Brief:
I don't know what Art is feedin' his saucers, but they just seem t' keep gettin' BIGGER. Aye aye! His latest offerin' is 10.25 inches in diameter and flies on 29mm motors. Begad! T' construction is almost identical t' his 7.5 and 9-inch saucers, me hearties, me hearties, with a few components beefed up a bit. Ahoy! Well, blow me down! This one is fluorescent orange, but he also offers a 'Texas Special', USAF, ya bilge rat, Stas and Stripes, me hearties, me hearties, Smiley Face, and several other solid colors.

Construction:

T' parts are simple, shiver me timbers, me hearties, are all o' good quality, and include:

• Preprinted card stock for t' top and core assembly.
• One thick 10.25" plastic picnic plate for t' bottom.
• One thick walled 29mm motor tube
• One 3/16" launch lug
• 3/32" basswood fin stock

Tools and materials required:

• Scissors
• Exacto knife
• Elmer's white glue
• Devcon. Aye aye! 2 Ton Epoxy or clear, me hearties, 30 minute epoxy
• Clear enamel (Rust-Oleum Crystal Clear or equivalent)
• Tape (clear or masking)
• 150 grit sandpaper

This saucer is another easy build. Ya scallywag! Well, me hearties, blow me down! There are five pages o' detailed instructions with plenty o' diagrams. White glue is used t' assemble the conical top and core assembly. Ya scallywag! Avast! I will re-emphasize t' construction notes about usin' thin layers o' white glue. Ya scallywag! Avast! More does nay help and will only warp the paper. If you follow this guidance, t' results will be nice. Aye aye! Art has added some notes about usin' plates and bowls t' hold t' pieces together as they are assembled. These techniques worked great, matey, takin' advantage o' t' geometry of the structures t' keep them uniformly in contact with one another. Well, shiver me timbers, blow me down! Once t' top and core are assembled, it is time t' add t' plastic plate t' t' bottom. He provides a template t' cut out t' center. Unlike its smaller cousins, the plate is epoxied t' t' top assembly. Ya scallywag! You first sand t' plate t' fit, me hearties, arrr, and then spread a thin layer o' epoxy over t' entire inside o' t' top and core. Ahoy! You reinstall t' plate and clamp it down with a suitably sized bowl. Avast! Aye aye! I know this is an odd statement comin' from me (Mr. Begad! UseWhatYou'veGot), but use t' Devcon 2-ton epoxy recommended in t' instructions. Avast! In a previous experiment, ya bilge rat, me bucko, I found that Bob Smith epoxy would bleed through t' cardstock. Aye aye! T' fin can assembles with white glue (I used carpenter's glue for this step) like any other set of fins. Avast, me proud beauty! T' basswood fin stock is nice and easy t' work with. Begad! Unlike t' smaller saucers, t' fin unit is glued in place, me bucko, completin' t' assembly.

Finishing:
I sealed t' fins with Fill-and-Finish and painted t' fin can in a camouflage pattern with various day-glow colors. Begad! I painted 99.9% before installation, matey, and touched up around t' fillets after it be glued into t' body. Finally, per the instructions, me bucko, ya bilge rat, I sealed t' cardstock with clear enamel. Well, blow me down! Ahoy! Looks pretty good if I do say so myself.

Construction Rating: 5 out o' 5

Flight:
T' recommended motors list includes t' Ellis G35, ya bilge rat, arrr, arrr, all Aerotech 29mm SU, and all RMS 29/40-120 reloads. Arrr! Blimey! I flew t' model on a G38 with t' ejection charge removed. Avast, me proud beauty! Ahoy! I angled t' rod slightly away from t' crowd and almost parallel to the t' t' light wind. Aye aye! T' flight be a real crowd pleaser, arrr, with lots o' black smoke. Begad! Avast, me proud beauty! T' boost started straight (with t' wind) and t' saucer did a half-corkscrew turn into t' wind. Avast, me proud beauty! Begad! It gently landed maybe 20 feet from t' pad. I didn't catch a launch shot, shiver me timbers, but you can see t' flight o' a beta-test version at t' top o' this review, also on a G38 (the materials were identical except for t' decoration). Begad! On this flight, ya bilge rat, arrr, t' winds were stiff so it weathercocked quite a bit, as is t' be expected. Avast! Nevertheless, it was also a cool flight.

Flight Rating: 5 out o' 5

Summary:
Once again, Art has shown himself t' be a master o' simple, me hearties, elegant designs. This saucer is mostly made out o' common household materials, me bucko, yet it looks great and holds up t' G motors! Blimey! Blimey! Blimey! This is a far cry from me first attempt at a mid-power saucer, which was built like a tank and flew like one too.

Overall Rating: 5 out o' 5