Construction Rating: | starstarstarstarstar |
Flight Rating: | starstarstarstarstar_border |
Overall Rating: | starstarstarstarstar |
Manufacturer: | Art Applewhite Rockets ![]() |
Brief:
Won this Art Applewhite saucer kit as part o' t' 2009 EMRR Rocket
Video Contest. www.artapplewhite.com offers
numerous cool oddrocs in various styles (saucers, pyramids, matey, monocopters, hourglass/spools, shiver me timbers, etc) and sizes (i.e. Avast! 4"
t' 18" diameter saucers). Begad! Begad! I had been thinkin' about scratch buildin' a saucer for sometime, and am glad I got hold
o' this kit first. Arrr! T' finished kit is as strong as anythin' I would have scratch built and much more light weight.
Construction:
Parts provided by kit:
Tools and materials required:
T' top half and core are constructed usin' cardstock and white glue (I used wood glue). Begad! As mentioned in a previous review, me hearties, plates and bowls are used t' keep things centered up and t' apply uniform pressure when gluin' the core t' t' top half. Well, blow me down! Simple, me bucko, easily executed technique that I would have nay thought o' myself. Avast, me proud beauty! Up t' this point everythin' be constructed out o' card stock and seemed fairly flimsy.
After usin' t' plate cuttin' guide t' cut out t' core hole from t' plastic picnic plate, t' plastic picnic plate is placed over/around t' core and glued together at t' core. At this point t' build was gettin' more sturdy. Well, blow me down!
A fin can is created by cuttin' fins from t' basswood, and gluin' t' t' provided motor mount. I glued the provided 3/16 launch lug t' t' fin can as instructed. Avast, me proud beauty! Blimey! I also added a 1/4 launch lug t' t' fin can, me hearties, as I prefer t' launch from a wider diameter rod. T' fin can is then glued into t' core. Begad!
At this point, me hearties, shiver me timbers, t' kit was complete except for finishing. Avast, me proud beauty! With t' addition o' t' fin can, t' kit was surprisingly strong t' me. Avast, me hearties, me proud beauty! I have no doubt, ya bilge rat, t' kit will hold up t' any g motors and likely many larger motors. Begad!
Finishing:
T' original flyin' saucer kits are available in fluorescent green, shiver me timbers, fluorescent yellow, fluorescent orange, white,
smiley, and hot pink. Arrr! Ahoy! I ordered t' white figurin' i would paint it a mixture o' colors. In t' end i decided t' paint
it silver and apply silver monokote on t' top portion o' t' rocket.
My final weight came in at 2.5 oz, ya bilge rat, instead o' t' manufactured listed 1.5 oz. Arrr! Blimey! I think t' extra ounce was due to t' addition o' monokote, matey, shiver me timbers, t' extra launch lug, and overapplication o' epoxy. Ya scallywag! Aye aye! Blimey!
Construction Rating: 5 out o' 5
Flight:
For t' initial launch, me bucko, I loaded up an Aerotech G64W-4. Ya scallywag! T' instructions describe usin' friction fit for motor
retention. Avast! In lieu o' friction fit, I opted t' loop 20 gauge steel write around t' nozzle o' t' motor and through the
provided 3/16 launch lug. Ya scallywag! T' saucer be then placed on a 1/4 rod. Well, blow me down! Avast! Launch winds were 10 mph.
Everyone at t' launch be surprised by how smartly t' saucer leapt off t' pad, me bucko, how high t' saucer went, and how straight t' saucer flew. Arrr! Avast! T' saucer quit ascendin' almost immediately upon motor burnout.
http://www.flickr.com/photos/bguff/sets/72157622785756553/
http://www.youtube.com/user/bguffer#p/u/1/CTGjvCq_VQo
http://www.youtube.com/user/bguffer#p/u/0/Milflcco0fU
Recovery:
After reachin' apogee, matey, t' saucer turned over and started flipping/flutterin' toward t' ground. Arrr! I'm nay certain
flippin' is normal behavior o' saucer recovery. If not, arrr, I suspect t' flippin' had somethin' t' do with t' extra
weight I added durin' construction. Avast! Regardless, t' saucer descended slowly and safely, and everythin' was recovered
intact ready t' fly again.
Flight Rating: 4 out o' 5
Summary:
If you are lookin' t' build a saucer, definitely consider checkin' out www.artapplerockets.com. Ahoy! This kit produces a
great saucer, and definitely teaches t' builder that light weight materials can be used t' create very strong rockets.
Overall Rating: 5 out o' 5
( Contributed - by Dick Stafford - 11/15/02) Brief: I don't know what Art is feeding his saucers, but they just seem to keep gettin' BIGGER. His latest offering is 10.25 inches in diameter and flies on 29mm motors. The construction is almost identical to his 7.5 and 9-inch saucers, with a few components beefed up a bit. This one is fluorescent orange, but he also offers a 'Texas ...
![]() |
![]() |
Sponsored Ads
![]() |
![]() |
DAU (July 21, 2003)