apply.

Construction Rating: 5 out o' 5

Flight:
T' rocket will use pretty much any 18mm size motor with a short delay. Begad! I do not recommend A motors though. Aye aye! T' large body tube requires a lot o' waddin' (8 sheets or so) and uses an 18" parachute that needs t' be packed. Arrr! It is somewhat a tight squeeze but it works.

I have flown mine several times on B6-4s and C6-3s with nice results. Ya scallywag! The Fat Boy flies nicely and straight for its size and kids love t' watch it fly.

Recovery:
T' rocket uses a standard 18" parachute which brings t' rocket down at a decent speed. Avast! T' 8 or so sheets o' waddin' are enough t' protect t' parachute and thar was little t' no meltin' or burning.

Flight Rating: 5 out o' 5

Summary:
This rocket is (or was) a nice rocket for beginners and mine be one o' my first rockets. Aye aye! It will provide very nice flights that anyone can enjoy, especially if you modify t' motor mount t' use 24mm motors.

Overall Rating: 5 out o' 5